Southbend Ktlg-30 Tilting Kettle, Gas, 30 Gallon, Thermostatic Control, 2/3 Jack

US $20,434.79

South Bend, Indiana, United States
Jan 31st

Open on mobile:
QR code

Tilting Kettle, Gas, 30 Gallon, Thermostatic Control, 2/3 Jacket Sale Price $20,434.79 Shipping FREE! to lower 48 Manufacturer Southbend Model KTLG-30 Warranty Standard one year limited warranty -view pdf Ships in 14 days Questions? 866-446-2930 electrical options 120v/60/1-ph gas options LP gas LP gas > 2000 feet natural gas natural gas > 2000 feet Southbend KTLG-30 Specifications: Tilting Kettle, Gas, 30-gallon capacity, two-thirds jacket, thermostatic control, electronic ignition, 316 stainless steel interior liner, stainless steel exterior, stainless steel console with crank tilt, 1-5/8" diameter stainless steel legs with flanged feet, 100,000 BTU Southbend Range Gas Steam Tilting Kettle Southbend self-contained, gas fired, fully insulated steam jacketed kettle, ASME Code stamped, National Board Registered, AGA, CGA and NSF certified for operation up to 50 PSI. A double wall interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain factory sealed, distilled water. The kettle interior on models 20, 30 and 40 gallon models shall be stainless steel, type 316 for high acid content cooking. The kettle interior on 60 gallon models shall be type 304 stainless steel. Kettle exterior is fully insulated. The bottom of the kettle shall be of hemispherical design for superior heat circulation. The recessed control panel is located on the front right of the unit, in full view of the operator and easy to use. Standard controls include direct immersion thermostat for operation at a temperature range of 165°F to 275°F (74°C to 135°C) at 50 psi, water sight glass, cooking light, pressure gauge and electronic ignition with ignition indicator light. Safety features include low water shut off with indicator light, pressure switch, pressure relief valve and a 100% safety gas shut off valve. The kettle shall pivot on trunnions connected to the tilt mechanism and control consoles. The tilt mechanism shall allow the kettle to tilt past 90° for complete emptying. The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8” (41 mm) diameter stainless steel legs with flanged feet for securing to the floor Manufacturer: Southbend Range Model: KTLG-30 Width: 55.25" Depth: 43.60" Height: 39" Shipping Weight: 900 lbs. Contact Us Phone: 866-446-2930 Email: sales@mychefstore.com Terms and Conditions *All Shipping is only to addresses in the continental 48 states. *Free shipping is to commercial addresses only in the continental 48 states. *Actual images and descriptions may vary from those listed. Prices and availability to Canada, Hawaii and Alaska may vary. Taxes not included for some states.