Reverse Flow Smoker

US $4500

  • Beaumont, Texas, United States
  • Oct 25th
To see a video of this bbq smoker in action go to JPlaiaSteelArt on Facebook. I built this smoker myself, this is not a mass produced design. I don't know of any that were built like this.  Main cooking chamber is 3/16" thick new plate steel, the fire box is 3/16" new plate steel, fire box door is 3/8" thick new plate steel. This is a reverse flow smoker with welded in 3/16" steel plate baffle with 1" drain, brass gate valve. Smoke stacks are 3"x3" square tubing. The table is 11" by 28".  Cooking chamber measures 32" wide, 20" deep, and 26" tall. Fire box measures 16" wide, 20" deep, and 16" tall. The top and middle cooking grates are 18" deep, and 25" wide. The bottom cooking grate is 19" deep, and 25" wide. The swivel locking caster wheels are 5", and hold over 300 lbs. each. The rear wheels are no flat style,  8" tires. The top of the cooking chamber and top of the fire box are insulated with 2" thick high temp insulation to keep the heat in. The fire box has a charcoal/wood basket and an ash pan for easy clean up. The door has a black lava lock high temperature gasket to seal in the heat and smoke, as you will see in the video it has no leaks. The smoker was painted with 2 coats of rustoleum black satin 1200 paint.         LOCAL PICKUP ONLY!!!!!!!

Directions

Similar products from Open-Air Barbeque & Smokers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies