+ Post new Ad
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 0
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 1
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 2
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 3
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 0
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 1
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 2
STARRETT NO.567 V BLOCK AND CLAMP WITH BOX, US $75.00 – Picture 3

Starrett No.567 V Block And Clamp With Box

US $75.00

  • Rockwood, Maine, United States
  • Jan 30th
Open on mobile:
QR code
This Starrett No.567 v-block is in nice condition with little use, but does have two owners ID engravings and it's missing the side screw at the top.  The box is holding together, but the top has roughness and some tape at the rear.  The box label is 100%.  Priority shipping to the U.S. for 3 pounds will be $12.65 or less depending on the delivery location. 

Directions

Similar products from Supporting Blocks & Sets

1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

  • Saint Louis, Missouri, United States
  • Jan 30th
2 Tool Workholder Benchtop Vice Clips Vertical Hold Down Toggle Clamps DESTACO

2 Tool Workholder Benchtop Vice Clips Vertical Hold Down Toggle Clamps DESTACO

  • Buffalo, New York, United States
  • Jan 30th
SPI 1-2-3 Blocks

SPI 1-2-3 Blocks

  • Racine, Wisconsin, United States
  • Jan 30th
STARRETT NO. 129 BENCH BLOCK WITH BOX

STARRETT NO. 129 BENCH BLOCK WITH BOX

  • Petaluma, California, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Gages Parts Cutters Hold Downs Parts Etc

MACHINIST LATHE MILL Lot of Machinist Gages Parts Cutters Hold Downs Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Tap Wrench Scraper Collet Closer Parts Etc

MACHINIST LATHE MILL Lot of Machinist Tap Wrench Scraper Collet Closer Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
1-2-3 Precision Blocks

1-2-3 Precision Blocks

  • Fenton, Michigan, United States
  • Jan 30th
small ~ Magnetic V-Block -- small ~ V-Block

small ~ Magnetic V-Block -- small ~ V-Block

  • Aurora, Ohio, United States
  • Jan 30th
MACHINIST LATHE MILL Lot Machinist Stainless Hardware Bushings Collets Parts Etc

MACHINIST LATHE MILL Lot Machinist Stainless Hardware Bushings Collets Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
BROWN AND SHARPE NO. 750A V BLOCKS WITH CLAMPS MACHINIST TOOLING

BROWN AND SHARPE NO. 750A V BLOCKS WITH CLAMPS MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
Bridgeport wise jaw for angle milling,lot of grained parallels

Bridgeport wise jaw for angle milling,lot of grained parallels

  • Portsmouth, New Hampshire, United States
  • Jan 30th
PAIR I BEAM MACHINIST TOOLROOM MOLD MAKER PARALLELS

PAIR I BEAM MACHINIST TOOLROOM MOLD MAKER PARALLELS

  • Elmhurst, Illinois, United States
  • Jan 30th
PAIR I BEAM MACHINIST MOLD MAKER PARALLELS

PAIR I BEAM MACHINIST MOLD MAKER PARALLELS

  • Elmhurst, Illinois, United States
  • Jan 30th
Machinist V Blocks Clamp Set Of 3

Machinist V Blocks Clamp Set Of 3

  • Bridgewater, New Jersey, United States
  • Jan 30th
MACHINIST JIG FIXTURE ?? 6"D TOOL MAKER MILLING LATHE

MACHINIST JIG FIXTURE ?? 6"D TOOL MAKER MILLING LATHE

  • Macomb, Michigan, United States
  • Jan 30th
Machinist Right Angle Set Up Block TOOL MAKER MILLING LATHE

Machinist Right Angle Set Up Block TOOL MAKER MILLING LATHE

  • Macomb, Michigan, United States
  • Jan 30th
V Block, Machinist V Block with Clamp, 1-5/8" High X 1-3/4" Wide x 2-3/4" Long

V Block, Machinist V Block with Clamp, 1-5/8" High X 1-3/4" Wide x 2-3/4" Long

  • Saunderstown, Rhode Island, United States
  • Jan 30th
PARALLELS 1/8 thick steel MADE IN USA

PARALLELS 1/8 thick steel MADE IN USA

  • Mechanicsville, Maryland, United States
  • Jan 30th
Starrett V-Block No.567 with clamp

Starrett V-Block No.567 with clamp

  • Utica, Michigan, United States
  • Jan 30th
V-Block-CENTER IT is made of heavy aluminum extrusion. 5" Long

V-Block-CENTER IT is made of heavy aluminum extrusion. 5" Long

  • Orlando, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Lot Of 4) 2"- 3" Step Chuck Closer one extra deep Emergency chucker lathe

Lot Of 4) 2"- 3" Step Chuck Closer one extra deep Emergency chucker lathe

  • Middleburg, Pennsylvania, United States
  • Jun 20th
3" 5c Collet With HARDINGE Step Chuck Closer Emergency chucker lathe

3" 5c Collet With HARDINGE Step Chuck Closer Emergency chucker lathe

  • Middleburg, Pennsylvania, United States
  • Jun 20th
HARDINGE 6" 5c Collet (UNCUT) With Step Chuck Closer Emergency chucker

HARDINGE 6" 5c Collet (UNCUT) With Step Chuck Closer Emergency chucker

  • Middleburg, Pennsylvania, United States
  • Jun 20th
TTC 219-8442 41A16-3 MILLING MACHINE ARBOR

TTC 219-8442 41A16-3 MILLING MACHINE ARBOR

  • Duncan, South Carolina, United States
  • May 24th
Precision Milling Machine Arbors 30-40-50 Taper - Length: 15'

Precision Milling Machine Arbors 30-40-50 Taper - Length: 15'

  • Duncan, South Carolina, United States
  • May 24th
TTC 219-8444 41-1/4-A8 MILLING MACHINE ARBOR

TTC 219-8444 41-1/4-A8 MILLING MACHINE ARBOR

  • Duncan, South Carolina, United States
  • May 24th
GATOR 1-201-0800 3 Jaw Self-Centering Scroll Chuck-CHUCK SIZE: 8"

GATOR 1-201-0800 3 Jaw Self-Centering Scroll Chuck-CHUCK SIZE: 8"

  • Duncan, South Carolina, United States
  • May 25th
Abbott KTT8JN Jaw Nuts For 1.5mm x 60 Degrees Serrated Chucks - CHUCK SIZE: 8'

Abbott KTT8JN Jaw Nuts For 1.5mm x 60 Degrees Serrated Chucks - CHUCK SIZE: 8'

  • Duncan, South Carolina, United States
  • May 25th
GATOR 1-201-0500 3 Jaw Self-Centering Scroll Chuck-CHUCK SIZE: 5" Tool Materia

GATOR 1-201-0500 3 Jaw Self-Centering Scroll Chuck-CHUCK SIZE: 5" Tool Materia

  • Duncan, South Carolina, United States
  • May 25th
C- CLAMPS HEAVY DUTY 3 INCH 4 PCS !

C- CLAMPS HEAVY DUTY 3 INCH 4 PCS !

  • Northvale, New Jersey, United States
  • May 25th
( 5 pcs for 175.00 ) Destaco # 807-cyl Pneumatic Hold Down Clamp

( 5 pcs for 175.00 ) Destaco # 807-cyl Pneumatic Hold Down Clamp

  • National City, California, United States
  • May 25th
Wheel Spacer P/N 74800700 Appears Unused

Wheel Spacer P/N 74800700 Appears Unused

  • Hurricane, Utah, United States
  • May 25th
RECONDITIONED ERIE # 00-H PLUMBERS PIPE VISE FREE SHIPPING

RECONDITIONED ERIE # 00-H PLUMBERS PIPE VISE FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • May 26th
HHIP 3900-0017 3-1/2 Inch Angle Drill Press Vise

HHIP 3900-0017 3-1/2 Inch Angle Drill Press Vise

  • USA, United States
  • May 26th
NOS AMERICAN SUN 2-3/4" Micro Precision Milling Machine Vise M10D2 Aciera Deckel

NOS AMERICAN SUN 2-3/4" Micro Precision Milling Machine Vise M10D2 Aciera Deckel

  • Perth, Ontario, Canada
  • May 26th
riten 51606 live center

riten 51606 live center

  • Princeton, West Virginia, United States
  • May 27th
riten 51605 live center

riten 51605 live center

  • Princeton, West Virginia, United States
  • May 27th
riten 51905 live center

riten 51905 live center

  • Princeton, West Virginia, United States
  • May 27th
Destaco FL-161/60 Variable Stroke Plunger Clamp w/Front Flange Mount Body

Destaco FL-161/60 Variable Stroke Plunger Clamp w/Front Flange Mount Body

  • Middlebury, Indiana, United States
  • Jun 3rd
RENNSTEIG 1302 015 2 1 1/2 PIPE 16 3/4 CHR VANDIUM STL QUICK ADJ S-TYPE WRENCH

RENNSTEIG 1302 015 2 1 1/2 PIPE 16 3/4 CHR VANDIUM STL QUICK ADJ S-TYPE WRENCH

  • Vallejo, California, United States
  • Jun 3rd
RENNSTEIG 619 060 3 0.25-6.0MM CRIMP TOOLS WITH DIES WIRE

RENNSTEIG 619 060 3 0.25-6.0MM CRIMP TOOLS WITH DIES WIRE

  • Vallejo, California, United States
  • Jun 3rd
HAAS 4th AXIS 5C14 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C HA5C

HAAS 4th AXIS 5C14 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C HA5C

  • Santa Clarita, California, United States
  • Jun 7th
12.6" Matsumoto CNC 50 Taper Vertical Rotary Table, MDU-300L-HCS, W/ PDB, Used

12.6" Matsumoto CNC 50 Taper Vertical Rotary Table, MDU-300L-HCS, W/ PDB, Used

  • Grand Rapids, Michigan, United States
  • Jun 7th
Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, off Matsuura VMC

Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, off Matsuura VMC

  • Grand Rapids, Michigan, United States
  • Jun 7th
Clarkson Autolock collet chuck NMTB40 In metal case

Clarkson Autolock collet chuck NMTB40 In metal case

  • Quebec, Quebec, Canada
  • Jun 10th
Permapaque Paint Markers Dual Point 4/Pkg-Purple, Pink, Orange & Sky Blue

Permapaque Paint Markers Dual Point 4/Pkg-Purple, Pink, Orange & Sky Blue

  • Hickory Hills, Illinois, United States
  • Jun 10th
Dover Publications-Easy Dollar Bill Origami

Dover Publications-Easy Dollar Bill Origami

  • Hickory Hills, Illinois, United States
  • Jun 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies