+ Post new Ad
TEN Carbide Router Bits Diamond Cut Router PCB 1.60 mm / 1/16" diameter, US $9.95 – Picture 0
TEN Carbide Router Bits Diamond Cut Router PCB 1.60 mm / 1/16" diameter, US $9.95 – Picture 0

Ten Carbide Router Bits Diamond Cut Router Pcb 1.60 Mm / 1/16" Diameter

US $9.95

  • Mountain View, California, United States
  • Jan 30th
Open on mobile:
QR code
When taking advantage of the 1/2 off second set, buy one set at full price and then make an offer for one set at $4.50 within an hour and I'll accept that offer. That is just $14.50 + shipping for 20 solid carbide Diamond Cut router bits.  Excellent free hand routing in wood with a Dremel or miniature router. These are lightly used, precision miniature Diamond Cut router bits. The application and expense of the work piece that these are used for (mil spec printed circuit boards) require tool changes well before these tools are dull or chipped. Extremely sharp so be careful, don't worry though they are tough, made from a single piece of solid, Tungsten Carbide.     You'll receive 10 of these Used 1.60mm (.063") diameter, Diamond Cut flute router bits, solid carbide tools made in the USA by US Union Tool.   Flute Diameter - 1.60mm (.063") Shaft Diameter - 1/8" Flute Length - .400" Flute - Chip breaker Point - Fish Tail Every buyer gets a MyStoreRewards invitation for cash back
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Lightly used to profile Route High End PWB, PCB.”

Directions

Similar products from Router Bits & Sets

Ryobi TR30U Laminate Trim Router

Ryobi TR30U Laminate Trim Router

  • Camillus, New York, United States
  • Jan 30th
Freud Molding Router Bit 99-PK1 Shank 1/2"; 2 3/16" Diam Carbide Height 1 15/16"

Freud Molding Router Bit 99-PK1 Shank 1/2"; 2 3/16" Diam Carbide Height 1 15/16"

  • Macomb, Michigan, United States
  • Jan 30th
Amana Tool 53820 DOOR EDGE DETAIL ROUTER BIT CABINET 1/2 SHANK NEW

Amana Tool 53820 DOOR EDGE DETAIL ROUTER BIT CABINET 1/2 SHANK NEW

  • United States
  • Jan 30th
1pcs CNC router cleaning bottom wood working bits 1/2" 2"

1pcs CNC router cleaning bottom wood working bits 1/2" 2"

  • CN, China
  • Jan 30th
*Amazing Eliminator RC Chuck for Bosch Routers*

*Amazing Eliminator RC Chuck for Bosch Routers*

  • Springfield, Virginia, United States
  • Jan 30th
Amana Tool 49730 VARIABLE CHAMFER ROUTER BIT ASSEMBLY 30 45 DEGREE NEW

Amana Tool 49730 VARIABLE CHAMFER ROUTER BIT ASSEMBLY 30 45 DEGREE NEW

  • United States
  • Jan 30th
1/8" BEADING ROUTER BIT, 1/2" SHANK, CARBIDE TIP, TCT, CORNER ROUND OVER W/ BEAD

1/8" BEADING ROUTER BIT, 1/2" SHANK, CARBIDE TIP, TCT, CORNER ROUND OVER W/ BEAD

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
FS Tool 1/2" Solid Carbide Spiral Router Bit.

FS Tool 1/2" Solid Carbide Spiral Router Bit.

  • Muncy, Pennsylvania, United States
  • Jan 30th
Edge Rounding Shaper Cutter 5" Dia, 1" Bore, Beading / Roundover, Used cond.

Edge Rounding Shaper Cutter 5" Dia, 1" Bore, Beading / Roundover, Used cond.

  • Castaic, California, United States
  • Jan 30th
Porter Cable No. 42690

Porter Cable No. 42690

  • Delano, California, United States
  • Jan 30th
35 Piece Tungsten Carbide Blade Woodworking Router Bits

35 Piece Tungsten Carbide Blade Woodworking Router Bits

  • Epsom, New Hampshire, United States
  • Jan 30th
Amana Tool A-30-116 Carbide tipped corner round shaper cutter 4-1/2" Diameter

Amana Tool A-30-116 Carbide tipped corner round shaper cutter 4-1/2" Diameter

  • Overland Park, Kansas, United States
  • Jan 30th
Amana Tool SC542 Ogee Stile & Rail Shaper Cutters Carbide Tipped NEW

Amana Tool SC542 Ogee Stile & Rail Shaper Cutters Carbide Tipped NEW

  • Overland Park, Kansas, United States
  • Jan 30th
Amana Tool 54170 Corner Beading Router Bit, 1/4" Radius, 1/2" Shank, Brand New!!

Amana Tool 54170 Corner Beading Router Bit, 1/4" Radius, 1/2" Shank, Brand New!!

  • Parsippany, New Jersey, United States
  • Jan 30th
Amana Tool 54127 Classical Ogee 2-Flute Carbide Tipped Router Bit 1/2-Inch Shank

Amana Tool 54127 Classical Ogee 2-Flute Carbide Tipped Router Bit 1/2-Inch Shank

  • Parsippany, New Jersey, United States
  • Jan 30th
Amana Tool 49122 Cove Bit 1" Radius, 1/2" Shank Router Bit, Used Only Once!!

Amana Tool 49122 Cove Bit 1" Radius, 1/2" Shank Router Bit, Used Only Once!!

  • Parsippany, New Jersey, United States
  • Jan 30th
Vermont American LOT OF 5 ROUTER BITS NEW

Vermont American LOT OF 5 ROUTER BITS NEW

  • Kearney, Missouri, United States
  • Jan 30th
1/8” Corner Round Diamond Router Bit–Grit 50/60 - Wood Use Only (#204)

1/8” Corner Round Diamond Router Bit–Grit 50/60 - Wood Use Only (#204)

  • Maple Lake, Minnesota, United States
  • Jan 30th
20mm Full Bullnose Diamond Router Bit–Grit 30/40 - Wood Use Only (#149)

20mm Full Bullnose Diamond Router Bit–Grit 30/40 - Wood Use Only (#149)

  • Maple Lake, Minnesota, United States
  • Jan 30th
1/4” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#92)

1/4” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#92)

  • Maple Lake, Minnesota, United States
  • Jan 30th

People who viewed this item also vieved

1971 Unimat/Edelstaal Miniature Maching Techniques Handbook

1971 Unimat/Edelstaal Miniature Maching Techniques Handbook

  • Spring City, Pennsylvania, United States
  • Jun 1st
FOLEY OPERATING & SERVICE INSTRUCTIONS FOR PWER SETTERS

FOLEY OPERATING & SERVICE INSTRUCTIONS FOR PWER SETTERS

  • Gosport, Indiana, United States
  • Jun 1st
powermatic model 90 wood lathe

powermatic model 90 wood lathe

  • Milton, West Virginia, United States
  • Jun 2nd
New 6 in. Heavy Duty Bench Vise with Swivel Base Fastening Clamps Hand Tool

New 6 in. Heavy Duty Bench Vise with Swivel Base Fastening Clamps Hand Tool

  • Little River, South Carolina, United States
  • May 28th
IRWIN 3 INCH 75MM QUICK GRIP SPRING LOADED HOLDING CLAMP BRAND NEW

IRWIN 3 INCH 75MM QUICK GRIP SPRING LOADED HOLDING CLAMP BRAND NEW

  • Greenwood, WA, Australia
  • May 28th
De-Sta-Co 235-U Horizontal Toggle Clamp 750lb Holding Capacity

De-Sta-Co 235-U Horizontal Toggle Clamp 750lb Holding Capacity

  • Middlebury, Indiana, United States
  • May 28th
2 pcs. buckled raw myrtlewood burl wood veneer 25.5" x 10" guitar Luthier 1/42"

2 pcs. buckled raw myrtlewood burl wood veneer 25.5" x 10" guitar Luthier 1/42"

  • Scarsdale, New York, United States
  • Jun 2nd
East Indian rosewood wood veneer 8 buckled pieces 4 1/2" x 4 5/8" 1/42" thick

East Indian rosewood wood veneer 8 buckled pieces 4 1/2" x 4 5/8" 1/42" thick

  • Scarsdale, New York, United States
  • Jun 2nd
Wood Cherry Veneer 114x9,11,13,15, total 3 pcs RAW VENEER 1008..

Wood Cherry Veneer 114x9,11,13,15, total 3 pcs RAW VENEER 1008..

  • Clarksville, Indiana, United States
  • Jun 2nd
Bosch T345XF100 5-1/4", "Progressor" Bi-Metal Bosch Shank Jigsaw Blade, 100 Pack

Bosch T345XF100 5-1/4", "Progressor" Bi-Metal Bosch Shank Jigsaw Blade, 100 Pack

  • USA, United States
  • Jun 3rd
Bosch T118GFS 3-1/4-Inch 36TPI BIM T-Shank JSB, 5-Pack

Bosch T118GFS 3-1/4-Inch 36TPI BIM T-Shank JSB, 5-Pack

  • USA, United States
  • Jun 3rd
Forrest NM106011125 No Melt 10-Inch 60 Tooth 5/8-Inch Arbor 1/8-Inch Kerf

Forrest NM106011125 No Melt 10-Inch 60 Tooth 5/8-Inch Arbor 1/8-Inch Kerf

  • USA, United States
  • Jun 3rd
10% discount 14RS2 Set of 2 - 1 each Green and Yellow 2 inch x 1/4 inch

10% discount 14RS2 Set of 2 - 1 each Green and Yellow 2 inch x 1/4 inch

  • Iron River, Michigan, United States
  • Jun 5th
14RS2G Green 2 inch x 1/4 inch Coarse

14RS2G Green 2 inch x 1/4 inch Coarse

  • Iron River, Michigan, United States
  • Jun 5th
14RS2Y Yellow 2 inch x 1/4 inch Fine

14RS2Y Yellow 2 inch x 1/4 inch Fine

  • Iron River, Michigan, United States
  • Jun 5th
GRIZZLY RAISED PANEL SHAPER CUTTER with undercutter & rub bearing

GRIZZLY RAISED PANEL SHAPER CUTTER with undercutter & rub bearing

  • Marshall, Texas, United States
  • Jun 9th
5 5/8" Large Rosewood Handle with Brass Shop Fox #D2921

5 5/8" Large Rosewood Handle with Brass Shop Fox #D2921

  • Troy, Virginia, United States
  • Jun 9th
Vintage Woodworking Linear Counter Durant Productimeter Wheel Measurement

Vintage Woodworking Linear Counter Durant Productimeter Wheel Measurement

  • Tonawanda, New York, United States
  • Jun 9th
IRWIN INDUSTRIAL TOOL CO - 5/32" Titan Drill Bit

IRWIN INDUSTRIAL TOOL CO - 5/32" Titan Drill Bit

  • Brooklyn, New York, United States
  • Jun 12th
T&O MCS2TIN 3 Piece Step Drill Sets

T&O MCS2TIN 3 Piece Step Drill Sets

  • Duncan, South Carolina, United States
  • Jun 12th
T&O MCS2 3 Piece Step Drill Sets

T&O MCS2 3 Piece Step Drill Sets

  • Duncan, South Carolina, United States
  • Jun 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies