RECI 120W Z4 CO2 Engraver Laser Tube, Laser Engraving and Cutting Machine, US $976.00 – Picture 0

RECI 120W Z4 CO2 Engraver Laser Tube, Laser Engraving and Cutting Machine, US $976.00 – Picture 1

RECI 120W Z4 CO2 Engraver Laser Tube, Laser Engraving and Cutting Machine, US $976.00 – Picture 2

Reci 120w Z4 Co2 Engraver Laser Tube, Laser Engraving And Cutting Machine

US $976.00

??, ??, China
Jan 30th

Open on mobile:
QR code

120W CO2 Laser Tube Its output power can reach 115w, Rated power 120w and Maximum power 135w. Maximum10, 000 Hours Life Span Better Performance Higher efficiency Highlights: Output Power: Its output power can reach 115w. The production process of the tube is standardized, so the output power and output model are guaranteed. Its cutting effect and cutting speed is the same as 120w laser tube of other brands. (The other laser tubes are handmade, so the quality is different from one tube to another) Long lifespan: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors) Tube frame: Exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturer.) Length: The length is only 1.4m. It reduces the volume of the machine and minimizes freight cost. (The length of other 80w tubes is 2m. 400mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’ s temperature is 42°C. Its heat productivity is lower than 80w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’ s temperature is 42°C) Very good engraving function: It can compare with 60w laser tubes of other manufacturer. The tube can engrave with 5mA working current when there is still no laser beam in the laser tube. (Other brands: No engraving function) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service) High performance cost ratio: When you buy Reci 100w tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. Operating Instruction 1. Installation Requirement 2. Make sure to follow the operation instructions of model Z4 as shown in the illustration. The dedicated power DY13 should be equipped. The positive pole is in high voltage (The ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. 3. Operation conditions • Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10°C-40°C. • The operating environment: temperature 2-40°C, humidity 10-60%. • Test current is 29mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over-high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. 4. Working Performance • Cutting function. • Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving. 5. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. 6. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. 7. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40°C, and the requested humidity is 10-60%. Pack the laser as in the original way. Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. 8. Tubes operated in wrong way will not be guaranteed by Manufacturer. Specifications for industrial CO2 laser tubes Model CS-LT-Z4 Power Output Rated power 120w and Maximum power 135w Length 47" (1400mm) Outer Diameter ?80mm (3.15") ± 2mm Ignition Voltage 24kv Operating Current Test current is 29mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 8,000 hours if the current is kept below 26mA. Power Stability

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	CS-LT-Z4
Country/Region of Manufacture	China