TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 0

TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 1

TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 2

TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 3

TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 4

TEKNEK SMCM2 PCB Bare Board Cleaner, US $1,000.00 – Picture 5

Teknek Smcm2 Pcb Bare Board Cleaner

US $1,000.00

McHenry, Illinois, United States
Jan 30th

Open on mobile:
QR code

Eliminate soldering problems with the Teknek Surface Mount Clean Machine, the SMCM2. Removing contamination from the surface of a board prior to solder paste printing or adhesive placement improves production process as well as increasing your yield and profits. Contamination on bare boards causes problems in three areas: • Solder Faults - opens / shorts etc • Process - affecting the SMT line as a whole • Product Reliability - cost and reputation The SMCM2 cleans the bare board before solder paste printing and adhesive application in any automatic in-line process using proven transfer cleaning system. The specially formulated elastomer roller runs in contact with the surface of the board. The dust particles are transferred from the board by the roller to the Teknek engineered adhesive roll. The adhesive roll can then be purged removing dust particles from the process forever. Dust particles which contaminate your solder paste, are proven to cause solder defects. Another major benefit of cleaning is to increase your product reliability. Test results have shown that dust remaining within a reflow solder joint can cause open circuits later in use affecting your product reliability. The SMCM2 will directly improve your profit. CE Marked Stainless Steel Outer Shell Additional cost of $25 to skid, wrap and band to be paid separately. see below Over ten years of selling experience on eBay has taught us that clearly stated policies and a clearly defined set of expectations between the buyer and seller lends to a higher degree of customer satisfaction and an overall better buying experience. Please take the time to review these policies. Item Condition Capital Equipment Exchange receives the majority of our items by way of industrial asset recovery programs. Our capabilities to test equipment are limited. All items are sold “as is” unless explicitly stated otherwise in the description of the listing. When viewing our listings, please assume that the item has not been functioned tested by a qualified technician unless otherwise clearly stated in the description. Items do not come with power cables unless stated in the description. Items do not come with any documentation or additional hardware or software except for what is depicted in the image or explicitly stated in the description. The item depicted in listing photographs is the item available for purchase unless specifically stated in the auction. We do not use stock photos. In the case of a listings for multiple quantities, we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. Capital Equipment Exchange will often use product websites as a way to provide additional information to our item descriptions. We use manufacturer’s websites and 3rd party websites. We consider the manufacturer’s website information to be accurate insofar that the information given matches exactly the model number of the item being listed. We use 3rd party websites primarily as a means of market price comparison. Capital Equipment Exchange is not responsible for inaccuracies from manufacturer’s websites or 3rd party websites. Do your own research. The description of any item is accurate to the best of our knowledge. We appreciate any feedback you can give us about any listing that will provide more specific information about the product or correct inaccuracies that may appear in our listings. The majority of the items we receive have been pulled from a working environment. However, because most of our items are untested and uncertified we opt to start prices below wholesale value. Please take this in consideration when bidding or purchasing. Please make sure that we have answered all your questions about an item before bidding or purchasing. Payment Information By placing a bid, selecting to “buy it now” or making an offer, you indicate that you have reviewed and find acceptable all store policies and terms established by Capital Equipment Exchange. We consider all sales to be final. All payments are to be made in US dollars and terms are FOB Ex Works. PayPal is the preferred method of payment. Through PayPal you may pay with Visa, MasterCard, American Express, Discover Card. Payment must be made no later than 3 business days after an invoice is issued. If the items requires pallet, skid or crate, the payment for this service will also need to be paid prior to shipment (See shipping info below). Capital Equipment Exchange reserves the right to consider the offer of the next highest bidder in the case of auctions where payments are not received with 3 business days. Capital Equipment Exchange reserves the right to consider relisting an item in the case of fixed price listings where payments are not received with 3 business days. In accordance with eBay payment policies, an “Unpaid Item Dispute” will be filed for all unpaid items after 7 business days. Shipping Information The item that you are bidding on requires that it be shipped on/in pallet, skid or crate. We can quote this to you upon purchase or estimate prior (to bidding.) Payment for this service will be separate and will need to be paid prior to shipment. As a service to the buyer, Capital Equipment Exchange will load your paid item onto your preferred/selected carrier at no additional cost. All sales are made f.o.b. our plant, McHenry, IL. Title to the goods, unless otherwise provided, passes to purchaser upon delivery of the merchandise to the carrier. Capital Equipment Exchange (CEE) responsibility ceases upon issuance of a bill of lading or delivery to carrier. CEE has no responsibility for goods in transit. Unless otherwise agreed in writing by PFE, all freight charges, insurance and handling charges from CEE’s plant, McHenry, IL will be on a “collect” basis and purchaser agrees to pay same to carrier upon presentation. Please e-mail us your phone number for the freight company in case they need to contact you. We will provide freight quotes upon request. Please remember that all freight quotes are estimates. We cannot know the actual charge for shipment until the item is fully prepared (crated) for shipment. The item is not currently crated and size and weight estimates will have been approximated. Any additional charges before or after shipment by the trucking company are the buyers responsibility. Freight shipments will ship COD (for freight charges only) to the buyer's location. Buyer is responsible for paying freight shipping charges at the time of delivery. We will assist as much as possible in arranging shipping within the USA and Canada only. PLEASE NOTE: For destinations in all other countries please contact us before purchasing to let us know how you intend to ship your item. Buyer must contact us to arrange shipping or pickup after purchase price & crating/handling charges have been paid. NOTE: Purchase price, crating & packaging (if applicable) must be paid in full before item will ship. Store Information Our Business Hours are Monday - Friday, 8:00am to 4:30pm CST. International Buyers are welcome to purchase our products, however any warranty given in the auction is not applicable to an international sale. Feedback We appreciate your business and we also appreciate your feedback. Please take the time to provide feedback about your buying experience with Capital Equipment Exchange and we will do the same for you. Customer satisfaction is our highest priority! If you have had any problems during your buying experience we would like to know about it and we want the opportunity to make things right. Adverse feedback can be extremely detrimental to an eBay business so please contact us before making your final decision to leave negative or neutral feedback. We make every effort to respond to concerns within one business day. If you haven’t heard back from us within two business days you may want to check your spam mail folder. Contact IF YOU HAVE ANY QUESTIONS PLEASE CALL 815-363-0800 OR e-mail US to ebay@ce-exchange.com. Don't forget to add us to your favorite store list and please sign up for our monthly news letter.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“The unit is is fine condition. One small dent on side panel.”