Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 0

Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 1

Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 2

Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 3

Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 4

Rohde Schwarz UPL66 Audio Analyzer + Options B4 B21 B22, by R&S, US $3,565.00 – Picture 5

Rohde Schwarz Upl66 Audio Analyzer + Options B4 B21 B22, By R&s

US $3,565.00

Oceanside, California, United States
Mar 2nd

Open on mobile:
QR code

R&S UPL66 AUDIO ANALYZER *Call (760) 806-6600 to RENT this item* DESCRIPTION The R&S UPL66 (and UPL06) Audio Analyzer performs practically all types of analog measurements, from frequency response to externally controlled sweeps with reference traces, determination of 3rd-order difference frequency distortion, spectral display of demodulated wow and flutter signals, etc. In contrast to many other analyzers the UPL66 is capable of performing real dual channel measurements in the audio frequency range, i.e., there is no need for switchover between two inputs. The Rohde & Schwarz UPL66 and UPL06 models feature excellent specifications: analgo sinewave generation with harmonics of typical -115 dB, spectrum displays with a noise floor below -140 dB for analog and -160 dB for digital interfaces, FFT with a maximum frequency resolution of 0.05 Hz, etc. The R&S UPL66 Audio Analyzer offers a large selection of functions for both analog and digital interfaces (with option B2): Level or S/N with rms, peak or quasi-peak weighting Selective level: The center frequency of the bandpass filter can be swept or coupled to the generator frequency, to the frequences of a multitone signal SINAD or (THD+N): The sum of all harmonics and noise is measured Total harmonic distortion (THD): Single harmonics, all the harmonics or any combination can be measured Modulation distortion to DIN/IEC 2683: 2nd and 3rd Order intermodulation is measured Intermodulation using the difference tone method: 2nd and 3rd Order intermodulation is measured Wow and flutter to DIN/IEC, NAB, JIS or the 2-sigma method where the demodulated signal spectrum is also displayed Polarity test for checking signal paths for reversed polarity Crosstalk DC Voltage Frequency, phase and group delay The UPL66 and UPL06 have the exact same technical specifications with the difference being that the UPL66 does not have a front panel display or keyboard as does the UPL66. The UPL66 is controlled externally. With the addition of option B2, the UPL66 can supply a wide variety of digital test signals: Sine Waves for level and harmonic distortion measurements. The signal can be applied to an equalizer with user-selectable nominal frequency response, e.g., for compensating the frequency response of the test assembly. Two-tone signal for modulation distortion analysis. Various amplitude ratios can be selected and the frequencies are continuously adjustable. Difference tone signal for intermodulation measurements with continuous setting of the center frequency and frequency difference. Multitone signal comprising up to 17 sine waves of any frequency and with the same or different levels Special mutltitone signal comprising up to 7400 frequencies with selectable amplitude distribution. The frequency spacing can be linked to the resolution used for the Fast Fourier Transform, enabling rapid and precise single-shot measurements of the frequency response of a DUT Sine burst signal with adjustable interval and on-time and programmable low level, e.g. for testing AGCs Square sine burst also with adjustable interval and on-time, e.g., for testing rms rectifier circuits Noise with a variety of probability distributions, e.g., for acoustic measurements Arbitrary waveforms for generating any voltage curve of up to 16k points For continuous variation of the test signals the UPL66 offers amplitude and frequency sweeps, and for sine and sine squared bursts, additional sweeps of the interval and the on-time. The UPL66 is also capable of spectrum analysis. The number of samples for FFT can be selected between 256 and 16k binary steps. FFT Zoom is a special feature is digitaly preprocessed to increase the frequency resolution by a factor of 2 to 128 times normal over a selectable range. In this way, a maximum resolution of 0.05 Hz is attained. Any number of software filters can be defined. Common filters such as weighting, are provided as standard. Further filters can be easily programmed in a few seconds by entering the type (lowpass, highpass, bandpass, bandstop, notch, third octave, or octave), frequency and attenuation. The R&S UPL66 was designed for audio measurement of sound cards, multimedia cards, R&D of hearing aids, and production test of audio equipment. Features of the UPL66 include: All interface types: Analog, Digital and Combined Real Dual Channel measurements Maximum Dynamic Range FFT Analysis Jitter Analysis Interface Tester Freely Programmable Filters Versatile Functions Automatic Test Sequences The UPL66 audio analyzer offer increased voltage input range, low-distortion generators, and jitter susceptibility to meet the revised AES17 standard. This unit comes with the following options: B4 GPIB Remote Control B21 Digital Audio Protocol B22 Jitter and Interface Test *All of our equipment has been tested. Additional calibration may be available upon request! Item ships with shown accessories, a power cord and manual on CD (when applicable) PAYMENT AND SHIPPING INFO Warranty Info & Return Policy We strive to exceed our customer's expectations and maintain 100% Positive Feedback. And although we do not use eBay's automated Return Policy, all goods or equipment sold by AxiomTest includea 30-Day Warranty which starts the day the equipment is shipped. So contact us immediately if there is a discrepancy with your order or an equipment malfunction so we can issue a repair, replacement, or refund. All orders also come with a limited 5-day ROR (Right of Return). This ROR is limited to goods found to be non-acceptable due to cosmetic defect (not previously disclosed) or an item not meeting manufacturer's spec as advertised. ROR does not apply to wrong item(s) ordered by customer, equipment that has been misused or damaged by customer's misuse (intentional or unintentional), or any orders damaged in transit. Returns must be shipped with all original packaging and accessories. We will not accept any items with obvious signs of additional wear and tear or internal component alterations. All of our items will ship with “Warranty Void” tamper resistant stickers. If any stickers have been removed or tampered with your refund will be canceled. Please include your RMA # on the packing slip, way bill, or package. *CUSTOMER RESPONSIBLE FOR ANY AND ALL RETURN SHIPPING COSTS* Payment Options Domestic Buyers - PayPal, Wire Transfer, Money Order, Company, Bank, or Personal Check. International Buyers: PayPal or Wire transfer only. All funds must be in US Dollars. Unsecured funds must clear prior to shipment. Wire Transfers subject to a $25 service fee. Shipping Unless noted otherwise, all shipments are done through FedEx. If you would like to utilize your ownshipping account please notify us PRIOR to checkout. Saturday and Residential delivery may be available at an additional third party charge depending on the shipping method you choose. We offer shipping outside of the United States. However, some international laws prohibit us from shipping certain items to certain countries. Additionally, not all countries are supported by our service provider. You may also elect to use your own carrier, but we'll be responsible for providing the correct documentation and scheduling the pickup. We are not set up to ship via USPS, and we will NOT falsify any import documents for international orders - no exceptions. Please note: In all sales where an item is prohibited to ship internationally to a successful buyer, that buyer will be notified of non-shipment and a full refund will be made. We reserve the right not to ship any item internationally that is controlled by the US Department of Commerce’s laws and regulations and deemed non-shippable to that region of the world or to listed individuals. eBay's International Shipping calculations do not include any additional duties, fees, or VAT that may be associated with importing this item into a foreign country - please bid accordingly Sales Tax California residents will be charged sales tax if no resale or tax exempt form is submitted prior to payment. TRIED, TESTED...ACCEPTED.

“Equipment has been tested and is fully functional with a 30-day Warranty”

Brand	R&S
Manufacturer	Rohde & Schwarz
Model	UPL66
Type	Audio Analyzer
Country/Region of Manufacture	Germany