US $1,199.99
Condition | New other (see details)
:
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “The shipping box is distressed from freight. There are some spots on the metal as well. Please see photos.” |
Directions
Similar products from Live Centers
USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)
LIGHTLY USED RITEN #14 JARNO CARBIDE TIPPED DEAD CENTER WITH CUT-OUT 432663
Bison Live Center HD SUPER PRECISION Morse Taper #4
SHARS MT2 LIVE CENTER MORSE TAPER TRIPLE BEARING 2 MT .00039" NEW
RITEN MORSE TAPER #3 LIVE CENTER (LOC630) TS8
New Mini Life Center Morse Taper For Lathe Center Finder
MT2 Morse Taper #2 Universal Live Center Set Centers
Live Center #3 Morse Taper (Inv.30150)
2 Live Centers Both #3 Morse Taper (Inv.30151)
Ready Tool Live Center (Inv.30148)
USED GORHAM #16 JARNO TAPER CARBIDE TIPPED DEAD CENTER w/ CUT-OUT (2" POINT DIA)
MT4 MEDIUM DUTY LIVE CENTER #4 TAPER
UNKNOWN BRAND CHECKER & INDEXER, 1" BORE INSERT WITH 5C COLLET, OAL 8"
8" x 35" Brown & Sharpe Bench Centers
ROYAL N/C Quad-Bearing Live Center - Point Length : 1-3/4" Morse Taper: 3 MT
The Ready Tool Co. Live Center (Inv.30145)
People who viewed this item also vieved
Lot of 10 Lyndex R8 Collets, Sizes 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 11/16 3/4"
Schaublin W-20 collets 0.5-20mm 40 pieces
Vintage lot of 6 WELDON Milling Machine COLLETS 3/8 to 1 inch END MILL HOLDERS
Open End Slotted Angle Plate 4-1/2 x 3 1/2 x 3, Set of 2 pieces
Used DadoWiz Precision Router Jig Guide For Dado Cuts ~ Woodworking
General #118-B Machinist Parallel Clamp, Thumb Screws, 2" Opening, 1" Deep, OLD
20 VLIER SSM - 55 1/4- 20 1 to 3 1/2 pounds end force .531" stubby plungers
(3) VINTAGE L.S. STARRETT CO. NO. 161-E CLAMPS- INDUSTRIAL / METAL-QUALITY MADE
CUSHMAN 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT
Atlas 6 Inch Geared Scroll Chuck 4 INCH 3 JAW Part #6613-1 New Old Stock
Vintage Atlas Shaper 7B Pulley & Countershaft S7-124 & S7-106A machinist 7"
SWIVEL BASE FOR MILL VISE / USED
Atlas Shaper brake handle & knob machinist rocker shaft S7-57A Atlas 7B
10 Wedgelock Clecos- 3/16 Spring Cleco Fasteners with 0-1/4 Grip
6” x 6” x 11” CNC Horizontal Tombstone Work Holding Fixture
6” x 6” x 10” CNC Horizontal Tombstone Work Holding Fixture
Faudi Paper Filtration Unit (Inv.17262)
Preston-Eastin RFT-25E 180 Deg. Indexer w/SLC 500 Controller
1 Assorted Lot of Machine Parallels (Inv.34522)
2" x 2-3/8" x 2-3/8" Hardened Steel V-Block Pair Unbranded/Generic
Hertel 1.25" SGTBN Tool Block Blade Holder HBO70075J
PARLEC C40-10SC6 Single-Angle Collet Chuck
ETM 4500079 GFI/ER Floating Reamer Collet Chuck - 1' Straight Shank
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies