Used SU60K Power Array with BP480V40C Battery Pack removed from service in working condition. 60KVA 48000W 220V 167A Battery Pack 480VDC 143A The battery wiring in the battery pack will be included, batteries were removed. The battery pack uses 40- GP-12400 batteries. Please see pictures for details. Shipping will be with freight to a business address only. Only what you see in the photos will be included. Information below is from the manufacturers website for this unit. - SmartOnline 120/208V 3-Phase Wye 60kVA Modular 3-Phase UPS System, On-line Double-Conversion Features N+1 configuration: three self-contained, redundant 20kVA power modules can be hot-swapped(with the load powered) if maintenance is required 1+1 configuration: connect two SU60K models in parallel to provide fail-safe redundancy or to increase capacity High input power factor, advanced IGBT inverter technology and Digital Signal Processor(DSP) technology create low input Total Harmonic Distortion(THDi) Extremely efficient operation(up to 96%) saves money by lowering electricity consumption True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems 60,000VA/48,000W power capacity with 3-phase, hardwire 120/208VAC input/output connections Features a wide input voltage correction range: 94-150/163-260VAC Precision +/-1% output voltage regulation A stand-alone hardwired external battery module(Models BP480V26B and BP480V40C, available separately from Tripp Lite) is required for operation and to provide battery backup support. Additional external battery modules can be connected for extended runtime. Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed Dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server Accessory slot accepts an optional internal SNMP card(Model SNMPWEBCARD) for remote shutdowns, reboots and more Emergency Power Off button turns UPS output OFF and disables Bypass output Built-in Emergency Power Off(EPO) dry-contact interface supports remote emergency shutdown in large facilities Start-up service program is recommended to enhance the reliability of the installation Specifications OUTPUT Output Volt Amp Capacity (VA) 60000 Output kVA Capacity (kVA) 60 Output Watt Capacity (Watts) 48000 Output kW Capacity (kW) 48 Power Factor 0.8 Crest Factor 3:1 Nominal Output Voltage(s) Supported 120/208V 3-PH Wye Frequency Compatibility 50 / 60 Hz Output Voltage Regulation (Line Mode) +/- 1% Output Voltage Regulation (Battery Mode) +/- 1% Output Receptacles Hardwire Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) Pure Sine wave INPUT Rated input current (Maximum Load) 125A (per phase, online) Nominal Input Voltage(s) Supported 120/208V 3-PH Wye Nominal Input Voltage Description 3-Phase Wye, 4 wire (L1, L2, L3, N, G) UPS Input Connection Type Hardwire Input Phase 3-Phase BATTERY Expandable Battery Runtime Battery set sold separate External Battery Pack Compatibility BP480V200; BP480V26B; BP480V300; BP480V400; BP480V40C; BP480V500 Expandable Runtime Description External battery pack wiring is contractor supplied DC System Voltage (VDC) +/- 240VDC Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% Battery Replacement Description Hot-swappable, replaceable batteries Expandable Runtime Yes VOLTAGE REGULATION Voltage Regulation Description Online, double-conversion power conditioning Overvoltage Correction Maintains continuous operation without using battery power during overvoltages to 150 / 260 (3-Phase, 4-Wire, wye), reducing output within 1% of nominal Undervoltage Correction Maintains continuous operation without using battery power during brownout / undervoltage conditions to 94 / 163 (3-Phase, 4-Wire, wye) USER INTERFACE, ALERTS & CONTROLS Switches ON button turns UPS's inverter ON. OFF button turns UPS's inverter OFF. LCD Display Control Buttons browses through and selects items displayed on LCD screen. Emergency Power Off button turns UPS output OFF and disables Bypass output. Manual Bypass breaker bypasses the UPS's inverter during maintenance. Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch Audible Alarm Alarms warn against a variety of operational conditions: low-battery, overload, shutdown, bypass and more LED Indicators 4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions SURGE / NOISE SUPPRESSION EMI / RFI AC Noise Suppression Yes AC Suppression Joule Rating 4675 AC Suppression Response Time Instantaneous PHYSICAL Installation Form Factors Supported with Included Accessories Tower Primary Form Factor Tower UPS Power Module Dimensions (hwd, in.) 66.9 x 20.5 x 37.7 UPS Power Module Weight (lbs.) 1177.5 UPS Shipping Dimensions (hwd / in.) 74.8 x 28.5 x 45 Shipping Weight (lbs.) 1356 Cooling Method Fans UPS Housing Material Steel ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC Mode BTU / Hr. (Full Load) 13998 COMMUNICATIONS Communications Interface DB9 Serial; Slot for SNMP/Web interface PowerAlert Software Included Communications Cable DB9 cabling included LINE / BATTERY TRANSFER Transfer Time No transfer time (0 ms.) in online, double-conversion mode Low Voltage Transfer to Battery Power (Setpoint) Maintains continuous operation during undervoltages as low as 94 / 163V AC (3-Phase, 4-Wire, wye). Below this point, output is maintained utilizing battery reserves. High Voltage Transfer to Battery Power (Setpoint) Maintains continuous operation during overvoltages as high as 150 / 260V AC (3-Phase, 4-Wire, wye). Above this point, output is maintained utilizing battery reserves. SPECIAL FEATURES Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported High Availability UPS Features Automatic inverter bypass; Hot swappable batteries Green Energy-Saving Features High efficiency economy mode operation; Schedulable daily hours of economy mode operation
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
