Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 0

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 1

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 2

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 3

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 4

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 5

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 6

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 7

Romaxx WD-1 CNC Router. New 2014 - Less than 1 hour of run time., US $1700 – Picture 8

Romaxx Wd-1 Cnc Router. New 2014 - Less Than 1 Hour Of Run Time.

US $1700

Bennett, Colorado, United States
May 5th

Open on mobile:
QR code

CNC Router. Less than 1 hour of run-time. Includes all software required to program and operate machine. Very simple to use, set-up and program. Also includes custom built machine stand and $400 in carbide routing end-mills. Romaxx WD-1 CNC Router Weight 225.00 lbs Mach 3 Software License Router: Dewalt 611 Spindle Bracket: Dewalt 618 3.5" Diameter (double band) Installed MPG Handwheel MPG Handwheel Cast Aluminum Tooling Plate Table Closed Loop System Upgrade Vacfoot Dust Collector Voltage: 120 VAC UC100 USB to Parallel Converter The WD-1 CNC Router pushes the envelope by offering a spacious work envelope. Over 600 square inches in total. Plus higher precision throughout the envelope via precision rolled ballscrews on all three axis. Bridge: 6061-T6 Aluminum Tig welded construction machined square to very close tolerance. Linear system: V-rail system designed in house from O-1 tool steel. The ways are adjustable and provide very stable precise motion with almost no friction or resisitance. Enabling the WD1 to attain its very high rapid speeds. Very smooth traverse Gantry: All 6061-T6 aluminum construction for lighter weight, increased strength and speed, Hard gold anodized finish for durability. All machined components, no bent and drilled parts. Drive system: The WD-1 CNC Router uses precision ballscrew on all three axis. Each motor is coupled to the screws via precision timing belt and pulleys, industry standard setup. A notable feature is that the gantry uses two ballscrews that are "clocked" together to ensure that each leg of the gantry stay in sychonisation throughout the traverse regardless of the location of the cutting force. Using one large motor to drive both avoided the troublesome practice of slaving two smaller motors in the software. All 1018 steel mig welded construction, Black oxide finish with electronics mounted securely on drawer in the cabinet. The table can support a few hundred pounds easily. Specifications: • Travel 20.3? X-Axis -- 30.3? Y-Axis - 6.2" Z-Axis • Rapids 160 X-Axis -- 160 Y-Axis - 160 Z-Axis • Cutting Speeds 160 ipm X-Axis -- 160 ipm Y-Axis - 160 ipm Z-Axis • Cutting Speeds (arcs/curves) 160 ipm for all • Rapids can be set higher up to 220 ipm on each axis. Dimensions: • Table 36x24x8.5 • Overall 38x28x24 • Largest Workpiece any Length by 25 wide by 8.5 tall On Apr-08-15 at 16:52:41 PDT, seller added the following information: We will crate the machine in its original shipping crate, BUYER TO ARRANGE FREIGHT from 80102.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Romaxx
Country/Region of Manufacture	United States
Model	WD-1