+ Post new Ad
Sherline Step Block Hold Down Set 3013, US $30.00 – Picture 0
Sherline Step Block Hold Down Set 3013, US $30.00 – Picture 0

Sherline Step Block Hold Down Set 3013

US $30.00

  • Venice, California, United States
  • Feb 23rd
Open on mobile:
QR code
Sherline Step Block Hold-Down Set style clamp set has long been popular on full-size milling machines, and Sherline now produces a nice set suitable for miniature machine tools. The step blocks are notched as are the back of the clamps to make it quick and easy to set your clamps to the proper height. A selection of threaded studs from 1" to 3-1/2" is provided to allow a variety of heights to be selected quickly.  The nut and washer design is a nice touch too. The bottom of the nut is convex while the top of the washer has a matching concave surface. Even if the clamp isn't level, the washer will seat flat on top of it while applying even pressure. Also provided is a spare, unanodized step block that you can cut down to make smaller size step blocks for low setups. At least one set of hold-down clamps should be considered a necessity for every milling machine owner.  Includes a few spare self leveling washers and extra tall nuts.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Sherline

Directions

Similar products from Clips & Jaws

Used 3" Kant Twist T-Handle Clamp Multi Purpose Copper Jaws

Used 3" Kant Twist T-Handle Clamp Multi Purpose Copper Jaws

  • Mountain View, Missouri, United States
  • Feb 24th
2 Small Parallel Machinist Jewelers Clamp 3/4" max Not sure of brand!

2 Small Parallel Machinist Jewelers Clamp 3/4" max Not sure of brand!

  • Darien Center, New York, United States
  • Feb 24th
Starrett No. 123 Master Vernier Caliper 14" with Original wood box.

Starrett No. 123 Master Vernier Caliper 14" with Original wood box.

  • Darien Center, New York, United States
  • Feb 24th
Armstrong Clamp # 713

Armstrong Clamp # 713

  • Grantville, Kansas, United States
  • Feb 24th
6 Used 1" Pony Spring Clamps 3201

6 Used 1" Pony Spring Clamps 3201

  • Portland, Oregon, United States
  • Feb 24th
MITEE-BITE Clamping system TSN-625 T-Slot Clamps Kit

MITEE-BITE Clamping system TSN-625 T-Slot Clamps Kit

  • Strasburg, Pennsylvania, United States
  • Feb 24th
Knu-Vise Welding Clamp 8"

Knu-Vise Welding Clamp 8"

  • Saint Clair, Michigan, United States
  • Feb 23rd
LOT OF U.S.A MADE C -CLAMPS

LOT OF U.S.A MADE C -CLAMPS

  • Covina, California, United States
  • Feb 23rd
Knu-Vise Welding Clamp

Knu-Vise Welding Clamp

  • United States
  • Feb 23rd
metal clamp

metal clamp

  • Reading, Pennsylvania, United States
  • Feb 23rd
2 Machinist's Clamps: J. H. Williams: Vulcan: Heavy Duty

2 Machinist's Clamps: J. H. Williams: Vulcan: Heavy Duty

  • Glastonbury, Connecticut, United States
  • Feb 23rd
2 Machinist's Clamps: Starrett And Lufkin

2 Machinist's Clamps: Starrett And Lufkin

  • Glastonbury, Connecticut, United States
  • Feb 23rd
Vintage W G Lecount #5 "C" Clamp

Vintage W G Lecount #5 "C" Clamp

  • Apple Valley, California, United States
  • Feb 23rd
V Block with 2 clamps

V Block with 2 clamps

  • Saint Louis, Missouri, United States
  • Feb 23rd
**NEW** READY TOOL COMPANY No. 113 CAM ACTION GRINDER DOG **FREE SHIPPING USA**

**NEW** READY TOOL COMPANY No. 113 CAM ACTION GRINDER DOG **FREE SHIPPING USA**

  • Beachwood, Ohio, United States
  • Feb 23rd
New 5 Pcs 1/2 Inches Flange/Hexagon Nuts M12 Clamping Kit Bridgeport Milling

New 5 Pcs 1/2 Inches Flange/Hexagon Nuts M12 Clamping Kit Bridgeport Milling

  • New Delhi, India
  • Feb 23rd
Clamps lot NWT used hardware tools adjustable vise

Clamps lot NWT used hardware tools adjustable vise

  • Union City, New Jersey, United States
  • Feb 23rd
Pair Williams No 406 Drop Forged Steel C-Clamps Made in USA Excellent Free Ship!

Pair Williams No 406 Drop Forged Steel C-Clamps Made in USA Excellent Free Ship!

  • Elkhart, Indiana, United States
  • Feb 23rd
C clamp, Cincinnati Tool, opening about 3-5/8", Superclamp No. 44

C clamp, Cincinnati Tool, opening about 3-5/8", Superclamp No. 44

  • Lapeer, Michigan, United States
  • Feb 23rd
Machinists 2/22 B2 USA Brink and Cotton 4" No 144 Forged clamp

Machinists 2/22 B2 USA Brink and Cotton 4" No 144 Forged clamp

  • Lutz, Florida, United States
  • Feb 23rd

People who viewed this item also vieved

5 PC HARDINGE 5C 5 C COLLETS 25/64" TO 57/64" CAPACITY SIZE RANGE

5 PC HARDINGE 5C 5 C COLLETS 25/64" TO 57/64" CAPACITY SIZE RANGE

  • La Puente, California, United States
  • Jan 30th
6 PC KENT & OTHER BRAND 5C 5 C COLLETS 15/64" TO 63/64" SIZE RANGE

6 PC KENT & OTHER BRAND 5C 5 C COLLETS 15/64" TO 63/64" SIZE RANGE

  • La Puente, California, United States
  • Jan 30th
REGO-FIX SERIES 25, TAP COLLET ER 25-GB .194"

REGO-FIX SERIES 25, TAP COLLET ER 25-GB .194"

  • Caledonia, Wisconsin, United States
  • Jan 30th
6 inch sine bar used

6 inch sine bar used

  • Old Saybrook, Connecticut, United States
  • Jan 30th
HEAVY DUTY 10" x 15" TILTING MILLING TABLE

HEAVY DUTY 10" x 15" TILTING MILLING TABLE

  • La Puente, California, United States
  • Feb 13th
10" SINE BAR Hardened & ground V. GOOD CONDITION

10" SINE BAR Hardened & ground V. GOOD CONDITION

  • Bristol, Connecticut, United States
  • Feb 13th
MACHINIST ECLIPSE VEE VICE # 235 ENGINEERS SMALL VISE TOOL w/box as15

MACHINIST ECLIPSE VEE VICE # 235 ENGINEERS SMALL VISE TOOL w/box as15

  • Rapid City, South Dakota, United States
  • Feb 14th
CHAIN VISE / PIPE VISE, VULCAN NO. 4, J.H.WILLIAMS & CO., steel

CHAIN VISE / PIPE VISE, VULCAN NO. 4, J.H.WILLIAMS & CO., steel

  • Glen Arm, Maryland, United States
  • Feb 14th
HARDINGE CENTER MODEL HDC

HARDINGE CENTER MODEL HDC

  • Cedar, Minnesota, United States
  • Feb 15th
TRADE MARK #2 LIVE CENTER JAPAN

TRADE MARK #2 LIVE CENTER JAPAN

  • Fort Myers, Florida, United States
  • Feb 15th
Riten B&S #7 Carbide-Tipped Solid Dead Center (69407)

Riten B&S #7 Carbide-Tipped Solid Dead Center (69407)

  • Round Lake, Illinois, United States
  • Feb 15th
4" Machinist Vise

4" Machinist Vise

  • United States
  • Feb 15th
C10-ER11M-100L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx100mm

C10-ER11M-100L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx100mm

  • Shen Zhen, China
  • Feb 17th
C10-ER11A-150L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx150mm

C10-ER11A-150L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx150mm

  • Shen Zhen, China
  • Feb 17th
C10-ER11A-120L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx120mm

C10-ER11A-120L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx120mm

  • Shen Zhen, China
  • Feb 17th
Bridgeport Milling Machine Steel X-Axis Table Stop Bracket 2-3/4" x 3.25, M1209

Bridgeport Milling Machine Steel X-Axis Table Stop Bracket 2-3/4" x 3.25, M1209

  • Bristol, Connecticut, United States
  • Feb 28th
Used Jacobs Arbor Adapter from Morse Taper #3 to Jacobs Taper #3, 403-7315

Used Jacobs Arbor Adapter from Morse Taper #3 to Jacobs Taper #3, 403-7315

  • Bristol, Connecticut, United States
  • Feb 28th
Used Edward Andrews Morse Taper #2 Tool Holder, 1" O.D., 3.75" Length, EA66-02

Used Edward Andrews Morse Taper #2 Tool Holder, 1" O.D., 3.75" Length, EA66-02

  • Bristol, Connecticut, United States
  • Feb 28th
Toolmaker's V-Block Milling Machinist

Toolmaker's V-Block Milling Machinist

  • Elmwood Park, Illinois, United States
  • May 27th
Machinist Set-up Paralle bars Lathe, Milling, Work-holding tool chest clean out

Machinist Set-up Paralle bars Lathe, Milling, Work-holding tool chest clean out

  • Rimrock, Arizona, United States
  • May 28th
Used ASSORTMENT of Machinist Parallels

Used ASSORTMENT of Machinist Parallels

  • Westland, Michigan, United States
  • May 29th
HYDRAULIC CUTTER/PUNCH & BENDER

HYDRAULIC CUTTER/PUNCH & BENDER

  • Oakville, Ontario, Canada
  • Jun 12th
Parting Out Shizuoka Mold Master SV-50 Parts BallScrew Spindle Motor Machine Cnc

Parting Out Shizuoka Mold Master SV-50 Parts BallScrew Spindle Motor Machine Cnc

  • Rolla, Missouri, United States
  • Jun 13th
9" FADAL Full 4th Axis with Servo, Servo Drive and CNC Milling Control Card!

9" FADAL Full 4th Axis with Servo, Servo Drive and CNC Milling Control Card!

  • Peoria, Arizona, United States
  • Jun 14th
5C Collet Pneumatic Air Clamping Chuck Fixture Horizontal or Vertical w/ Actuato

5C Collet Pneumatic Air Clamping Chuck Fixture Horizontal or Vertical w/ Actuato

  • Lorain, Ohio, United States
  • May 25th
Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

  • Lorain, Ohio, United States
  • May 25th
Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

  • Duncan, South Carolina, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies