Titebond Advanced Polymer - 1 Pale (3.5 Gallons)

US $119.95

Omaha, Nebraska, United States
Jan 29th

Open on mobile:
QR code

Proven Products LLC ------------------------------------------- If you're looking for high quality and personal service, you've come to the right place. At Proven Products, LLC we'll give you the attention and personal service you’ll come to expect and enjoy. We offer the best in FRP, Spray Foam, Caulk, and all your Cold Storage needs. Our team has over 35 years experience in the industry. We are dedicated to making sure our customers feel they are getting the best products and service available. Whatever project you have, call Proven Products today and we will be there to help you every step of the way. Phone #: 402-827-3880 ------------------------------------------- Product Info: Environmentally safe - VOC-compliant Fast strength development Nonflammable - No offensive odor Ideal for FRP, laminate & more Bonds non-porous surfaces Moisture, mold & mildew resistant Achieves NFPA Class A fire rating Physical Properties Type Polyether Calculated VOC 0 g/L (20 g/L during cure) State Low viscosity mastic Weight/gallon 11.2 lbs. Color Light tan Flashpoint > 200°F (Pensky-Martens Closed Cup) Solids 100% Freeze/thaw stability Not affected by freezing Viscosity 125,000 cps Storage life 12 months in unopened container Coverage: 60 sq. ft. per gallon Application Guidelines Application Temperature Over 50°F and below 90°F for adhesive and substrates. Service Temperature Range -40°F. to 220°F. Method of Application V-notch trowel 3/16" wide x 1/4" deep, spaced 11/16" c.c. Working Time 20 minutes at 70°F. Working Surfaces Surfaces must be free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps, high spots, dust, oil, and grease. Cut and pre-fit all panels. Lay panels flat and let them acclimate to room temperature 24 hours before installing. Note: Bracing may be required if walls or panels are not straight. Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be over-sized to allow for natural movement of the panel. Cleanup It is important to clean-up adhesive immediately while still wet. To clean adhesive from panel, tools and hands while wet, use mineral spirits and a rag. Once adhesive has cured, it can be extremely difficult to remove. Follow solvent vendor’s precautions. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Titebond
MPN	4319
Model	Advanced Polymer
Country/Region of Manufacture	United States
UPC	037083043198