TRIAD BALLAST B2321277RH-A Electronic 277V 2 lamp, US $26.95 – Picture 0

TRIAD BALLAST B2321277RH-A Electronic 277V 2 lamp, US $26.95 – Picture 1

TRIAD BALLAST B2321277RH-A Electronic 277V 2 lamp, US $26.95 – Picture 2

Triad Ballast B2321277rh-a Electronic 277v 2 Lamp

US $26.95

Torrance, California, United States
Feb 13th

Open on mobile:
QR code

Triad Electronic Ballast NEW surplus 277V 2 lamp B2321277RH-A Fluorescent-Electronic FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) PAGE 1-7 Specifications • Ballasts shall include 18AWG solid copper leads color coded in compliance with ANSI C82.11-2011. • Ballasts shall be instant start and provide starting sequence consistent with ANSI standard C82.11-2011. • Ballasts (1-4 lamps) shall operate as Parallel Circuit, allowing remaining lamp(s) to maintain full light output if one or more lamps fail. • Ballasts shall operate from 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 42 kHz to minimize interference with infrared control systems. • Ballasts shall tolerate operation in ambient temperatures up to 105°F (40°C) without damage. • Ballasts shall have a minimum starting temperature of 0°F (-18°C) for the primary lamp application. • Ballasts shall have a maximum case temperature test point of 75°C printed on the label for easy fixture testing and trouble shooting. • Ballasts shall support 18’ maximum lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (Radiated). • Ballasts shall provide transient immunity as recommended by ANSI C82.11-2011. • Ballasts shall auto-restrike allowing replacement of lamps without cycling power. • Ballasts shall incorporate Anti-Striation Circuitry for stable operation of reduced wattage lamps. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open circuit and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor and/or CSA certified for both US and Canadian application. • Ballasts shall meet NEMA Premium/CEE High Performance for high efficiency operation. • Ballasts shall be quiet Class A sound rating. • Ballasts shall have a Ballast Factor for the primary lamp application of greater than .77 for EL, .85 for HE and 1.15 for HEH, per ANSI C82.11-2011. • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp. • Ballasts shall have a Power Factor greater than .98 for primary lamp. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001/ISO 9002 certified facility in North America. • Ballasts shall be Universal Lighting Technologies Bx32IUNVHP-N (x=1or 2) or Bx32IUNVHP-A (x= 3or 4) depending upon the quantity of lamps per fixture.

“NEW surplus”

Brand	Triad
MPN	B2321277RHA
UPC	768386171867