US $19.60
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Monster Tool |
Flutes | 4-Flute | ||
Model | SOLID CARBIDE CHAMFER MILL | ||
Helix Angle | 0 DEGREE | ||
MPN | 209-064500B | ||
Cutting Diameter | 1/2in. | ||
Primary Application(s) | Speciality Cutting | ||
Shank Diameter | 1/2in. | ||
Material | Carbide | ||
Overall Length | 3in. | ||
Coating | AlTiN/TiAIN | ||
Country/Region of Manufacture | United States | ||
End Type | Single End | ||
Country of Manufacture | UNITED STATES |
Directions
Similar products from End Mills Router & Drill Bits
2MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x
1MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x
2 NEW 11/32" DIAMETER CARBIDE ENDMILLS. 2 FLUTE. BALL. USA MADE {F798}
** Poland V Parabolic Milling Cutter Wheel 4" x 3/8" x 1" High Speed ** L@@K!
6pcs 6.3mm-20.5mm 3 flute HSS Chamfer Chamfering End Mill PVC Cutter Bit 90°
Lot 3 pcs 2F Hss EndMills Cutting Dia 11mm Mills and Shank Dia 12mm End Mill
3/8" Data Flute SS30375 Solid Carbide .010CR C4-TiCN 3 Flute End Mill (N 680)
NEW HERTEL 4.01008R101U 8 INSERT FACE MILL MILLING MACHINE TOOL FOR MACHINE SHOP
3/8" Coated 3 Flute High Helix Solid Carbide Endmill - 5ea.
(Lot of 2) 1/4" OSG Solid Carbide TiALN 4 Flute End Mill (N 627)
53lbs Scrap solid cabide endmills
Crystallume P820-200110-1 5/16 Ball Diamond Endmill
Niagara Cutter EDP 61831 1/8x1/8x1/2x1-1/2 5-Flute Solid Carbide NEW USA MADE
1/64" (.0156") CARBIDE 2 FLUTE MICRO ENDMILLS, SQ - NEW Kyocera Microtools
PUTNAM 1-1/4" HS 2 FLUTE END MILL 4" LOC STK 1651
1/2 Carbide Endmill 4F SE ALTIN **4pcs**
Steelex D2703 Solid Carbide End Mill, 1/8-Inch by 4 Flutes Brand New!
5 NEW 1/8" CARBIDE BURRS WITH DRILL POINT END, AMERICAN MADE {131}
1 USA 5/8" SOLID CARBIDE ALUMINUM CUTTING HIGH PERFORMANCE 3 FLUTE END MILL{357}
People who viewed this item also vieved
INGERSO CARBIDE INSERTS CCMT 432 MT PACK OF 10 GRADE IN7310
*** FREE SHIPPING *** ISCAR APKT 1003PDR HM90 IC908 40pcs
50 KENNAMETAL SNGA 434T KY4000 CERAMIC INSERTS O187S
46 KENNAMETAL CNG 643 T KY2000 CERAMIC INSERTS P207S
1.0" Square Shank Indexble Insert Facing Turning Tool SVJCR 163
TRW 1.0" Square Shank Indexble Insert Facing Turning Tool MTBNR 16-4
STRIPPIT Nisshinbo AMADA PUNCH & DIE CE TOOL .984 +.010 E1
STRIPPIT Nisshinbo AMADA PUNCH & DIE CE TOOL .781 +.008 C22
MORSE 1-1/4 Machine Chucking Reamer 11-1/2 Straight Shank 8pt Straight Flute
MORSE 1" High Speed Steel Chucking Reamer Straight Flute 0.750 Reduced Shank
Husqvarna 14" x 5/32" x 1" Metal Cutting Wheel/Blade
8 HSS MILLING CUTTERS - 1-1/4" to 1-3/4"
MICRO 100 Carbide Tip Tool Bit RAD-4 3/8" x 3/8" x 2-1/2" RH Qty 8 [467]
Lot of 49 Machinist Lathe Cutting Bits Tools Carbide Tips ACT Carbaloy Firthite
1 USED duMONT Keyway Broach, 1/8-B HS. MADE IN USA {G8}
1 USED duMONT Keyway Broach, 3/16-C HS. MADE IN USA {G6}
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies