+ Post new Ad
Recoil Thread Repair Kit 33070 UNC 7/16-14 Wire Threaded insert NEW 2 sets, US $26.00 – Picture 0
Recoil Thread Repair Kit 33070 UNC 7/16-14 Wire Threaded insert NEW 2 sets, US $26.00 – Picture 0

Recoil Thread Repair Kit 33070 Unc 7/16-14 Wire Threaded Insert New 2 Sets

US $26.00

  • Waukesha, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
 RECOIL thread repair kit. UNC 7/16-14  33070 TWO full sets, new in package. Recoils innovative and cost-effective thread repair kits are utilized worldwide in industrial and automotive maintenance situations. Recoil inserts are rolled from high quality stainless steel wire with a diamond shaped cross section, wound to the shape of a spring thread. Once the insert is installed into a tapped hole, it provides a permanent and wear resistant thread in the parent material designed to be stronger than the original thread. The inserts are greater in diameter than the corresponding tapped hole and compress as they are installed. This allows maximum surface contact area with the tapped thread, safely and permanently anchoring the inserts into place. The inserts compensatory action shares the load over the entire bolt and hole, increasing holding or pull out strength. With a Recoil insert in place, load and stress are more evenly distributed. Recoil inserts are installed in four easy steps... 1) Drill the hole. 2) Tap the Hole. 3) Install the insert. 4) Break the tang. MSRP $48.95 Save big on this closeout item! USA shipping only, no PO boxes please. Local pickup available in Waukesha, WI.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Recoil
MPN 33070
Model 33070
UPC 020317330706

Directions

Similar products from Tools for Drilling & Tapping Equipment

Perma Coil 1208-106 Thread Kit 3/8-16 Inch Coarse MADE IN USA

Perma Coil 1208-106 Thread Kit 3/8-16 Inch Coarse MADE IN USA

  • Hayward, California, United States
  • Jan 30th
(2pcs) E864 M10x1.5 3FL DORMER M-CoarseTap HSCo-XP

(2pcs) E864 M10x1.5 3FL DORMER M-CoarseTap HSCo-XP

  • Windsor, Connecticut, United States
  • Jan 30th
Gits Bros MFG Co Chicago Oil Cup Brass Fitting w/Site Glass Dental Cap Misc. Lot

Gits Bros MFG Co Chicago Oil Cup Brass Fitting w/Site Glass Dental Cap Misc. Lot

  • Mercersburg, Pennsylvania, United States
  • Jan 30th
P & W 3/32" PIPE THREADING TAP HS STEEL~4-40 NF~Tapping Cutting Thread

P & W 3/32" PIPE THREADING TAP HS STEEL~4-40 NF~Tapping Cutting Thread

  • San Antonio, Texas, United States
  • Jan 30th
3/16" PIPE THREADING TAP MSS STEEL~10-24 NF~Tapping Cutting Thread

3/16" PIPE THREADING TAP MSS STEEL~10-24 NF~Tapping Cutting Thread

  • San Antonio, Texas, United States
  • Jan 30th
tapmatic 125x drill speeder

tapmatic 125x drill speeder

  • Hesperia, California, United States
  • Jan 30th
ALLIED INDEXABLE #5 SPADE DRILL 60MM SHANK 26.5" LOC 030402 4 (LOC1208) TS12

ALLIED INDEXABLE #5 SPADE DRILL 60MM SHANK 26.5" LOC 030402 4 (LOC1208) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
ALLIED INDEXABLE #4 SPADE DRILL 2" SHANK 22.5" LOC 030402 2 (LOC1209) TS12

ALLIED INDEXABLE #4 SPADE DRILL 2" SHANK 22.5" LOC 030402 2 (LOC1209) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
VALENITE CAT 50 BILZ #3 COMPRESSION TENSION TAPPING CHUCK (LOC1213A) TS12

VALENITE CAT 50 BILZ #3 COMPRESSION TENSION TAPPING CHUCK (LOC1213A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
115 Pcs HSS Drill Bits Set, 1/16 - 1/2'' by 64ths, #1 to 60, A to Z, #0422-0003

115 Pcs HSS Drill Bits Set, 1/16 - 1/2'' by 64ths, #1 to 60, A to Z, #0422-0003

  • TORONTO, ONTARIO, Canada
  • Jan 30th
5 Pcs of 1/2'' - 13 UNC HSS Combined Tap & Drill, #TD-1/2-13x5

5 Pcs of 1/2'' - 13 UNC HSS Combined Tap & Drill, #TD-1/2-13x5

  • TORONTO, ONTARIO, Canada
  • Jan 30th
1/4'' - 28 UNF HSS Combined Tap & Drill, #TD-1/4-28

1/4'' - 28 UNF HSS Combined Tap & Drill, #TD-1/4-28

  • TORONTO, ONTARIO, Canada
  • Jan 30th
1/32 - 5/8'' 6JT Precision Keyless Drill Chuck, Accuracy 0.0055", #0222-0880

1/32 - 5/8'' 6JT Precision Keyless Drill Chuck, Accuracy 0.0055", #0222-0880

  • TORONTO, ONTARIO, Canada
  • Jan 30th
Enco HR-1 Tapping Head

Enco HR-1 Tapping Head

  • San Elizario, Texas, United States
  • Jan 30th
PROCUNIER Tapping Head Series 14006 Model 4 Series F

PROCUNIER Tapping Head Series 14006 Model 4 Series F

  • Coventry, Rhode Island, United States
  • Jan 30th
"PROCUNIER" Lead Screw Assembly 48 Pitch

"PROCUNIER" Lead Screw Assembly 48 Pitch

  • Coventry, Rhode Island, United States
  • Jan 30th
Greenfield 3/4-10NC GH3 HSS-E DA108 Bottom Tap

Greenfield 3/4-10NC GH3 HSS-E DA108 Bottom Tap

  • Bonham, Texas, United States
  • Jan 30th
Helicoil Thread Repair Kit 5/8-18 UNF New Old Stock

Helicoil Thread Repair Kit 5/8-18 UNF New Old Stock

  • Waterloo, Illinois, United States
  • Jan 30th
USA!! COIL-SERT 8-32 THREAD REPAIR KIT - #IK401-2

USA!! COIL-SERT 8-32 THREAD REPAIR KIT - #IK401-2

  • Chino, California, United States
  • Jan 30th
hypneumat S200ahb Drill Heads,controls,feeder,built For Double End Drilling

hypneumat S200ahb Drill Heads,controls,feeder,built For Double End Drilling

  • Missoula, Montana, United States
  • Jan 30th

People who viewed this item also vieved

Bridgeport Draw Bar Lot

Bridgeport Draw Bar Lot

  • Wilmington, Massachusetts, United States
  • May 27th
3/32" X 4" Diameter X 1" Arbor Reground Milling Saw, Straight Tooth

3/32" X 4" Diameter X 1" Arbor Reground Milling Saw, Straight Tooth

  • Abingdon, Maryland, United States
  • May 27th
R8 SHANK x 3" dia CARBIDE INSERT END MILL r 8 tool holder TPG 322

R8 SHANK x 3" dia CARBIDE INSERT END MILL r 8 tool holder TPG 322

  • Milroy, Indiana, United States
  • May 27th
Carboloy TE-12-3P INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4" Shank

Carboloy TE-12-3P INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4" Shank

  • Oxnard, California, United States
  • May 27th
Carboloy MTVOL-12-4 INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4" Shank

Carboloy MTVOL-12-4 INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4" Shank

  • Oxnard, California, United States
  • May 27th
Valenite SD-TMR-12-4 3-4 INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4"

Valenite SD-TMR-12-4 3-4 INDEXABLE TURNING LATHE CENTER TOOLHOLDER 3/4"

  • Oxnard, California, United States
  • May 27th
10" x 14" Marvel titing Vertical Band Saw Band Saw, Model 10VA,

10" x 14" Marvel titing Vertical Band Saw Band Saw, Model 10VA,

  • Somerville, New Jersey, United States
  • May 29th
Doall 18" Model ML vertical band saw blade welder HVAC sheet metal machine

Doall 18" Model ML vertical band saw blade welder HVAC sheet metal machine

  • Chicago, Illinois, United States
  • May 29th
BLACK AND DECKER VERTICAL BANDSAW 1/2 HP. 110 VOLT

BLACK AND DECKER VERTICAL BANDSAW 1/2 HP. 110 VOLT

  • Warrington, Pennsylvania, United States
  • May 29th
TUFLEX LIFT ALL ROUND SLING 5' TYPE EN150

TUFLEX LIFT ALL ROUND SLING 5' TYPE EN150

  • Tonganoxie, Kansas, United States
  • May 30th
Midwest Tool and Cutlery MWT-TND Snips Trim Nail Driver

Midwest Tool and Cutlery MWT-TND Snips Trim Nail Driver

  • San Jose, United States
  • May 30th
AMMCO 7" SHAPER MOTOR PULLEY 2" DIA. 1/2" BORE

AMMCO 7" SHAPER MOTOR PULLEY 2" DIA. 1/2" BORE

  • Hatboro, Pennsylvania, United States
  • May 30th
Saber Belt Grinders

Saber Belt Grinders

  • Spokane, Washington, United States
  • May 31st
Harig surface grinder

Harig surface grinder

  • Roselle, New Jersey, United States
  • May 31st
Bridgeport manual surface grinder, M/N 815, w/8" X 15" magnetic chuck,

Bridgeport manual surface grinder, M/N 815, w/8" X 15" magnetic chuck,

  • Plainville, Connecticut, United States
  • May 31st
Charmilles 310 wire upa 851 4310C

Charmilles 310 wire upa 851 4310C

  • Anoka, Minnesota, United States
  • May 31st
SODICK FS-A3C EDM

SODICK FS-A3C EDM

  • Santa Paula, California, United States
  • May 31st
EZ SPARK ES1208C EDM ELECTRIC DISCHARGE MACHINE

EZ SPARK ES1208C EDM ELECTRIC DISCHARGE MACHINE

  • Santa Paula, California, United States
  • May 31st
ROPER WHITNEY PEXTO Model 17 MANUAL Vintage PUNCH 5 Ton

ROPER WHITNEY PEXTO Model 17 MANUAL Vintage PUNCH 5 Ton

  • Petaluma, California, United States
  • Jun 2nd
Whitney Model 50 Notching Tool 2"x2"x1/4"

Whitney Model 50 Notching Tool 2"x2"x1/4"

  • Ceres, California, United States
  • Jun 2nd
Electric 50 ton enerpac hydraulic press

Electric 50 ton enerpac hydraulic press

  • La Marque, Texas, United States
  • Jun 2nd
Nicholson Swiss Precision Detail File Style #4, "2" Cut

Nicholson Swiss Precision Detail File Style #4, "2" Cut

  • Coventry, Rhode Island, United States
  • Jun 3rd
Nicholson Swiss Made Precision Needle File "2" Cut .082 Dia 4" overall

Nicholson Swiss Made Precision Needle File "2" Cut .082 Dia 4" overall

  • Coventry, Rhode Island, United States
  • Jun 3rd
Sunnen Twelve Honing Stones K8A55 Lot of 6 pcs.

Sunnen Twelve Honing Stones K8A55 Lot of 6 pcs.

  • Halls, Tennessee, United States
  • Jun 3rd
Ridgid 36890 1/2" Die Head Complete 00-R BRAND NEW SEALED MADE IN THE USA!!

Ridgid 36890 1/2" Die Head Complete 00-R BRAND NEW SEALED MADE IN THE USA!!

  • Milwaukee, Wisconsin, United States
  • Jun 7th
NEW SET OF 3 RSVP 5/16 - 3/8 24UNF X 1.5 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

NEW SET OF 3 RSVP 5/16 - 3/8 24UNF X 1.5 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

  • Pomona, California, United States
  • Jun 7th
BROWN & SHARPE SPEED TACHOMETER NO 748- VINTAGE TOOL PATENT NOV 28, 1922

BROWN & SHARPE SPEED TACHOMETER NO 748- VINTAGE TOOL PATENT NOV 28, 1922

  • Winter Park, Florida, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies