+ Post new Ad
Tool Post Dial Indicator Stand, 6 Lathe Centers & More (#2176), US $470 – Picture 0
Tool Post Dial Indicator Stand, 6 Lathe Centers & More (#2176), US $470 – Picture 0

Tool Post Dial Indicator Stand, 6 Lathe Centers & More (#2176)

US $470

  • Ivoryton, Connecticut, United States
  • Jun 9th
Open on mobile:
QR code
Lot of 6 MT2 dead centers, tool post dial indicator stand plus clamp-on indicator stand parts .  Inventory # (2176) The original owner of a Model 405-Z lathe, machinist C. Russell, produced some very well-made accessories for his lathe. This tool post indicator stand is one of them. C. Russell also produced a follower rest, a large face plate, a radius-cutting tool, collet chuck, micrometer carriage stop, threading stop, and several other pieces listed separately. The tool post stand is stamped with the makers name and date, Nov, 18, 1936. The base is 3/8" wide x 5/8" high base. 4-1/4" high overall.  Lot also includes 6 various MT2 dead centers, left as found.  There is also a clamp-on dial indicator stand with some related parts.   Safety First! Always use the right part! See photos! Only what is shown in the photos is included.  We'll be parting out several lathes over the next few weeks so check out our metalworking machinery category if you need parts.  I'm happy to combine shipping for big savings. Canadian Customers please note that I ship direct to Canada and that you do not need to use the eBay GSP shipping option.  See photos for general condition of finish. Offered as-is.   Please contact me with any questions or requests for more information.  Please visit my store, The Rusty Dragon, where there's always something old to see.  See store policies below: Store Policies (click here)

Directions

Similar products from Live Centers

3: Jarno 10 Half Dead Center HSS Carbide Metal Lathe Brown Sharpe Cincinnati

3: Jarno 10 Half Dead Center HSS Carbide Metal Lathe Brown Sharpe Cincinnati

  • Yorktown, Virginia, United States
  • Jun 10th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 64T 60T & 56T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 64T 60T & 56T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 52T 46T & 44T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 52T 46T & 44T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 40T & 36T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 40T & 36T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
TAFT & PIERCE 52” Bench Center

TAFT & PIERCE 52” Bench Center

  • Euclid, Ohio, United States
  • Jun 9th
KM 40 Dead Center UT40F 264 11 003 7F (LOC1968A)

KM 40 Dead Center UT40F 264 11 003 7F (LOC1968A)

  • Laingsburg, Michigan, United States
  • Jun 9th
Improved Nielson 16JPD Lathe Live Center #7? Morse Taper Shank 5" Dia.

Improved Nielson 16JPD Lathe Live Center #7? Morse Taper Shank 5" Dia.

  • Clare, Michigan, United States
  • Jun 9th
Lathe Live Center #4? Morse Taper Shank 3" Dia.

Lathe Live Center #4? Morse Taper Shank 3" Dia.

  • Clare, Michigan, United States
  • Jun 9th
Z LIVE CENTER L03002MT3 L03002 Extended Nose Live Center, Morse Taper Number 3

Z LIVE CENTER L03002MT3 L03002 Extended Nose Live Center, Morse Taper Number 3

  • United States, United States
  • Jun 9th
PAIR OF MAZAK ER25 CNC LATHE / TURNING CENTER AXIAL LIVE TOOL HOLDERS - VDI 40

PAIR OF MAZAK ER25 CNC LATHE / TURNING CENTER AXIAL LIVE TOOL HOLDERS - VDI 40

  • La Puente, California, United States
  • Jun 9th
The Ready Tool Co. Stratford Conn. USA No.TL4 Large Heavy Duty Live Center 9"

The Ready Tool Co. Stratford Conn. USA No.TL4 Large Heavy Duty Live Center 9"

  • Mercersburg, Pennsylvania, United States
  • Jun 9th
Pair of Centers, MT-2 & MT-3 & MT-2 to MT 3 Adapter (#1989)

Pair of Centers, MT-2 & MT-3 & MT-2 to MT 3 Adapter (#1989)

  • Ivoryton, Connecticut, United States
  • Jun 9th
Royal Products 11524 2 MT Dead Center With Oversized Carbide Point

Royal Products 11524 2 MT Dead Center With Oversized Carbide Point

  • US, United States
  • Jun 9th
1-1/8" (1" pilot ) shell mill tool holder V Taper SPI 74-673-5 USA ((X2))

1-1/8" (1" pilot ) shell mill tool holder V Taper SPI 74-673-5 USA ((X2))

  • Fenton, Missouri, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Lathe Gears 5/8" Center for Logan ?

MACHINIST TOOLS LATHE MILL Machinist Lot of Lathe Gears 5/8" Center for Logan ?

  • Morris Plains, New Jersey, United States
  • Jun 9th
Grizzly H3403 Cupped Live Center For Wood Lathe, MT1 New Gift

Grizzly H3403 Cupped Live Center For Wood Lathe, MT1 New Gift

  • United States, United States
  • Jun 9th
LIVE CENTER MT #6 R-26 HD RENDY TOOL LOC1250

LIVE CENTER MT #6 R-26 HD RENDY TOOL LOC1250

  • Sidney, Ohio, United States
  • Jun 9th
Royal Products 10445 5MT Heavy Duty Quad Bearing Live Center, USA (9.4)

Royal Products 10445 5MT Heavy Duty Quad Bearing Live Center, USA (9.4)

  • Saint Louis, Missouri, United States
  • Jun 9th
Riten 12105 Taper Shank Live Center, 5MT, 1-1/2" Point Diameter, 1000 RPM (25B)

Riten 12105 Taper Shank Live Center, 5MT, 1-1/2" Point Diameter, 1000 RPM (25B)

  • Saint Louis, Missouri, United States
  • Jun 9th
Small Lot Various Lathe Centers (#2011)

Small Lot Various Lathe Centers (#2011)

  • Ivoryton, Connecticut, United States
  • Jun 9th

People who viewed this item also vieved

Starrett 278 v-block

Starrett 278 v-block

  • Greeley, Colorado, United States
  • Jan 30th
Matched Cast Iron Vee Blocks (Inv.2614)

Matched Cast Iron Vee Blocks (Inv.2614)

  • Portland, Connecticut, United States
  • Jan 30th
Machinist 1 2 3 Block Set of 2 Nice condition o major scars

Machinist 1 2 3 Block Set of 2 Nice condition o major scars

  • Staunton, Virginia, United States
  • Jan 30th
Bison chuck 3 jaw / 6 1/4 / southbend 1 1/2 mount

Bison chuck 3 jaw / 6 1/4 / southbend 1 1/2 mount

  • Harwood, Maryland, United States
  • Jan 30th
Cushmen Chuck Jaws (2) 1&4 Model#-8216C

Cushmen Chuck Jaws (2) 1&4 Model#-8216C

  • Brooksville, Florida, United States
  • Jan 30th
82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

  • New Britain, Connecticut, United States
  • Jan 30th
MACHINIST LATHE MILL 2 NICE Small Welding Machinist Clamps SAV

MACHINIST LATHE MILL 2 NICE Small Welding Machinist Clamps SAV

  • Morris Plains, New Jersey, United States
  • Jan 30th
5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

  • Lake Villa, Illinois, United States
  • Jan 30th
4" TE-CO Adjustable Toe Clamp Set

4" TE-CO Adjustable Toe Clamp Set

  • Miami Beach, Florida, United States
  • Jan 30th
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-015

COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-015

  • West Palm Beach, Florida, United States
  • Jan 30th
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

  • West Palm Beach, Florida, United States
  • Jan 30th
LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

  • Fairfield, Iowa, United States
  • Jan 30th
JFK 5C LEVER COLLET CLOSER WITH DRAW BAR FOR LATHE SPINDLE

JFK 5C LEVER COLLET CLOSER WITH DRAW BAR FOR LATHE SPINDLE

  • Hallandale, Florida, United States
  • Jan 30th
Lathe 5C Collet Closer

Lathe 5C Collet Closer

  • Hallandale, Florida, United States
  • Jan 30th
COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

  • Resaca, Georgia, United States
  • Jan 30th
Parallels, (2) Sets of Machinist Parallels, .745 & .920" High, Made by Toolmaker

Parallels, (2) Sets of Machinist Parallels, .745 & .920" High, Made by Toolmaker

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Vacuum Chuck Dunham 6"x12" W/ Vacuum Pump & Motor Works Great !!!

Vacuum Chuck Dunham 6"x12" W/ Vacuum Pump & Motor Works Great !!!

  • Providence, Rhode Island, United States
  • Jan 30th
V Blocks, (2) Brown & Sharpe No. 599-750-1 Matched Pair V Blocks, USA

V Blocks, (2) Brown & Sharpe No. 599-750-1 Matched Pair V Blocks, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Vlier, Spring Stop, SS92B, 2" x 2", new

Vlier, Spring Stop, SS92B, 2" x 2", new

  • Maryland Heights, Missouri, United States
  • Jan 30th
Hainbuch PP 100 Pneumatic PP type Changing Fixture

Hainbuch PP 100 Pneumatic PP type Changing Fixture

  • Middlebury, Indiana, United States
  • Jan 30th
1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

  • KENGERI, KARNATAKA, India
  • Jan 30th
TANSHING ROTARY TABLE

TANSHING ROTARY TABLE

  • Seekonk, Massachusetts, United States
  • Jan 30th
NIKKEN CNC-321TF Rotary Table and Controller

NIKKEN CNC-321TF Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th
NIKKEN CNC-401T Rotary Table and Controller

NIKKEN CNC-401T Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th
LittlestownVise 4" Jaw Width x 3 5/8" Opening Bench Mount Vise Classic Red *USA*

LittlestownVise 4" Jaw Width x 3 5/8" Opening Bench Mount Vise Classic Red *USA*

  • Waterford, Michigan, United States
  • Jan 30th
Swivel Base for Milling Machine Vise Its 13/12

Swivel Base for Milling Machine Vise Its 13/12

  • Van Nuys, California, United States
  • Jan 30th
PALMGREN No 250 MACHINIST / DRILL PRESS VISE!

PALMGREN No 250 MACHINIST / DRILL PRESS VISE!

  • Sacramento, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies