+ Post new Ad
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 0
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 1
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 2
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 3
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 4
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 5
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 6
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 0
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 1
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 2
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 3
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 4
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 5
THIRTY-FIVE PIECE PRECISION ANGLE SET, US $75.00 – Picture 6

Thirty-five Piece Precision Angle Set

US $75.00

  • Burlington, New Jersey, United States
  • Jan 30th
Open on mobile:
QR code
TOOLMAKER MADE, hardened and precision ground. 35 PIECE PRECISION ANGLE SET IN HARD LUCITE CASE. EACH PIECE IS APPROXIMATELY .093 THICK BY 3.437 LONG. HEIGHTS VARY FROM APPROXIMATELY ONE INCH TO HALF INCH.  EACH PIECE HAS A BLACK OXIDE COATING. PREVIOUS OWNERS INITIALS AND ANGLE IN DEGREES AND MINUTES ARE ENGRAVED ON EACH PIECE. INCREMENTS ARE AS FOLLOWS: TEN PIECES, 1 TO 10 MINUTES / NINE PIECES: 15,20,25,30,35,40,45,50, AND 55 MINUTES. TEN PIECES: 1 TO 10 DEGREES. SIX PIECES, 15,20,25,30,35 AND 40 DEGREES. SOME HAVE NEVER BEEN USED AND OTHERS SHOW WEAR TO BLACK OXIDE FINISH THAT DOES NOT EFFECT THEIR ACCURACY. SOME OF THE PHOTOS MAKE THE PARTS APPEAR RUSTY. THEY ARE NOT. THIS IS A ONE OF A KIND SET AND IS PERFECT FOR A BRIDGEPORT OR GRINDING SET UP. THEIR SIZE ALLOWS YOU TO FIT THEM UNDER STOCK IN A SMALL VISE OR ANGLE PLATE. MULTIPLE PIECES CAN BE USED TO SET ANY ANGLE. SHIPPING TO U.S. ONLY. PAYMENT BY PAYPAL ONLY. On Nov-07-14 at 06:02:43 PST, seller added the following information:Hardened and precision ground.

Directions

Similar products from Supporting Blocks & Sets

2.250"x2.625"x3.250" V Block Toolmakers Dream

2.250"x2.625"x3.250" V Block Toolmakers Dream

  • Bronson, Florida, United States
  • Jan 30th
25 Piece Machinist Raduis Gages with case. Made by Mitutoyo.

25 Piece Machinist Raduis Gages with case. Made by Mitutoyo.

  • San Antonio, Texas, United States
  • Jan 30th
STARRETT V-BLOCK No.568 & CLAMP, MACHINIST TOOLS CLEAN VGC

STARRETT V-BLOCK No.568 & CLAMP, MACHINIST TOOLS CLEAN VGC

  • Malden, Massachusetts, United States
  • Jan 30th
Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holding angle block

Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holding angle block

  • Reynoldsburg, Ohio, United States
  • Jan 30th
2 SMALL MEASURING BLOCKS, 2 SMALL ANGLE BLOCKS AND 2 SMALL SCRIBES

2 SMALL MEASURING BLOCKS, 2 SMALL ANGLE BLOCKS AND 2 SMALL SCRIBES

  • Epping, New Hampshire, United States
  • Jan 30th
90 Degree Steel Angle Block Calibrated

90 Degree Steel Angle Block Calibrated

  • Tubac, Arizona, United States
  • Jan 30th
MACHINIST TOOLMAKERS BLOCKS

MACHINIST TOOLMAKERS BLOCKS

  • United States
  • Jan 30th
Brown & Sharpe No. 750A V - Blocks MATCHED SET (66)

Brown & Sharpe No. 750A V - Blocks MATCHED SET (66)

  • Hopatcong, New Jersey, United States
  • Jan 30th
2 Taft Peirce V-blocks 2 clamps and 2 screws Auction B

2 Taft Peirce V-blocks 2 clamps and 2 screws Auction B

  • Granger, Indiana, United States
  • Jan 30th
4-1 2 3 Blocks 4 -25 m.m. x 50m.m. x100 m.m. Precision Set Up Blocks

4-1 2 3 Blocks 4 -25 m.m. x 50m.m. x100 m.m. Precision Set Up Blocks

  • Granger, Indiana, United States
  • Jan 30th
Brown & Sharpe No. 415 v block machinist tool

Brown & Sharpe No. 415 v block machinist tool

  • Towanda, Pennsylvania, United States
  • Jan 30th
Matched pair of Used Machinist V-Blocks with clamp. 1.5"x 1.5" x 2"

Matched pair of Used Machinist V-Blocks with clamp. 1.5"x 1.5" x 2"

  • Angola, New York, United States
  • Jan 30th
Brown & Sharpe 1-1/2in. V-Blocks No. 749

Brown & Sharpe 1-1/2in. V-Blocks No. 749

  • Old Hickory, Tennessee, United States
  • Jan 30th
MAGNETIC-grinding-EDM-BLOCKS .969 thick aluminum 3.5 diameter .187 steel pins

MAGNETIC-grinding-EDM-BLOCKS .969 thick aluminum 3.5 diameter .187 steel pins

  • Columbia, Kentucky, United States
  • Jan 30th
MAGNETIC-grinding-EDM-BLOCKS .943-thick-aluninum-with .187 steel pins

MAGNETIC-grinding-EDM-BLOCKS .943-thick-aluninum-with .187 steel pins

  • Columbia, Kentucky, United States
  • Jan 30th
MAGNETIC-grinding-EDM-BLOCKS .946-thick aluminum with .187 steel pins

MAGNETIC-grinding-EDM-BLOCKS .946-thick aluminum with .187 steel pins

  • Columbia, Kentucky, United States
  • Jan 30th
MAGNETIC grinding/EDM BLOCKS .960 thick brass with .250 and .125 steel pins

MAGNETIC grinding/EDM BLOCKS .960 thick brass with .250 and .125 steel pins

  • Columbia, Kentucky, United States
  • Jan 30th
Brown & Sharpe No. 750A V Set up Blocks ,MATCHED SET

Brown & Sharpe No. 750A V Set up Blocks ,MATCHED SET

  • United States
  • Jan 30th
Starrett No.278 V- Block & Clamp 1"Dia Capacity Hardened & Ground, Machinist

Starrett No.278 V- Block & Clamp 1"Dia Capacity Hardened & Ground, Machinist

  • United States
  • Jan 30th
Starrett 568A V-Block and Clamp

Starrett 568A V-Block and Clamp

  • Kennesaw, Georgia, United States
  • Jan 30th

People who viewed this item also vieved

RITEN 34164 4MT STANDARD POINT HEAVY DUTY LIVE CENTER

RITEN 34164 4MT STANDARD POINT HEAVY DUTY LIVE CENTER

  • Duncan, South Carolina, United States
  • Jun 6th
3MT LONG POINT ADVANTAGE LIVE CENTER

3MT LONG POINT ADVANTAGE LIVE CENTER

  • Duncan, South Carolina, United States
  • Jun 6th
RITEN 51102 2MT LONG POINT ADVANTAGE LIVE CENTER

RITEN 51102 2MT LONG POINT ADVANTAGE LIVE CENTER

  • Duncan, South Carolina, United States
  • Jun 6th
PBA 1505012 3 Jaw Chuck Mounting Plate, Chuck Size:15'

PBA 1505012 3 Jaw Chuck Mounting Plate, Chuck Size:15'

  • Duncan, South Carolina, United States
  • Jun 6th
PBA 1505023 3 Jaw Chuck Mounting Plate, Chuck Size:15'

PBA 1505023 3 Jaw Chuck Mounting Plate, Chuck Size:15'

  • Duncan, South Carolina, United States
  • Jun 6th
PBA 1205032 3 Jaw Chuck Mounting Plate, Chuck Size:12'

PBA 1205032 3 Jaw Chuck Mounting Plate, Chuck Size:12'

  • Duncan, South Carolina, United States
  • Jun 6th
5C COLLET NYLON

5C COLLET NYLON

  • Gardena, California, United States
  • Jun 9th
HARDINGE 5C EMERGENCY COLLET 5C-EN2-2

HARDINGE 5C EMERGENCY COLLET 5C-EN2-2

  • Gardena, California, United States
  • Jun 9th
HARDINGE 5C-E0 EMERGENCY COLLET

HARDINGE 5C-E0 EMERGENCY COLLET

  • Gardena, California, United States
  • Jun 9th
Steel C Clamps (18 Pc.)

Steel C Clamps (18 Pc.)

  • Philadelphia, Pennsylvania, United States
  • Jun 9th
Aircraft Sheetemetal Cleco Clamps

Aircraft Sheetemetal Cleco Clamps

  • Kansas City, Missouri, United States
  • Jun 9th
Kant Twist Clamps 4 USED USA T-Handle Machinists Clamps Model 2)420 6" 2)410 3"

Kant Twist Clamps 4 USED USA T-Handle Machinists Clamps Model 2)420 6" 2)410 3"

  • Petaluma, California, United States
  • Jun 9th
T-28 Wilton Bullet Vise

T-28 Wilton Bullet Vise

  • Longwood, Florida, United States
  • Jun 9th
Mill Vise - American Positive Grip Vise

Mill Vise - American Positive Grip Vise

  • Ottawa, Ohio, United States
  • Jun 9th
ERON 2-1/2" ADJUSTABLE ANGLE DRILL PRESS VICE

ERON 2-1/2" ADJUSTABLE ANGLE DRILL PRESS VICE

  • Ellington, New York, United States
  • Jun 9th
8960 CUSTOM MADE 3 JAW HEATED CHUCK W/ 3 THERMOCOUPLES

8960 CUSTOM MADE 3 JAW HEATED CHUCK W/ 3 THERMOCOUPLES

  • Minneapolis, Minnesota, United States
  • Jun 9th
JACOBS CHUCK NO34 CAP 0-1/2 WITH TOOL HOLDER #790

JACOBS CHUCK NO34 CAP 0-1/2 WITH TOOL HOLDER #790

  • Chicago, Illinois, United States
  • Jun 9th
Interstate 8" SET-TRU Adjustable Lathe Chuck 3-Jaw Self Centering 08600306

Interstate 8" SET-TRU Adjustable Lathe Chuck 3-Jaw Self Centering 08600306

  • Venice, Florida, United States
  • Jun 9th
ER 20 5.5" Collet Extension 0.75" Shank ST3 4x4 00 ER20 ME (LOC2670A)

ER 20 5.5" Collet Extension 0.75" Shank ST3 4x4 00 ER20 ME (LOC2670A)

  • Laingsburg, Michigan, United States
  • Oct 21st
Craftsman DA 300 6.75" Collet Extension 0.5" Shank TE300 0500 (LOC2670A)

Craftsman DA 300 6.75" Collet Extension 0.5" Shank TE300 0500 (LOC2670A)

  • Laingsburg, Michigan, United States
  • Oct 21st
Valenite DA 200 7" Collet Extension 0.75" Shank VE 0750 (LOC2670A)

Valenite DA 200 7" Collet Extension 0.75" Shank VE 0750 (LOC2670A)

  • Laingsburg, Michigan, United States
  • Oct 21st
HAAS 4th AXIS 5SC 14 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER

HAAS 4th AXIS 5SC 14 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER

  • Santa Clarita, California, United States
  • Nov 8th
Hauser 19-1/2" 500mm Precision Horizontal Mill Milling Rotary Table Switzerland

Hauser 19-1/2" 500mm Precision Horizontal Mill Milling Rotary Table Switzerland

  • Lorain, Ohio, United States
  • Nov 9th
Vetcoa Aluminum Mill T-Slot Rotary Lift Table Machinist Workholder Powered

Vetcoa Aluminum Mill T-Slot Rotary Lift Table Machinist Workholder Powered

  • Glendale, Arizona, United States
  • Nov 9th
3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies