Rear Window Defogger Tab, Grid Silver Conductive Epoxy For 10 Repairs 10 Grams

US $37.99

Warwick, Rhode Island, United States
Mar 7th

Open on mobile:
QR code

Back-Glass Defroster Electrically Conductive Silver Epoxy Window Defroster Glass Repair Kit 2.5 grams For more information, call (888) 522-6742 we are available 24/7 This Atom Adhesives' Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes: two-part Conductive Tab Repair Epoxy if an existing bed of solder is not on the glass, to bond the tabs onto the glass forming an electrical and structural connection; Grid Repair for scratched or broken defroster lines; This handy kit pays for itself. CURE SCHEDULE: 24 hour @ Room Temperature TYPICAL APPLICATIONS: Busted Auto Parts-Glass New (1) Defroster Repair Kit Reattach separated defroster tabs Repair small cuts in line grid Quick easy repairs. NOTE: There are many YouTube videos that will visually guide you through this process. WINDOW PREPARATION: Begin the repair process by using your soft cloth and window cleaner to thoroughly remove all dirt, dust, dog drool, ice cream smears and greasy hand prints from the rear window. Clean it inside and out because you need to be able to see through the glass to discern the breaches in the grid. More important, you need to give the conductive adhesive a clean surface to stick to. HOW TO REPAIR THE DEFROSTER TAB: The tabs located along the sides of the defroster connect the defroster electrically to the vehicles defrost circuit. One tab is the positive and the other ground. If a tab comes off the defroster this will mean total instantaneous failure of the defroster. 1. Our kit is an epoxy adhesive. To use, carefully clean and dry all surfaces to be bonded from all dirt, dust, debris and hand-prints from the rear window. 2. Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact with a tape or similar for 24 Hours until the adhesive is completely cured. Please, wait 24 Hours before using the defroster. 3. Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4. Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. BENEFITS: 1 year shelf life. Made in the USA. Instructions included. 2 part conductive silver adhesive. Made on demand and ships within 24 hours. Easy 1 to 1 mix ratio for multiple applications. Glue is specially formulated to conduct electricity. Anyone can fix a detached rear window defogger tab. Simply place the luer lock caps back on the syringes and re-use. Inexpensive - saves the cost of having a shop perform the repair. See instruction for contained easy mixing. For more information, call (888) 522-6742 we are available 24/7 Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Atom Adhesives
Keyword 1:	Backglass defroster defogger tab repair kir fix
Model	Window Defroster Kit
Keyword 2:	Antenna repair, Grid, glasses, Auto, car,truck,bus
MPN	Defoster
Keyword 3:	windscreen, Auto repair, fixing, defogger epoxy
Country/Region of Manufacture	United States