Sheartak Spiralcutter Head, Helical Head Dewalt Dw735 With 40 Carbide Inserts

C $510.00

Waterloo, Ontario, Canada
Jun 24th

Open on mobile:
QR code

Retrofit your planer with Sheartak spiral cutterhead for the benefits: * No tear-out * Reduced noise * 40 to 50 times life se of HSS blades * Easy change-over of carbide inserts in minutes. * Dynamically balanced. Kit includes: * High Tensile Strength Cutter block * 40 carbide inserts installed on 4 spirals. * 4 deeper, wider and glassier helical grooves for easier dust extraction. * Carbide inserts at 15x15x2.5mm R150 standard size for cheaper replacements in the future. * Standard Torx Head T25 screws for maximum clamping. * Extra 5 inserts and 5 screws as spare parts Note: The cutting circle of this spiral cutter head is a bit smaller than that of the original cutter head. The cutter head assembly comes with all the knives installed already and can go through the housing bore for the bigger bearing. Installation of the spiral cutter head is easy. No need to install the carbide inserts yourself. The cons is that the smaller diameter limits the maximum depth to 1/16" per pass. If the cut is heavy, more pressure will be on the rollers and it may flex the table. We recommend this type for hobbyists who are okay with light cuts and don't mind more passes. If you often cut more than 1/16" per pass, we recommend the bigger diameter version we make.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	MPN	S008491
Brand	Sheartak
Max Planing Width	20 in