Rare, Vintage Thermal Plastic Softener Heater, Unique,versatile Materials Warmer

US $295.95

  • Albuquerque, New Mexico, United States
  • Jan 30th
THERMAL PLASTIC SOFTENER WARMER UNIQUE, VERSATILE MATERIALS HEATER (Eyeglass Frames & Earpieces - Other Materials) Used and in very good condition (shown resting on a posing block). Rare, Vintage, Unique and very Versatile Thermal Plastic Softener Warmer, Material Heater. Has no make or part #. While originally designed for adjusting, shaping and sizing eyeglass frames and earpieces, this electric heater tool is great for many other uses, especially for crafters, modelers, and laboratory technicians. Silvery post is aluminum, base is steel (with minor corrosion on bottom). Post is labeled with size numbers: 36 (top), 38 40, 42 and 44 (bottom). Tapered part of post is 4-3/8" long. Post has an oval or oblong cross section (about 1-1/4" x 1-3/8" at its top and 1-11/16 x 2" at bottom of taper), because eyeglass lens holes are mostly oval or oblong. Hole at the top is also oval or oblong - about 1/4" x 3/8" and about 6" deep. (In left image, the device is lying down with the post top resting on a poser for more accurate taper perspective.) Eyeglass frame tolerances are not that great and vary between frames, so you can have a situation where an eyeglass lens is a little too large in one or both dimensions to fit into the frame. Trying to adjust a cold plastic frame or earpiece can easily result in cracking and even breaking the plastic, ruining the frame. Back in the day, eyeglass frames were adjusted, shaped and sized using a thermal tool like this - now very rare. To shape a frame's eye hole, one places eye hole over the heated post and then slides it down to the appropriate size, then gently works the frame into the right size and shape. The frame lens hole shape need not be the exact same shape or size as the oval/oblong post cross section as the frame can be manipulated to contact only that part of the post needed to shape and size it. This thermal heater also works great with eyeglass earpieces. The earpiece is briefly inserted into the hole at the top, then remove the earpiece, and while it is still warm, gently adjust and shape it for fit. This unique thermal device has countless other great uses, especially for crafts people, modelers and laboratory technicians. One is not restricted to plastic eyeglass frames and ear pieces, but other plastic types of loops, bends and spirals can also be used with it. Also great for shaping and curving plastic rods and tubes to fit desired designs and uses. We used this to make curved black eyebrows for a mannequins, and for doing interesting Christmas, Easter and Thanksgiving decorations, exhibits and displays (e.g. Christmas tree hangers). Can also be used for decorations and displays for birthdays, other special occasions, science projects and displays, theater sets, and even Halloween. Can also be used to melt plastic to seal plastic boxes and similar, holes in plastic, plastic seals, plastic tube tops, and the ends of nylon cords and webbing. Device can also be used to attach or repair loosened decals and patches with melt glue on them, such as caps, hats, shirts and jackets, even to quickly iron wrinkled ties and ribbons, and is great for heatshrink tubing (especially great for large sizes, thick, multi-walled and adhesive-lined heatshrink tubing). And for uses and areas where you need high localized heat but don't want blowing air with it. And this thermal heater works with some rubbers and some woods. While it get very hot, we have not attempted to use it to bend chemistry lab glass or to melt solder or hot glue sticks. Can also be used as a temporary and emergency space heater, hand warmer, dry towel warmer, or small area heater to prevent pipes from freezing. NOTE: This device requires some practice and skill to optimally use for eyeglass frames or model-making or crafts-type work. It only works well with materials which soften with heat. Since a few plastics and other materials do not soften with heat, some of which can be damaged by heat, cautiously test your materials first. In many cases, experimentation is required for optimum matching of materials to this device, and to develop good material shaping and sizing skills, but once you get the knack for using it well, it is a real joy and time saver to use. CAUTION: This device is a heater that gets hotter than some soldering irons - hot enough to seriously burn flesh and damage property, and possibly cause a fire if tipped over or something flammable comes into contact with its hot parts. Use only indoors on a clean, clutter-free, dry, level, smooth, non-flammable and sturdy desktop or work bench top, and safely away from flammables, pets, children, and those who might contact with it or use it carelessly or not responsibly. Use only with thermally-protective gloves and eyewear, and in a dry and well-ventilated area. Turn On only during periods of use. Do not leave turned On or hot unattended. Store only disconnected and cold in a safe, dry environment. LIMITED QUANTITY. We have only one of these left to sell. one of these. Consumertronics.net welcomes you! Thank you very much for considering our Off-The-Shelf Items. We have 1,000s of handtools, power tools / electrical tools / electronic tools, test equipment / meters / gauges / testers, other mechanical devices (including many valves and other laboratory plumbing and industrial plumbing), and specialized materials - all in stock here at our techzonics.com Online Super Store (ABQ Techzonics, Albuquerque, NM). Some of these devices and special materials originated from Lone Star Consulting, Inc. of El Paso, TX (lonestarconsultinginc.com) - legendary researchers into mind control, electronic attack and electronic harassment. Please visit our many other eBay offers. Should we not now have listed on eBay the tool, device or material you need, please email us, and if we have it to sell, we will try to list it on eBay. Should this Item be what you seek but you need it in a different quantity, please email us, and we will try to list it on eBay in the quantity you need. We are technical professionals to serve YOUR High-Tech Survival & Security needs. --- backed by 25+ Years of Top Professional Experience! --- PAYMENT, SHIPPING, GUARANTEES & OTHER POLICIES:        PAYMENT: We accept payment in full by PayPal. If you wish to pay us some other way, email us before buying this Item for our explicit prior approval. We are a Verified PayPal Merchant. We treat Approved PayPal same as cash. PAYPAL LIMITATIONS: (1) No foreign PayPal over $49 without prior approval. (2) No PayPal paid for by credit card over $49 without prior approval. (3) No Unverified Address PayPal over $99 without prior approval. We reserve the right to refuse any form of payment without liability. We must receive acceptable payment within 10 days of auction close or no +fb. If the Item is to be shipped to a New Mexico address, include additional New Mexico Gross Receipts Tax, based on its current rate. Please do not overpay (due to overpayment scams, we take 3+ months to refund all overpayments greater than $99 or 10% of payment amount, whichever is less).        SHIPPING SCHEDULE: Items are shipped within 4 working days of our notification or receipt of your full payment by PayPal or by other payment type. For all other forms of payment, we ship within 4 working days after payment clearance; other types of  payments require 10+ days to clear.        GUARANTEES: Unless otherwise explicitly forbidden by law or eBay and then only to that extent, our guarantee policies are: If our description is accurate for the Item, no refund is possible. Unless otherwise stated, only the Item itself and its parts and accessories (if any) both described and shown in the image(s) herein will be provided. If you claim that the received Item was not as described, you must specify how the Item significantly differs from our description and give us at least 15 workdays from our receipt of the returned Item to ship you the replacement or repaired Item. We often cannot test every feature of an Item, although we always power-On test electronic and mechanical equipment (but not small parts). We only guarantee the explictly described and tested electronic and mechanical functions of Items we sell - we cannot guarantee that any Item we sell will solve any particular need or problem the Buyer may have. All returned Items must be pre-cleared by email. Many Items are shipped with a uniquely numbered seal attached to them and/or marked with a special phosphorescent dye - all such Items eligible for refund must be received with intact seal and/or dye to be refunded. If the Item is described "as is" or "nonfunctional" in its description herein, no guarantee applies. If you have any questions or concerns, please email us about them prior to buying the Item.        SOME OTHER POLICIES: Unless otherwise stated and excluding Items sold in quantity (e.g. small electronic parts), the image(s) is of the exact Item on sale. All Items we sell are sold for legal utility, educational and/or entertainment purposes only. We make no medical or legal claims, and we do not provide medical or legal advice or opinion. If you provide us more than one address (e.g. your eBay and PayPal shipping addresses differ), we may ship Item to any of your provided addresses without liability. COMBINED WINS! - SAVE MUCH S/H $$$!: Should you buy more than one Item from us and you pay for them all at the same time and they can all be shipped in one package, total S/H will then come to the full S/H for the Item with the highest S/H, and then only half S/H for each additional Item you buy. If we no longer list an Item on eBay we listed before (e.g. Item expired or was bought) or you need the Item in a different quantity, email us and if we still have that Item type, we will try to offer the Item again on eBay and notify you if and when relisted. However, Items do get sold out so we can't guarantee later availabilities - it is always best to buy all that you need right away. Buy all Items when they are available (instead of having to search for them later), and stock up while making one convenient money-saving and time-saving payment. If you believe that an Item we are selling is overpriced and you can document that someone else is selling that same Item on eBay for a lesser amount, then email us and we will seriously consider lowering our price. We sell such a large variety of electronic/computer/office/industrial/scientific equipment/tools/parts/supplies/materials, technical and security publications, and collector's items, so please look at our other eBay sales, including our eBay Store (when established) for other Items you need. All applicable Consumertronics.net policies are on its website. For all questions and comments, please email us. Thanks and best of successes - John J. Williams, M.S.E.E.

Directions

Similar products from Burning & Warming Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies