Siemens Ft2015-u3 Remote Terminal Fire Alarm Annunciator For Cerberuspro Systems

US $480.00

New York, New York, United States
Mar 28th

Open on mobile:
QR code

Product Overview The Remote Display Terminals (Models FT2014-U3 / R3 and FT2015-U3 / R3) are remote light-emitting diode (LED) / liquid-crystal display (LCD) units that show the existing status of a Cerberus PRO 252 / 504-point system. A LED will illuminate for any given Alarm, Gas Alarm, Supervisory and Trouble Cerberus PRO- system event. A 2” -x- 4-3/4” LCD screen will give details of the event in alphanumeric form. The display screen can be scrolled to reveal additional events. Optional remote-system-control capabilities are also available. The RDTs (as well as Model FCA2016-A1) are FM (#3010); CSFM (#7165-0067:0259) and FDNY (#6104) Approved. Specifications Each RDT has separate LEDs for Alarm, Gas Alarm, Supervisory, and Trouble events on a Cerberus PRO FACP. Each LED will flash when ‘unacknowledged’ events are present. The LED will change to ‘steady’, upon acknowledgment of the event. Additionally, the remote display terminals have a LED to indicate system power; a separate ground-fault LED, and four (4) additional user-programmable LEDs. There are also two (2) LEDs that indicate the state of audible circuits on the system: ? One(1)LEDtoindicatethatthecircuitsare‘active’ ? One(1)LEDtoindicatethecircuitshavebeen‘silenced’ When the Cerberus PRO FACP is in its ‘normal’ state (with no events present), the screen will annunciate the system ID data, and will show the date, time-of-day. When an event has been triggered to the Cerberus PRO panel, the LCD display will show the following: ? Eventtypeandzone ? Custommessageforthatzone ? Usageofthezone ? ’Unacknowledged’or‘Acknowledged’event In addition to the aforementioned features, the display will show the total number of all types of events present on the system. The display has a backlight feature that operates upon receiving any event information or when any operator buttons are pressed. RS-485 Interface Voltage 3.3VDC Operating Current: ?Normal (Standby mode) Approx. 75 mA ? Alarm Approx. 136 mA Connection Bus structure Communication mode Half-duplex Number of participants Eight (8), max. Maximum wire length 3,937 ft. (1200 meters) C O N N E C T I O N S RS-485 Interface: 4-pole screw terminal ? Design ? Cross-section 12 to 22 American-Gauge Wires (AWG) To the operating unit Plug-in-type connections Power Requirements FT2014-series 24VDC @ 55mA FT2015-series 24VDC @ 55mA

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Type	Control Panels & Keypads
Model	FT2015-U3
Country/Region of Manufacture	China
MPN	S54400-B88-A1
Brand	Siemens