Thermal Non-invasive Low-flow Flowmeters, 0 To 80 Ml/min Brand New!!!!!

US $1,400.00

Newport, Vermont, United States
Jan 29th

Open on mobile:
QR code

Brand New in the original Box - never been out of the box. These sell for 1500.00 on Cole-Parmer. SAVE, SAVE, SAVE Flowmeters > Thermal Noninvasive Low-Flow Flowmeters | Thermal Non-Invasive Low-Flow Flowmeters, 0 to 80 mL/min Mfr# SLQ-HC60 | Item# EW-32611-10 § Nano-and micro-flow measurements for precision laboratory applications § Resolutions down to 500 pL/min § Response time < 50 ms These liquid mass flowmeters enable extremely fast and accurate measurements of ultra-low liquid mass flows, and operate with total media isolation, very little dead volume, and no moving parts. The flowmeter detects liquid mass flow by measuring heat transfer through the tubing material of a glass capillary. On a microchip outside the capillary, a heating resistor on a thermally optimized membrane is kept above ambient temperature. In the presence of liquid flow inside the capillary, the temperature distribution upstream and downstream is disturbed—this difference is then measured. CMOSens® sensor technology combines a high-precision thermal sensor element with digital signal processing on one single CMOS chip. In addition, the digital intelligence of the CMOSens sensor technology enables digital interfaces that permit an easy link with PCs, PLC, and other controllers. All measurement data is fully calibrated and temperature compensated by means of an internal microcontroller. Excellent chemical resistance and bio-compatibility are ensured, and the process medium only gets in contact with the straight sensor capillary. Typical applications for this sensor include precise liquid mass flow and volume measurement for analytical instruments, and process control. Models 32611-00 to -08 are calibrated for water only. Superior repeatability of the measurement signal is still maintained for other media and thus allows after-measurement-correction on a computer or microcontroller. Model 32611-10 is calibrated for IPA only but can also be used for repeatable measurements of other hydrocarbons such as ethanol, acetone, diesel, petroleum, ether, and most other media; however it does not work with aqueous solutions. What's Included: Models 32611-00 to -04: PC software, 2 µm in-line filters, OD360 PEEK® capillaries, RS-232 data cable, AC adapter for 110 to 230 VDC. Models 32611-06 and -08: PC software, UNF 10-32 fitting, RS-232 data cable, AC adapter for 110 to 230 VDC. Model 32611-10: pigtail cable, fittings for 1/8’’ OD plastic tubing, and barb and luer connectors. Specifications Description Mass Flowmeter Max operating temperature (? F) 113 Max operating temperature (? C) 45 Accuracy 10% of measured value (log signal curve) Operating temperature 50 to 104°F (10 to 40°C) Electrical connections 8-pin M8 Brand Sensirion Power 16 to 26 VDC Product Type Mass Flow Flowmeters Manufacturer number SLQ-HC60

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Sensirion
MPN	S:Q-HC60
Model	0 to 80 mL/min