Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 0

Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 1

Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 2

Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 3

Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 4

Super Pass2 By Grace Industries Firefighter Pass Device, US $844 – Picture 5

Super Pass2 By Grace Industries Firefighter Pass Device

US $844

Brick, New Jersey, United States
Jan 29th

Open on mobile:
QR code

The Super PASS II is the first of the 'Auto On' series of Personal Alert Safety Systems (PASS) from Grace Industries, Inc. 1) Dual Function PASS Alarm... Motion and Heat Sensing (Auto-On includes 1 accountability key Battery not included The Super PASS II is the first of the 'Auto On' series of Personal Alert Safety Systems (PASS) from Grace Industries, Inc. The 'Auto On' feature provides the next level of assurance that PASS are not only being worn, but are turned on 'Automatically' when removed from the "Storage" position. When removed from the "Storage" position, the Super PASS II Accountability Storage Key will automatically pop off putting the unit into the "Sensing Mode" (or ON). When Super PASS II turns ON, a unique series of loud audio tones will be heard. These audio tones indicate initial battery status and are followed by the visual wig-wag display of yellow L.E.D.s. When there is a lack of motion for approximately 18 to 23 seconds the unit will go into the "Pre-Alarm" mode and annunciate an audible "Pre-Alert" signal. In "Pre-Alarm", the yellow wig-wag display is replaced by the intermittent pulsing of four red LEDs accompanied by a sweeping "Pre-Alarm" audio signal which becomes progressively louder. The longer the unit is in "Pre-Alarm", the louder the sweeping "Pre-Alarm" signal becomes, signifying the PASS is closer to the full "Alarm" mode. After a lack of motion lasting approximately 30 to 35 seconds, the unit will go into "Alarm" mode. When in "Alarm" the "Pre-Alarm" display is replaced by the constant rapid pulsing of four red LEDs, which is accompanied by a loud audio "Alarm" signal that rapidly varies in pitch. This feature is invaluable for recognizing downed firefighters. Once in "Alarm", the unit can be reset by pressing both side buttons simultaneously. When in "Sensing" mode, the Super PASS II may be put into the "Alarm" mode at any time by manually pressing the "Alarm" button located on the front surface of the unit. To turn the Super PASS II Off, simply replace the Accountability Storage Key, thereby returning the unit to the "Storage" position and press both buttons simultaneously. The Accountability Storage Key is a value added benefit of Grace Industries' Super PASS II. The clear Identification Window provides the opportunity to specifically identify the user through the ability to personalize the keys with photos, names, numbers, department ID, bar-codes, etc. The clear access window easily snaps into place to protect the enclosed information and provide instant access for rapid identification. Replacement keys are available. Still have questions? Click here! Super PASS II Dual Function (Motion & Heat) comes with temperature sensing capability. Approximate response times for temperate alarm.* Environment Temperature Alarm Response Time 350° F 6 Minutes 300° F 8 Minutes 250° F 10 Minutes 200° F 12 Minutes *Response times listed are approximate due to the variance of environmental factors and the thermal inertia of the heat sensing system. Specifications Dimensions: 2.1" wide by 3.2" high by 1.6" deep Weight: 7oz w/battery (without key) Alarm Audio Output: 98+ dBA minimum measured at 10 feet Motion Detector: Solid State Accelerometer Case: Rugged, high temperature, impact resistant and translucent polycarbonate plastic Sound Discern Ability: 6 dBA against given background noise Battery: 9 volt alkaline battery (Duracell MN 1604 recommended) Certifications: Intrinsically safe for use in Class 1, Division 1, Groups A, B, C & D hazardous locations (UL 913)

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“New without original packaging. Has number engraved on one side”