US $95.00
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Manufacturer | Sandvik |
Brand | Coromant | ||
Country/Region of Manufacture | Unknown | ||
Model | S06M-STFCR 2 |
Directions
Similar products from Drilling Heads & Tool Holders
1 USED 1" CARBIDE BORING BAR C16-MCLNR4 TAKES CNMG CARBIDE INSERT 10.5" OAL F554
1-1/2" Shank ID Groover 518665-T-53 7" oal
(Mc) 1-1/2" Shank Boring Bar BL-35-12 CN54 Insert 6" OAL
1-1/2" Shank ID Groover 1B-5-7-1 or 2T-73212 7" oal
Kennametal S24-DCLNR4 Boring Bar 7" long, CN-43 inserts 1-1/2" Shank
WARNER & SWASEY M-621 1 1/2" BORING BAR SLEEVE TOOL HOLDER
FLYNN type OFFSET BORING HEAD 3" ID9571\11-5
DOUBLE END BORING BAR (90/45 DEGREE) 5 PIECE SET (3/8-1 Inch)
Kennametal CV40TB241775 CAT 40 tool holder 3/4" DEVLIEG bits 6 inch mill chuck
Sandvik 1/2" Coromant S08M-STFCR 2 Steel Boring Bar [1 only]
Turning Tool Holder Rt - Lt - Str - 3/4 Bit 1 x 2 12" OAL Lot of 3
Carboloy SI-MCLNR-20-4H Indexable Boring Bar, Through Coolant, 1.25" Shank
Kennametal S10-SCLBR2 Indexable Boring Bar, Carbide Insert, .625" Shank
Indexable Boring Bar, Carbide Insert, .5" Square Shank
Kennametal S12S-SCLCL 3M Indexable Boring Bar, Carbide Insert, .75" Shank
Carboloy SI-MCLNR 28-4H Indexable Boring Bar, Through Coolant, 1.75" Shank
Carboloy SI-MVJNR-24-3H Indexable Boring Bar, Through Coolant, 1.5" Shank
Kennametal B-1606 Indexable Boring Bar, Carbide Insert, .75" Shank
Indexable Boring Bar, Carbide Insert, .75" Shank
People who viewed this item also vieved
CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11698
CAT40 1" DIAMETER ENDMILL HOLDER MORE TOOLING LISTED END MILL CAT 40 LOT C11990
SANDVIK Q-CUT INDEXABLE PARTING TOOL HOLDER 1" SHANK RF123G079-16B
DORIAN NSR 16-2C TOP NOTCH 1" SHANK INDEXABLE THREADING & GROOVING TOOL HOLDER
Bilz WFLK 225 BM/1" tension and compression tap chuck
BILZ TANG DRIVE TYPE 3/8 TAP ADAPTER - QUICK CHANGE SIZE 1
NEW ROSS CONTROL VALVE W6056B3417 FREE SHIPPING
AA ALL AMERICAN 3/4 ID 1" OD SLIP FIXED HARDENED STEEL DRILL BUSHING NOS
NEW .985" HARDINGE S16 ROUND SMOOTH COLLET PAD SET
NEW LYNDEX BT50 BILZ #1 COMPRESSION TENSION TAPPER B5005-0562 BT50-ET0562 BT 50
SMITH TOOL -TAP & REAMER HOLDER
NEW VALENITE CAT50 x PT275-C ANSI COOLANT RETENTION KNOB PULL STUD
CHUCK KEY K3 FOR 3-6-34-SERIES---MADE IN THE U.S.A.---REPUBLIC DRILL CORP.
THREADED HD Mag Drill Chuck - 5/8" For Magnetic Drill - Heavy Duty
HHIP 3900-5457 Quick Change Tool Post, KDK Style-150
KNURLING TOOL KNURLER KNURL HOLDER 3 SETS OF WHEELS " NEW "
Superior hone mandrel (3) A-26-16 , A-22-16, A-16-16
CR 3100 Sunnen CR Mandrel 3.100-3.300
HL3000-2015-T Device 2PH220V 3PH0-220V 1.5KW 7A Spindle motor Engraving machine
Fischer PRECISE collet SC40 D1.5 (Sc42), for PRECISE Spindle SC 40 (SC 42)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies