+ Post new Ad
RTS Prestige 25542040 Quadruple V Block 4 Way 3-3/4" x 2-3/4" x 1-3/8" NEW, US $19.99 – Picture 0
RTS Prestige 25542040 Quadruple V Block 4 Way 3-3/4" x 2-3/4" x 1-3/8" NEW, US $19.99 – Picture 0

Rts Prestige 25542040 Quadruple V Block 4 Way 3-3/4" X 2-3/4" X 1-3/8" New

US $19.99

  • Saint Charles, Missouri, United States
  • Jun 9th
Open on mobile:
QR code
Manufacturer: RTS Prestige RTS Prestige Item Number: 2554-2040  DESCRIPTION / SPECS: Type -- 4-Way V-Block Sold As -- Matched Pair Overall Length (mm) -- 95.25 Overall Length (Inch) -- 3-3/4 Overall Width (mm) -- 34.93 Overall Width (Inch) -- 1-3/8 Overall Height (mm) -- 69.85 Overall Height (Inch) -- 2-3/4 Magnetic (Yes/No) -- No Minimum Capacity of V (mm) -- 19.05 Minimum Capacity of V (Inch) -- 3/4 Maximum Capacity of V (mm) -- 50.80 Maximum Capacity of V (Inch) -- 2 V Angle (Degrees) -- 90.00 Material -- Cast Iron Squareness Per 1 Inch (Decimal Inch) -- 0.0012 Squareness Per 1 Inch (micro m) -- 30.00 V Parallelism (Decimal Inch) -- 0.0012 V Parallelism (micro m) -- 30.00 CONDITION: New Original Packaging Never Opened
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer RTS Presitge
Model 2554-2040
Country/Region of Manufacture India
MPN 2554-2040
Brand 2554-2040
UPC Does not apply

Directions

Similar products from Supporting Blocks & Sets

TWO - SETS OF TWO 123 BLOCKS

TWO - SETS OF TWO 123 BLOCKS

  • Newbury, Ohio, United States
  • Jun 9th
TWO - TAFT PEIRCE No.153E V BLOCKS

TWO - TAFT PEIRCE No.153E V BLOCKS

  • Newbury, Ohio, United States
  • Jun 9th
NICE! OMER E. ROBBINS 5" PRECISION SINE BAR TACAL-0065

NICE! OMER E. ROBBINS 5" PRECISION SINE BAR TACAL-0065

  • Ellington, New York, United States
  • Jun 9th
Fisher Magnetic parallels

Fisher Magnetic parallels

  • Hubbardston, Michigan, United States
  • Jun 9th
Lot of Magnetic Transfer Blocks/parallels

Lot of Magnetic Transfer Blocks/parallels

  • Cold Brook, New York, United States
  • Jun 9th
MACHINIST TOOL LATHE MILL Machinist Lot of Parallel and Other Set Up Block s

MACHINIST TOOL LATHE MILL Machinist Lot of Parallel and Other Set Up Block s

  • Lakewood, California, United States
  • Jun 9th
Brown & Sharpe Machinist V Block

Brown & Sharpe Machinist V Block

  • Brockport, New York, United States
  • Jun 9th
precision machinist parallel set 1/2" to 1 5/8"

precision machinist parallel set 1/2" to 1 5/8"

  • Newport, Vermont, United States
  • Jun 9th
MACHINISTS PARALLEL SET - 4 PAIR w/Box - Precision/Blocks/Tool Maker/Toolmaker

MACHINISTS PARALLEL SET - 4 PAIR w/Box - Precision/Blocks/Tool Maker/Toolmaker

  • Twinsburg, Ohio, United States
  • Jun 9th
M18 Red Battery and M-12

M18 Red Battery and M-12

  • Jefferson City, Missouri, United States
  • Jun 9th
Tool maker precision V block.

Tool maker precision V block.

  • Statesville, North Carolina, United States
  • Jun 9th
Eclipse V Block Set w/ Clamps Starrett Toolmaker Brown Sharpe

Eclipse V Block Set w/ Clamps Starrett Toolmaker Brown Sharpe

  • Quakertown, Pennsylvania, United States
  • Jun 9th
Starrett No. 54 Hold Downs Thin Work Machinist Toolmaker

Starrett No. 54 Hold Downs Thin Work Machinist Toolmaker

  • Quakertown, Pennsylvania, United States
  • Jun 9th
Tool maker precision sign bar.

Tool maker precision sign bar.

  • Statesville, North Carolina, United States
  • Jun 9th
Starrett 271C V-Blocks & Clamp Set - Machinist/Toolmaker Tool - Used

Starrett 271C V-Blocks & Clamp Set - Machinist/Toolmaker Tool - Used

  • Muskegon, Michigan, United States
  • Jun 9th
PARALLELS LOT 4 PAIRS

PARALLELS LOT 4 PAIRS

  • Arlington, Texas, United States
  • Jun 9th
Brown & Sharpe Machinist V Block No 749

Brown & Sharpe Machinist V Block No 749

  • Edison, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Block s Clamps Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Block s Clamps Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
Toolmaker Precision Micro Adjustable Angle V Vee Block 30° - 0° - 60° MILL LATHE

Toolmaker Precision Micro Adjustable Angle V Vee Block 30° - 0° - 60° MILL LATHE

  • Chino, California, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Brass

MACHINIST TOOLS LATHE MILL Machinist Lot of Brass

  • Morris Plains, New Jersey, United States
  • Jun 9th

People who viewed this item also vieved

LARGE 6" Wide Bullnose LIVE CENTER LATHE OLD WORKS #5 Morse Taper

LARGE 6" Wide Bullnose LIVE CENTER LATHE OLD WORKS #5 Morse Taper

  • Clatskanie, Oregon, United States
  • Jan 30th
COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE BENCH CENTER TOOLING LOT B

COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE BENCH CENTER TOOLING LOT B

  • Waterford, Michigan, United States
  • Jan 30th
COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE BENCH CENTER TOOLING

COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE BENCH CENTER TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
Bullard 46" 4-jaw chuck

Bullard 46" 4-jaw chuck

  • Lewisville, Pennsylvania, United States
  • Jan 30th
S-P Mfg CNC lathe power chuck, 15", 3-jaw, A2-11 spindle mount

S-P Mfg CNC lathe power chuck, 15", 3-jaw, A2-11 spindle mount

  • Lewisville, Pennsylvania, United States
  • Jan 30th
S-P Mfg CNC lathe power chuck, 12", 3-jaw, A2-11 spindle mount

S-P Mfg CNC lathe power chuck, 12", 3-jaw, A2-11 spindle mount

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Four Hold Down Clamps

Four Hold Down Clamps

  • Huntsville, Alabama, United States
  • Jan 30th
36202 20mm Plunger Stroke Push Pull Toggle Clamp 91Kg 200 Lbs Hand Tool 2 Pcs

36202 20mm Plunger Stroke Push Pull Toggle Clamp 91Kg 200 Lbs Hand Tool 2 Pcs

  • Hong Kong, Hong Kong
  • Jan 30th
11421 200Kg 440Lbs Holding Capacity Red Straight Handle Vertical Toggle Clamp

11421 200Kg 440Lbs Holding Capacity Red Straight Handle Vertical Toggle Clamp

  • Hong Kong, Hong Kong
  • Jan 30th
LYNDEX 3J COLLET 37/64" DIAMETER - NEW CONDITION - LOT # NGNT

LYNDEX 3J COLLET 37/64" DIAMETER - NEW CONDITION - LOT # NGNT

  • Isanti, Minnesota, United States
  • Jan 30th
3AT 3-AT Collet "Precision Klutch Kollet"

3AT 3-AT Collet "Precision Klutch Kollet"

  • Bothell, Washington, United States
  • Jan 30th
Hardinge #3 Collet 1/2" - Cataract Lathe / Cataract Milling Machine

Hardinge #3 Collet 1/2" - Cataract Lathe / Cataract Milling Machine

  • Bothell, Washington, United States
  • Jan 30th
24" x 18" x 6" STARRETT PINK-GRANITE SURFACE PLATE - 25165

24" x 18" x 6" STARRETT PINK-GRANITE SURFACE PLATE - 25165

  • Cincinnati, Ohio, United States
  • Jan 30th
24" x 18" x 4" MICROFLAT BLACK GRANITE SURFACE PLATE - #23574

24" x 18" x 4" MICROFLAT BLACK GRANITE SURFACE PLATE - #23574

  • Cincinnati, Ohio, United States
  • Jan 30th
NEW FACTORY SEALED WIREMOLD LEGRAND G4047BT 2-G DUP & TRACJACK MINI AD

NEW FACTORY SEALED WIREMOLD LEGRAND G4047BT 2-G DUP & TRACJACK MINI AD

  • Cedarburg, Wisconsin, United States
  • Jan 30th
EXCELLENT BROWN & SHARPE 1/2" DRIVER DOG TOOL 4 LATHE MACHINIST

EXCELLENT BROWN & SHARPE 1/2" DRIVER DOG TOOL 4 LATHE MACHINIST

  • United States
  • Jan 30th
PHASE II 225-204 5C Spin Indexer, Horizontal, Max Collet 1-1/8", 36 Indexes/KT1/

PHASE II 225-204 5C Spin Indexer, Horizontal, Max Collet 1-1/8", 36 Indexes/KT1/

  • Saint Louis, Missouri, United States
  • Jan 30th
ACCURA/VERTEX APDK-150 AIR POWERED DRAWBAR KIT FOR BRIDGEPORT TYPES R-8

ACCURA/VERTEX APDK-150 AIR POWERED DRAWBAR KIT FOR BRIDGEPORT TYPES R-8

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
4 Piece Set Two Sided Vise Hold Down Clamps

4 Piece Set Two Sided Vise Hold Down Clamps

  • Johnson City, New York, United States
  • Jan 30th
6 INCH 3-JAW ROTARY CHUCK

6 INCH 3-JAW ROTARY CHUCK

  • Columbus, Ohio, United States
  • Jan 30th
Jaw vise

Jaw vise

  • Bowling Green, Missouri, United States
  • Jan 30th
WALTER 31" INDEXING HORIZONTAL ROTARY TABLE RT-800TG

WALTER 31" INDEXING HORIZONTAL ROTARY TABLE RT-800TG

  • La Puente, California, United States
  • Mar 4th
Haas HRT210 Rotary Table, 8.3" Diameter 4th Vf Vmc Milling Cnc Mill

Haas HRT210 Rotary Table, 8.3" Diameter 4th Vf Vmc Milling Cnc Mill

  • Valencia, California, United States
  • Mar 4th
Cleveland Universal Jig Co. 26.5" X 27" X 6.5" Indexing Table Weld T-Slot Jig

Cleveland Universal Jig Co. 26.5" X 27" X 6.5" Indexing Table Weld T-Slot Jig

  • Grand Rapids, Michigan, United States
  • Mar 4th
Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

  • Saint Peters, Missouri, United States
  • Mar 6th
TECNARA TG100 COLLET CHUCK w/ CAT40 SHANK + 3 COLLETS

TECNARA TG100 COLLET CHUCK w/ CAT40 SHANK + 3 COLLETS

  • Covina, California, United States
  • Mar 6th
Young Bros Steel Stamp Set, 1/2, Figures 0 - 9, MADE IN USA | (8C) FRA

Young Bros Steel Stamp Set, 1/2, Figures 0 - 9, MADE IN USA | (8C) FRA

  • Saint Louis, Missouri, United States
  • Mar 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies