+ Post new Ad
(SET OF 2) COBALT GURHING Series 617 SIZE F TAPER LENGTH DRILL (.257") (735), US $84 – Picture 0
(SET OF 2) COBALT GURHING Series 617 SIZE F TAPER LENGTH DRILL (.257") (735), US $84 – Picture 0

(set Of 2) Cobalt Gurhing Series 617 Size F Taper Length Drill (.257") (735)

US $84

  • Marlton, New Jersey, United States
  • Oct 30th
Open on mobile:
QR code
YOU ARE BIDDING ON A LOT OF (2) NEW GUHRING TAPER LENGTH 130 DEG. COBALT SIZE "F" DRILLS. THESE DRILLS MAY NOT COME IN THE ORIGINAL CONTAINERS UNLESS YOU ORDER AT LEAST (4) DRILLS.  I HAVE A TOTAL OF (10) DRILLS ( 5 LOTS OF 2) AND ONLY (2) GUHRING CONTAINERS SO FIRST COME FIRST SERVED IF YOU WANT THE ORIGINAL BOXES THAT THESE DRILLS CAME IN.   THESE DRILLS LIST FOR $ 39.79 EACH AT MSC AND YOU NEED TO BUY A BOX OF 10 DRILLS.  THESE DRILLS SHIP FOR FREE WITHIN THE CONTINENTAL UNITED STATES! ADDITIONAL SPECS BELOW:  Features and Benefits Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys. Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic. Spiral flutes are constructed with a higher flute angle to remove chips more easily. Specs Drill Bit Size (Letter) F Drill Bit Size (Decimal Inch) 0.2570 Drill Point Angle 130 Drill Bit Material Cobalt Drill Bit Finish/Coating Bright Flute Type Spiral Cutting Direction Right Hand Shank Type Straight Through Coolant Nonthrough Coolant Point Type Split Point Flute Length (mm) 97.00 Overall Length (mm) 148.00 Spiral Type Regular Spiral Shank Diameter (mm) 6.53 Flute Length x Diameter Ratio 10xD Web Configuration Tapered Drill Bit Diameter Tolerance (mm) +0.000 to -0.022 Web Thinning Web-Thinned Specification Number DIN 340 Material Grade M35 Series/List 617

Directions

Similar products from Extended Length Drills

NIB PRECISION TWIST DRILL 35/64" AUTOMOTIVE SERIES HS STEEL TANG DRIVE R09

NIB PRECISION TWIST DRILL 35/64" AUTOMOTIVE SERIES HS STEEL TANG DRIVE R09

  • Gaines, Michigan, United States
  • Oct 31st
10 Aviation Drill Bits FTI CBSD & Cobalt Threaded

10 Aviation Drill Bits FTI CBSD & Cobalt Threaded

  • Kennett Square, Pennsylvania, United States
  • Oct 31st
Reground 7/16" Taper Length Drill Bit, With Tang

Reground 7/16" Taper Length Drill Bit, With Tang

  • Abingdon, Maryland, United States
  • Oct 31st
nEw 12" ~ USA F/.257" Drill Bit ~ lathe machinist aviation aircraft tool

nEw 12" ~ USA F/.257" Drill Bit ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 31st
nEw 12" ~ USA 1/4" , .250" Drill Bit ~ lathe machinist aviation aircraft tool

nEw 12" ~ USA 1/4" , .250" Drill Bit ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 31st
10pcs LONG DRILLS *ILIX 6173* D6 HSS DIN 340 L140 15xD

10pcs LONG DRILLS *ILIX 6173* D6 HSS DIN 340 L140 15xD

  • Radomir, Radomir, Bulgaria
  • Oct 31st
LONG DRILLS *TITEX PLUS A1522* D10.5 HSS DIN 340 TYP UFL L185 11xD

LONG DRILLS *TITEX PLUS A1522* D10.5 HSS DIN 340 TYP UFL L185 11xD

  • Radomir, Radomir, Bulgaria
  • Oct 31st
12" ~ PTD USA 3/16" , .1875" Drill Bits ~ lathe machinist aviation aircraft tool

12" ~ PTD USA 3/16" , .1875" Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 30th
12" ~ PTD USA 5/32" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

12" ~ PTD USA 5/32" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 30th
12" ~ NY USA 1/8" , .125" cobalt Drill Bits ~ machinist aviation aircraft tool

12" ~ NY USA 1/8" , .125" cobalt Drill Bits ~ machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 30th
Cleveland 950E High Speed Steel Extra Long Length Drill Bit Black Oxide Round...

Cleveland 950E High Speed Steel Extra Long Length Drill Bit Black Oxide Round...

  • US, United States
  • Oct 30th
2 PTD Precision Twist 9/16" X 8-1/2" Length Drill Bit HS Black Oxide 1/2' Shank

2 PTD Precision Twist 9/16" X 8-1/2" Length Drill Bit HS Black Oxide 1/2' Shank

  • Huntington, Indiana, United States
  • Oct 30th
CLEVELAND NO. 725 CARBIDE TIPPED HS SHORT SERIES STRAIGHT SHANK DRILL BITS

CLEVELAND NO. 725 CARBIDE TIPPED HS SHORT SERIES STRAIGHT SHANK DRILL BITS

  • Schertz, Texas, United States
  • Oct 30th
Cleveland Twist DRILL BIT No.8, 107570 Extra Long 7", Taper, 6 Flute, FREESHIP

Cleveland Twist DRILL BIT No.8, 107570 Extra Long 7", Taper, 6 Flute, FREESHIP

  • Wills Point, Texas, United States
  • Oct 30th
Forney 20565 Drill Bit Industrial Pro HSS Aircraft Extension, 1/8-Inch-by-6-Inch

Forney 20565 Drill Bit Industrial Pro HSS Aircraft Extension, 1/8-Inch-by-6-Inch

  • USA, United States
  • Oct 29th
12" ~ PTD USA 3/32" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

12" ~ PTD USA 3/32" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 29th
12" ~ NY USA 1/16" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

12" ~ NY USA 1/16" cobalt Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 29th
12" ~ ATM USA #21 / .159" Drill Bits ~ lathe machinist aviation aircraft tool

12" ~ ATM USA #21 / .159" Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 29th
5 pieces of professionally reground HSS endmill 16 mm sealed

5 pieces of professionally reground HSS endmill 16 mm sealed

  • Bangkok, Thailand
  • Oct 29th
nEw 6" ~ USA #21 / .159" Drill Bits ~ lathe machinist aviation aircraft tool

nEw 6" ~ USA #21 / .159" Drill Bits ~ lathe machinist aviation aircraft tool

  • Winston-Salem, North Carolina, United States
  • Oct 29th

People who viewed this item also vieved

Used 31/64 inch Oil Hole Drill 5 inches Long

Used 31/64 inch Oil Hole Drill 5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 31/64 inch Oil Hole Drill 5.5 inches Long

Used 31/64 inch Oil Hole Drill 5.5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 17/32 inch Oil Hole Drill 7.5 inches Long

Used 17/32 inch Oil Hole Drill 7.5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
(#3826) New Machinist American Made 9.70mm Jobber Style Drill

(#3826) New Machinist American Made 9.70mm Jobber Style Drill

  • Troy, Michigan, United States
  • Jan 30th
(#3828) New Machinist American Made 9.70mm Jobber Style Drill

(#3828) New Machinist American Made 9.70mm Jobber Style Drill

  • Troy, Michigan, United States
  • Jan 30th
#20 JOBBERS DRILL .1610 PACK OF 10 .161 DRILL HIGH SPEED STEEL

#20 JOBBERS DRILL .1610 PACK OF 10 .161 DRILL HIGH SPEED STEEL

  • Tulsa, Oklahoma, United States
  • Jan 30th
2 ITW DRILL BITS No.70732 29/64 .4531 7.5" Long FRACTIONAL TAPER LENGTH

2 ITW DRILL BITS No.70732 29/64 .4531 7.5" Long FRACTIONAL TAPER LENGTH

  • Highland Park, Michigan, United States
  • Jan 30th
NEW Package of 12 Precision High Speed Wire Gauge Twist Drill Size 65 71 72 74

NEW Package of 12 Precision High Speed Wire Gauge Twist Drill Size 65 71 72 74

  • Millville, Utah, United States
  • Jan 30th
CARBIDE TIPPED TWIST DRILL , 24.6 MM (.969") , HSS , NEW YORK TWIST DRILL

CARBIDE TIPPED TWIST DRILL , 24.6 MM (.969") , HSS , NEW YORK TWIST DRILL

  • Berlin, Connecticut, United States
  • Jan 30th
LTR "I" Screw machine drill bits pack of 12 135 degree HD Cob

LTR "I" Screw machine drill bits pack of 12 135 degree HD Cob

  • Punta Gorda, Florida, United States
  • Jan 30th
Lot of 6 Screw machine Drill bits 29/64" HS 118 degree

Lot of 6 Screw machine Drill bits 29/64" HS 118 degree

  • Punta Gorda, Florida, United States
  • Jan 30th
Chicago-Latrobe 135° Heavy-Duty Jobber Length Drill Set - 60 PC

Chicago-Latrobe 135° Heavy-Duty Jobber Length Drill Set - 60 PC

  • Sylmar, California, United States
  • Jan 30th
YG-1 CARBIDE DREAM DRILLS INOX DRILL SHORT COOLANT 3XD 5.6X6.0X28X66 DH451056

YG-1 CARBIDE DREAM DRILLS INOX DRILL SHORT COOLANT 3XD 5.6X6.0X28X66 DH451056

  • Minneapolis, Minnesota, United States
  • Jan 30th
YG-1 CARBIDE DREAM DRILLS INOX DRILL SHORT COOLANT 3XD 7.5X8.0X41X79 DH451075

YG-1 CARBIDE DREAM DRILLS INOX DRILL SHORT COOLANT 3XD 7.5X8.0X41X79 DH451075

  • Minneapolis, Minnesota, United States
  • Jan 30th
Machinist Tool: 1 - 3/16" Solid Carbide Drill x 2 3/4" long

Machinist Tool: 1 - 3/16" Solid Carbide Drill x 2 3/4" long

  • Fife Lake, Michigan, United States
  • Jan 30th
#1 MORSE TAPER SHANK #3 DRIL DRIVER #52529

#1 MORSE TAPER SHANK #3 DRIL DRIVER #52529

  • Resaca, Georgia, United States
  • Jan 30th
(#4299) Used Machinist 10.2mm Morse Taper Shank Drill

(#4299) Used Machinist 10.2mm Morse Taper Shank Drill

  • Troy, Michigan, United States
  • Jan 30th
(#4291) New Machinist USA Made Cobalt .317 X .343 Morse Taper Shank Step Drill

(#4291) New Machinist USA Made Cobalt .317 X .343 Morse Taper Shank Step Drill

  • Troy, Michigan, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies