SAMSON GTW-35 steam trap, US $100.00 – Picture 0

SAMSON GTW-35 steam trap, US $100.00 – Picture 1

SAMSON GTW-35 steam trap, US $100.00 – Picture 2

SAMSON GTW-35 steam trap, US $100.00 – Picture 3

SAMSON GTW-35 steam trap, US $100.00 – Picture 4

SAMSON GTW-35 steam trap, US $100.00 – Picture 5

SAMSON GTW-35 steam trap, US $100.00 – Picture 6

Samson Gtw-35 Steam Trap

US $100.00

Plovdiv, Kichuk Paris, Bulgaria
Mar 1st

Open on mobile:
QR code

We offer 1pcs. new steam trap for indusrial needs. Manufacturer: SAMSON Model: GTW-35 Size: 1/2 Type: 13E Flow: 0.01-10 bar Max.temperature: 200C For additional information, we have 26 pcs. available. Techical specifics and manual: Application Discharge of condensate from steam-heated systems, heat exchangers, heating batteries, radiators, steam pipes and similar equipment · Liquid evaporation principle · PN 16 · Operating range 0.01 to 10 bar · 200 °C · Usable as either angle or globe valve · Threaded connections Versions The steam traps essentially consist of a body, an operating element and a seat and plug. They are controlled by temperature and pressure and operate according to the vapor-pressure principle (liquid evaporation). Steam traps are commonly referred to as quick-acting condensate drains. The operating element of the steam trap is a metal bellows which is filled with a water/alcohol mixture. Any temperature changes at the metal bellows result in a corresponding change in valve plug position, meaning either a restriction or increase of the free area between the seat and plug. Principle of operation The steam pressure curve related to the liquid/steam mixture in the metal bellows largely corresponds to that of water. When the temperature of the water/alcohol mixture increases, the pressure in the operating element rises. The plug closes the seat orifice. When the steam trap is closed, the accumulated condensate as well as the water/alcohol mixture cool down. The pressure in the operating element decreases, the valve opens and the condensate and any entrained air can escape. The temperature of the discharged condensate is approx. 5 to 10 °C below the saturated steam temperature. Installation – By changing the location of the screw plug (5), the valve can be used as either globe or angle valve. – Only install the steam trap in horizontal pipelines – The direction of medium flow must coincide with the arrow on the body – Install the condensate discharge pipe with a downward slope of approx. 1 % – The steam traps are to be installed directly at the outlet of the aggregate – In aggregates where the heating batteries are to be kept free from condensate, install the steam trap approx. 1 m downstream of the outlet in the non-insulated pipeline

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	SAMSON
Country/Region of Manufacture	Germany
Model	GTW-35
Type	13E