Toggler Toggle Tc Commercial Drywall Anchor Polypropylene Made In Us 5/8" To ...

US $150

  • US, United States
  • Jun 5th
TOGGLER Toggle TC Commercial Drywall Anchor, Polypropylene, Made in US, 5/8" to 3/4" Grip Range, For #6 to #14 Fastener Sizes (Pack of 100) Package Quantity: 1 The TOGGLER Toggle TC commercial drywall anchor provides a firm hold in 5/8"- to 3/4"-thick drywall, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before a 6 to 14 size screw with a minimum thread length of 1-1/2" can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts 6 to 14 size screws with a minimum thread length of 1-1/2". The Toggle TC anchor meets Federal Specification FF-B-588-D for Type IV anchors. Specifications Ultimate Tensile Strength Values Anchor Drill Diameter Screw Description 1/4" Plywood 1/2" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" 8 x 1-1/4" 124 lb. Not applicable Not applicable Not applicable Not applicable TB 5/16" 8 x 1-1/2" Not applicable 175 lb. 97 lb. 143 lb. Not applicable TC 5/16" 8 x 1-3/4" Not applicable Not applicable Not applicable Not applicable 159 lb. Ultimate Shear Strength Values Anchor Drill Diameter Screw Description 1/4" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" 8 x 1-1/4" 265 lb. Not applicable Not applicable Not applicable TB 5/16" 8 x 1-1/2" Not applicable 126 lb. 167 lb. Not applicable TC 5/16" 8 x 1-3/4" Not applicable Not applicable Not applicable 237 lb. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin. Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds. TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT. What's in the Box? (100) TOGGLER Toggle TC anchors (1) Setting key Product Dimensions: 5 x 5 x 3 inches Item Weight: 5.6 ounces Shipping Weight: 5.6 ounces Manufacturer: Mechanical Plastics Corp. Origin: USA Item model number: 49-093 Commercial drywall anchor provides a firm hold from within 5/8"- to 3/4"-thick drywall Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes Made in USA, and accepts #6 to #14 size screws (sold separately) Ultimate tensile strength is 159 lb. in 5/8" drywall with a #8 x 1-3/4" screw Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)

Directions

Similar products from Hangers & Connectors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies