+ Post new Ad
Starrett 190D Auxiliary Pointed Screw For Little Giant No. 190, US $27.88 – Picture 0
Starrett 190D Auxiliary Pointed Screw For Little Giant No. 190, US $27.88 – Picture 0

Starrett 190d Auxiliary Pointed Screw For Little Giant No. 190

US $27.88

  • Brooklyn, New York, United States
  • Jun 9th
Open on mobile:
QR code
Starrett 190D Auxiliary Pointed Screw For Little Giant No. 190 Jack Screws - Handy for leveling work on planer beds, upright drills, machinery set up and general shop use. They are 1-1/4" diameter at base and have a range from 2-1/4" to 3-3/8" and can raise over 1,000 pounds. The set contains the jack, two extension bases (allows up to 6-3/8" height), auxiliary pointed screw, and two extension bases for irregular surfaces. Product Features: An auxiliary pointed screw is supplied, to be used in place of the screw with swivel cap Dimensions (in): 0.40 X 4.50 X 2.80  Important Information: We offer discounted rates for bulk purchases, please inquire. We combine shipping, please note that certain items cannot be combined. In case you don&rsquot see the shipping rate displayed, please feel free to contact us for a shipping quote. _________________________________________________________________ International Shipping: Ø if you need a super fast international shipping please contact us Ø We do combine shipping, the more you buy the lower the shipping cost.  Ø  International shipping may be subject to a longer handling time.  Ø  Estimated time in transit  is still just an estimate, in some cases items are subject to an extended time in transit due to custom delays, extended inspections in your country or lack of efficiency of the postal service.  Ø  USPS Standard mail or Priority mail are not guaranteed to be trackable, the service which is guaranteed to be trackable is USPS EXPRESS mail. Ø  Most items are shipped with USPS. However, if you prefer a different shipping method, please notify us prior to purchase.  Ø  We cannot be responsible for time in transit, custom fees or for custom delays.  Ø  All international items are insured.     Thank you for Looking!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
UPC 0049659506846
Model 190D
Brand Starrett
Size Type Regular
EAN 0049659506846

Directions

Similar products from Fittings & Plates

(1) Used Phase II 225-204 Spin Crank Index Fixture

(1) Used Phase II 225-204 Spin Crank Index Fixture

  • Albertville, Minnesota, United States
  • Jun 9th
59.5" x 20.75" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate 5 SLOTS

59.5" x 20.75" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate 5 SLOTS

  • Grand Rapids, Michigan, United States
  • Jun 9th
SUBURBAN TOOL 6X12 SINE PLATE SP-612-S2 STK 5527

SUBURBAN TOOL 6X12 SINE PLATE SP-612-S2 STK 5527

  • Wadley, Alabama, United States
  • Jun 9th
HARDINGE 8.75" TAPER MOUNT T-SLOT DRILLED & TAPPED FACE PLATE FOR HLV-H, ETC.

HARDINGE 8.75" TAPER MOUNT T-SLOT DRILLED & TAPPED FACE PLATE FOR HLV-H, ETC.

  • Harrison, New Jersey, United States
  • Jun 9th
MACHINIST TOOL LATHE MILL Machinist Lot of Set Up Hold Down Fixture s

MACHINIST TOOL LATHE MILL Machinist Lot of Set Up Hold Down Fixture s

  • Morris Plains, New Jersey, United States
  • Jun 9th
NICE HARDINGE C23 D FIXTURE NOSE 3"

NICE HARDINGE C23 D FIXTURE NOSE 3"

  • El Monte, California, United States
  • Jun 9th
MACHINIST TOOL LATHE MILL Phase II 5C Collet Closer Indexer

MACHINIST TOOL LATHE MILL Phase II 5C Collet Closer Indexer

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST LATHE MILL 4 1/2" 3 Jaw Lathe Chuck on Adjusatable Angle Plate Fisture

MACHINIST LATHE MILL 4 1/2" 3 Jaw Lathe Chuck on Adjusatable Angle Plate Fisture

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST LATHE MILL 9 3/4" Indexing Table Plate Fixture

MACHINIST LATHE MILL 9 3/4" Indexing Table Plate Fixture

  • Morris Plains, New Jersey, United States
  • Jun 9th
Starrett 191D Auxiliary Pointed Screw For Little Giant No. 191

Starrett 191D Auxiliary Pointed Screw For Little Giant No. 191

  • Brooklyn, New York, United States
  • Jun 9th
Suburban Tool, INC. URA-040508 8" X 4" X 5" - Machined Right Angle Tool

Suburban Tool, INC. URA-040508 8" X 4" X 5" - Machined Right Angle Tool

  • Fremont, California, United States
  • Jun 9th
Precision Milling Attachment with 2" Quick Release Vise for 6" to 12" Lathes New

Precision Milling Attachment with 2" Quick Release Vise for 6" to 12" Lathes New

  • Jacksonville, Florida, United States
  • Jun 9th
PRATT & WHITNEY 12" T SLOT ROTARY TABLE

PRATT & WHITNEY 12" T SLOT ROTARY TABLE

  • Ellington, New York, United States
  • Jun 9th
TROYKE R-12 12" T SLOT ROTARY TABLE

TROYKE R-12 12" T SLOT ROTARY TABLE

  • Ellington, New York, United States
  • Jun 9th
12" cast iron lath face plate for south bend ???

12" cast iron lath face plate for south bend ???

  • West Edmeston, New York, United States
  • Jun 9th
PRECISION Angle Plate URA-081012 MACHINED 8" x 10" x 12" 1-1/4" x 1"

PRECISION Angle Plate URA-081012 MACHINED 8" x 10" x 12" 1-1/4" x 1"

  • Oxnard, California, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Lathe Face Plate Fixtures 2 3/8" Cen

MACHINIST TOOLS LATHE MILL Machinist Lot of Lathe Face Plate Fixtures 2 3/8" Cen

  • Morris Plains, New Jersey, United States
  • Jun 9th
HARDINGE BROTHERS H4 HORIZONTAL 360 5C COLLET MILL INDEXING TOOL FIXTURE USED

HARDINGE BROTHERS H4 HORIZONTAL 360 5C COLLET MILL INDEXING TOOL FIXTURE USED

  • Deltona, Florida, United States
  • Jun 9th
5C INDEXING SPIN JIGS Fixture Drill Milling Lathe Grinding Collet

5C INDEXING SPIN JIGS Fixture Drill Milling Lathe Grinding Collet

  • Tujunga, California, United States
  • Jun 9th
INTERSTATE 6" x 6" x 8" Precision Ground Semi-Steel Right Angle Iron

INTERSTATE 6" x 6" x 8" Precision Ground Semi-Steel Right Angle Iron

  • Venice, Florida, United States
  • Jun 9th

People who viewed this item also vieved

MACHINIST TOOLS LATHE MILL 2 Large Unusual Brown & Sharpe V Blocks and Clamp

MACHINIST TOOLS LATHE MILL 2 Large Unusual Brown & Sharpe V Blocks and Clamp

  • Morris Plains, New Jersey, United States
  • Jan 30th
Machinist V Block and Clamp

Machinist V Block and Clamp

  • Fort Wayne, Indiana, United States
  • Jan 30th
2- TE-CO 40104 Step Blocks V.G.C.+

2- TE-CO 40104 Step Blocks V.G.C.+

  • Rome, New York, United States
  • Jan 30th
Royal MT#5 Versa Turn Live Center USA MADE

Royal MT#5 Versa Turn Live Center USA MADE

  • Columbus, Ohio, United States
  • Jan 30th
RITEN FULL DEAD CENTER, 79293, STEEL, CARBIDE TIPPED

RITEN FULL DEAD CENTER, 79293, STEEL, CARBIDE TIPPED

  • Coffeyville, Kansas, United States
  • Jan 30th
RITEN HALF DEAD CENTER, 79314, 14J, CARBIDE TIP, FAST-TRAK SPECIAL

RITEN HALF DEAD CENTER, 79314, 14J, CARBIDE TIP, FAST-TRAK SPECIAL

  • Coffeyville, Kansas, United States
  • Jan 30th
8" GATOR Lathe Chuck 3 Jaw TRU ADJUSTABLE + ADAPTER

8" GATOR Lathe Chuck 3 Jaw TRU ADJUSTABLE + ADAPTER

  • Columbus, Ohio, United States
  • Jan 30th
8" 3-Jaw D1-6 Cam-Lock Lathe Chucks

8" 3-Jaw D1-6 Cam-Lock Lathe Chucks

  • Columbus, Ohio, United States
  • Jan 30th
NEW Ball Bearing Chucks With Key Jacobs Taper #33

NEW Ball Bearing Chucks With Key Jacobs Taper #33

  • Columbus, Ohio, United States
  • Jan 30th
CARR LANE CL-1050-VTC vertical toggle clamp FREE SHIPPING

CARR LANE CL-1050-VTC vertical toggle clamp FREE SHIPPING

  • Twin Falls, Idaho, United States
  • Jan 30th
C Clamp, Vintage STEARNS 5" C Clamp with Butterfly Screw Knob, Made in USA

C Clamp, Vintage STEARNS 5" C Clamp with Butterfly Screw Knob, Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
C Clamp, (2) Vintage Cincinnati Tool Co. 4" C Clamp, Butterfly Handle Knobs, USA

C Clamp, (2) Vintage Cincinnati Tool Co. 4" C Clamp, Butterfly Handle Knobs, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
5C Collet Lathe Chuck Plain Back Includes Chuck Wrench

5C Collet Lathe Chuck Plain Back Includes Chuck Wrench

  • Carrollton, Ohio, United States
  • Jan 30th
HARDINGE #2 COLLET SPEED CHUCK 2J COLLET D1-6 LATHE MOUNT ***VGC***

HARDINGE #2 COLLET SPEED CHUCK 2J COLLET D1-6 LATHE MOUNT ***VGC***

  • Highland, New York, United States
  • Jan 30th
W&S 1-3/4" Lathe Chuck Collet Pads. Qty: 3 Pads (LS160-1)

W&S 1-3/4" Lathe Chuck Collet Pads. Qty: 3 Pads (LS160-1)

  • Miami, Florida, United States
  • Jan 30th
PAIR OF 5C EXPANDING MANDRELS EAGLE ROCK TYPE

PAIR OF 5C EXPANDING MANDRELS EAGLE ROCK TYPE

  • Ellington, New York, United States
  • Jan 30th
PAIR OF 5C EXPANDING MANDRELS EAGLE ROCK TYPE 1-1/2" x 1"

PAIR OF 5C EXPANDING MANDRELS EAGLE ROCK TYPE 1-1/2" x 1"

  • Ellington, New York, United States
  • Jan 30th
PAIR OF 5C PLUG MANDRELS

PAIR OF 5C PLUG MANDRELS

  • Ellington, New York, United States
  • Jan 30th
HALOGEN MACHINE LAMP 50 WATT

HALOGEN MACHINE LAMP 50 WATT

  • Chino, California, United States
  • Jan 30th
SK1 Taper Lock Hub 1 3/16" bore - NEW

SK1 Taper Lock Hub 1 3/16" bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Martin 50BS141 Sprocket - NEW

Martin 50BS141 Sprocket - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Accumulation Table, Feed Table, 42" diameter Turntable

Accumulation Table, Feed Table, 42" diameter Turntable

  • Asheboro, North Carolina, United States
  • Jan 30th
TROYKE 18” PRECISION HORIZONTAL ROTARY TABLE ~ MODEL R-18

TROYKE 18” PRECISION HORIZONTAL ROTARY TABLE ~ MODEL R-18

  • Baltimore, Maryland, United States
  • Jan 30th
L & W DIVIDING HEAD INDEX TABLE,CHART,COPY OF ORIGINAL

L & W DIVIDING HEAD INDEX TABLE,CHART,COPY OF ORIGINAL

  • Pinellas Park, Florida, United States
  • Jan 30th
SHOP FOX NAMEPLATE, 8" x 3-3/4" Beautiful Diecast Metal Name Plate New

SHOP FOX NAMEPLATE, 8" x 3-3/4" Beautiful Diecast Metal Name Plate New

  • Jacksonville, Florida, United States
  • Jan 30th
NICE!! YUASA 6" MILLING MILL MACHINE VISE - 6" MAX. CAPACITY #550-603

NICE!! YUASA 6" MILLING MILL MACHINE VISE - 6" MAX. CAPACITY #550-603

  • Chino, California, United States
  • Jan 30th
nice solid vintage wilton vise 3 " opening

nice solid vintage wilton vise 3 " opening

  • Urbana, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies