+ Post new Ad
Reprap Wilson TS 3D Printer complete frame, no electronics, 200x200x200,Prusa i3, US $3900 – Picture 0
Reprap Wilson TS 3D Printer complete frame, no electronics, 200x200x200,Prusa i3, US $3900 – Picture 0

Reprap Wilson Ts 3d Printer Complete Frame, No Electronics, 200x200x200,prusa I3

US $3900

  • Brooklyn, New York, United States
  • Jun 2nd
Open on mobile:
QR code
 Reprap Wilson TS 3D Printer complete frame, no electronics, 200x200x200,Prusa i3 Upgrade. This Wilson TS complete frame can be used as Prusa i3 upgrade. Include all what you can see on pictures: Assembled frame, mechanical end stops, belts, complete direct drive extruder for 1.75mm filament with MK7 drive gear (Nozzle not included). What you will need to finish: 5- Nema17 step motors 1- Electronics board (RAMPS mount installed) 1- Power Supply 1- Nozzle for 1.75mm plastic 1- Heatbed with cables and thermistor 1- Smart LCD (optional). Sign up for my email newsletters by adding my eBay Store to your Favorites International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. On May-03-16 at 11:07:32 PDT, seller added the following information:

Directions

Similar products from Other Plastic Processing Tools

USED: AEC Whitlock WD series cabinet dryer, model WD150Q. 3/60/460 volt, 150 cfm

USED: AEC Whitlock WD series cabinet dryer, model WD150Q. 3/60/460 volt, 150 cfm

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Lodige Cooler, Model 1210, 42 Cubic Feet Working Capacity, 321 Stainless S

Used- Lodige Cooler, Model 1210, 42 Cubic Feet Working Capacity, 321 Stainless S

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: American Maplan approximate 40mm counter-rotating, intermeshing twin screw

USED: American Maplan approximate 40mm counter-rotating, intermeshing twin screw

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Sakas table saw, model TS110. (3) upacting saws, approximate 10" diameter

USED: Sakas table saw, model TS110. (3) upacting saws, approximate 10" diameter

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Progressive Systems dual rip saw. Approximate 10' wide area, (2) 14" diame

USED: Progressive Systems dual rip saw. Approximate 10' wide area, (2) 14" diame

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Grinder, approximately 14" diameter x 18" wide 3 bolt-on slanted blade ope

USED: Grinder, approximately 14" diameter x 18" wide 3 bolt-on slanted blade ope

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Ball and Jewel Granulator, model CG-812-SCSX. Approximate 8" diameter x 12

Used- Ball and Jewel Granulator, model CG-812-SCSX. Approximate 8" diameter x 12

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Boston Matthews Belt Puller, model C650VT. (2) Manually adjustable belts,

USED: Boston Matthews Belt Puller, model C650VT. (2) Manually adjustable belts,

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Labotek Desiccant Flexible Dryer, Model DCD3000. Approximately 1500 cubic

Used- Labotek Desiccant Flexible Dryer, Model DCD3000. Approximately 1500 cubic

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Automated Assemblies Corp. Robot Arm, Model AX-40 W/E4. Last used picking

Used- Automated Assemblies Corp. Robot Arm, Model AX-40 W/E4. Last used picking

  • Bensenville, Illinois, United States
  • Jun 2nd
Zortrax M200 3D Printer Side Covers - NEW - Ready To Ship!

Zortrax M200 3D Printer Side Covers - NEW - Ready To Ship!

  • San Clemente, California, United States
  • Jun 2nd
Extruder Pressure Heated Bed Spring 8mm for 3D Printer DIY Accessories Precise

Extruder Pressure Heated Bed Spring 8mm for 3D Printer DIY Accessories Precise

  • HK, Hong Kong
  • Jun 2nd
Ultimaker Plus 3d Printer

Ultimaker Plus 3d Printer

  • Glendale, California, United States
  • Jun 2nd
Koch Static Mixer Housing Stainless Steel

Koch Static Mixer Housing Stainless Steel

  • Oxford, Michigan, United States
  • Jun 2nd
Makerbot Replicator 2 3D Printer - Seller Rebuilt, low hours!

Makerbot Replicator 2 3D Printer - Seller Rebuilt, low hours!

  • Charlottesville, Virginia, United States
  • Jun 2nd
Vacuum Forming Oven

Vacuum Forming Oven

  • Shelby, North Carolina, United States
  • Jun 2nd
PVI Thermal Forming Machine (Vacuum Former; Thermal Former; Thermoformer)

PVI Thermal Forming Machine (Vacuum Former; Thermal Former; Thermoformer)

  • Warren, Michigan, United States
  • Jun 2nd
Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

  • Bensenville, Illinois, United States
  • Jun 1st
Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

  • Bensenville, Illinois, United States
  • Jun 1st

People who viewed this item also vieved

HUGE lot of NEW Van Dorn Spare Parts - Seals, O-rings, Rod Kit, Piston Kits,

HUGE lot of NEW Van Dorn Spare Parts - Seals, O-rings, Rod Kit, Piston Kits,

  • Plano, Texas, United States
  • Jan 30th
Dr. Boy 80M plastic injection molding machine

Dr. Boy 80M plastic injection molding machine

  • Sande, default, Norway
  • Feb 13th
Lot of 100 - Purolator EFP Stainless Screens - 2-9/16" 20.016 - AS20016RD02562

Lot of 100 - Purolator EFP Stainless Screens - 2-9/16" 20.016 - AS20016RD02562

  • Red Lion, Pennsylvania, United States
  • Feb 13th
INJECTION MOLDING CONAIR LOADER DB12

INJECTION MOLDING CONAIR LOADER DB12

  • Erie, Pennsylvania, United States
  • Feb 13th
1988 375 Ton Cincinnati Injection Mold Machine fron Abbot Lab

1988 375 Ton Cincinnati Injection Mold Machine fron Abbot Lab

  • Akron, New York, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies