Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 0

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 1

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 2

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 3

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 4

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 5

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 6

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 7

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 8

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 9

Ritter M7 Medical/Dental/Tattoo Speedclave/Autoclave, US $1200 – Picture 10

Ritter M7 Medical/dental/tattoo Speedclave/autoclave

US $1200

Greensboro, North Carolina, United States
Jan 30th

Open on mobile:
QR code

This unit is in good condition, Perfect for a doctor/dentist/veterinarian's office or for a tattoo parlor. M7 SpeedClave Features: Safety Door The safety door on this autoclave automatically seals when pressurized and will not allow the operator to open the door until the chamber is safely depressurized. Temperature Regulator The temperature regulator allows the operator to preset the temperature at a desired setting between 250? F (121? C) and 270? F (132? C). This control, acting as a thermostat, cycles the heating element on and off. Temperature Gauge The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in two-degree increments from 80? F (26.7? C) to 270? F (132? C). Low Water Cut-out Switch The low water cut-out switch prevents "dry burning". The M7 autoclave will operate only when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on and cycles on and off during normal operation. Cycle Timer The cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments. Front Draining Feature With our front draining feature, it's easy to clean and maintain. All controls and information are on the front and easily accessible to the operator. INSTALLATION Use on laminate, stainless steel or stone surfaces. Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill the reservoir and for cooling processed trays. SPECIFICATIONS Overall length: 18.12" (46 cm) Overall width: 13.56" (34.4 cm) Overall height: 12.81" (32.5 cm) Countertop area: Minimum depth 16.5" (41.9 cm) Chamber: 7.5" diameter (19.1 cm) - 15" depth (38.1 cm) - 2.4 gal. usable volume (9.0 liters) Trays: Two large -- 12" L x 5.62" W x .88" D (30.5 x 14.3 x 2.2 cm) - One small -- 12" L x 4.12" W x .88" D (30.5 x 10.5 x 2.2 cm) Unit weight: 30 lbs. (13.6 kg) Shipping weight: 39 lbs. (17.7 kg) Water reservoir capacity: 1.31 gal. (4.9 liters) Electrical Requirements: 120 VAC, 60 Hz, 10 AMPS Single Phase - 120 VAC has 1136 watt tubular immersion heater UL and CUL Listed - CSA Certified - 220-240 VAC, 50 Hz, 5 AMPS - 100 VAC, 60 Hz, 12 AMPS

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Midmark
MPN	700M7
Model	Ritter M7
Country/Region of Manufacture	United States