Servo Bench Model Precision High Speed Drill Press Model #7040 Nice Condition

US $5100

Dickson City, Pennsylvania, United States
Nov 15th

Open on mobile:
QR code

THIS ITEM IS BEING SOLD AS A USED ITEM IN WORKING CONDITION. SHOP TESTED AND WORKING AS IT SHOULD. SERVO PRODUCTS COMPANY PRECISION DRILL PRESS WITH ELBOW AND DEEP THROAT ( INCREASES THROAT TO 9 1/2" ) MODEL NUMBER 7040 SERIAL NUMBER 7944 DATE CODE 9-28-90 2.5 AMP 120 VOLT NO LOAD RPM FROM 200 TO 20,000 0-1/8 ( 0-3 ) ALBRECHT KEYLESS CHUCK OVERALL DIMENSIONS 10" WIDE 18" DEEP 19 1/2 TALL THIS ITEM CAME FROM A MACHINISTS WORKSHOP AND IS IN EXTREMELY NICE COSMETIC AND WORKING CONDITION. THE LAST PHOTO SHOWS THE ITEM DISASSEMBLED, FOR SAFETY IN SHIPPING THIS IS HOW IT WILL COME TO YOU. ALL TOOLING REQUIRED FOR REASSEMBLY WILL BE INCLUDED. APPROX. REASSEMBLE TIME IS 5 MIN. PLEASE LOOK AT ALL PHOTOS TO SEE CONDITION FOR YOURSELF. PLEASE ASK ANY QUESTIONS BEFORE PURCHASING THE FOLLOWING IS SPEC INFORMATION DOWNLOADED FROM THE SERVO WEB SITE, ANY DIFFERENCES FROM MY DESCRIPTION TO THE STANDARD SPECS ARE SUPERSEDED BY MY DESCRIPTION. SERVO PRECISION DRILL PRESS SPECIFICATIONS • Inch and metric versions • Keyless, Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm • WW collet versions for less run out and improved accuracy because tool is supported closer to the spindle; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available • Adjustable, sensitive quill lever allows you to feel the drill in cutting motion for less drill breakage and scrapped parts. • Quill travel (stroke): 1.5" / 38 mm • Infinitely variable spindle speeds 200 to 20,000 rpm over two belt ranges (low ratio: 200 to 4,000 rpm; high ratio: 1,000 to 20,000 rpm (speeds from approx. 10 rpm to 200 rpm available at reduced torque) • Spindle runout: 0.0002" / 0.005 mm TIR • Spindle square to base: 0.0005" per inch / 0.005 mm per cm • Precision ground column with head column lock • Self-contained motor with aluminum housing; on/off switch • Coarse depth dial 1" or 5 mm/division • Dial Gauge 0.001" or 0.05 mm/division for accurate depth control • Dial Gauge zero set knob • Adjustable down stop for blind-hole drilling 0.001" or 0.05 mm/division • Drill capacity: to 1/16" in inconel to 1/8" in steel to 3/16" in aluminum (collet only) • Electrical: 115 volts AC, 50/60 Hz, 2.5 amps