+ Post new Ad
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 0
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 1
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 2
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 3
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 4
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 5
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 0
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 1
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 2
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 3
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 4
Univise- COMPLETE Rockwell "Univise", US $630 – Picture 5

Univise- Complete Rockwell "univise"

US $630

  • Naubinway, Michigan, United States
  • Mar 10th
Open on mobile:
QR code
Univise - Complete Rockwell "Univise" with base, three (3) graduated rotating arms, and fourth (4th) graduated arm being the clamping fixture or vise. Two (2) alignment "keys" in base. Used. All original paint and age patina. Very smooth operation, and accurate. Well maintained. This Univise has made many intricate models. Used in milling, drilling, shaping, grinding, and hand carving. Made in USA.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Well maintained”

Directions

Similar products from Grips & Tongs

vise handle

vise handle

  • Duluth, Georgia, United States
  • Mar 11th
RIDGID B-C-2 Chain strap pipe vice 1/2" - 2" made in USA

RIDGID B-C-2 Chain strap pipe vice 1/2" - 2" made in USA

  • Otis, Oregon, United States
  • Mar 11th
VULCAN No.4 chain strap pipe vice 1/2"-8" J.H. Williams & Co. EXCELLENT COND

VULCAN No.4 chain strap pipe vice 1/2"-8" J.H. Williams & Co. EXCELLENT COND

  • Otis, Oregon, United States
  • Mar 11th
Speed Vise Model 3B by Cardinal Machine CO Glendale California USA

Speed Vise Model 3B by Cardinal Machine CO Glendale California USA

  • Los Angeles, California, United States
  • Mar 11th
Drill Press Vise

Drill Press Vise

  • Enumclaw, Washington, United States
  • Mar 11th
MACHINIST TOOLS LATHE MILL Machinist Palmgren 2 1/2" Vise for Drilling Milling

MACHINIST TOOLS LATHE MILL Machinist Palmgren 2 1/2" Vise for Drilling Milling

  • Morris Plains, New Jersey, United States
  • Mar 11th
Kurt D810 Vise D 810

Kurt D810 Vise D 810

  • Portland, Oregon, United States
  • Mar 11th
MACHINIST LATHE MILL NICE CLEAN Machinist Milling Vise Handle Crank 1/2" Square

MACHINIST LATHE MILL NICE CLEAN Machinist Milling Vise Handle Crank 1/2" Square

  • Morris Plains, New Jersey, United States
  • Mar 11th
Kurt Magnetic Work Stop For All Vise & Vises NEW

Kurt Magnetic Work Stop For All Vise & Vises NEW

  • Columbus, Ohio, United States
  • Mar 10th
"KURT" SWIVEL BASE FOR VISES X632

"KURT" SWIVEL BASE FOR VISES X632

  • Montville, Ohio, United States
  • Mar 10th
Vintage Antique Rock Island MFG. Co. ILL Large Vise Clamp Sharpening Tool Stone

Vintage Antique Rock Island MFG. Co. ILL Large Vise Clamp Sharpening Tool Stone

  • Brooklyn, New York, United States
  • Mar 10th
vintage table top pipe clamp,steam punk table art

vintage table top pipe clamp,steam punk table art

  • Havana, Illinois, United States
  • Mar 10th
MELIN HSS 7/16" x 1/2" 4 Flute D/E End Mill

MELIN HSS 7/16" x 1/2" 4 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 10th
MELIN HSS COBALT 1/4" x 3/8" 2 Flute S/E Long End Mill

MELIN HSS COBALT 1/4" x 3/8" 2 Flute S/E Long End Mill

  • Johnson City, New York, United States
  • Mar 10th
QUINCO HSS 5/64" x 3/16" 4 Flute D/E End Mill

QUINCO HSS 5/64" x 3/16" 4 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 10th
QUINCO HSS 5/32" x 3/16" 4 Flute D/E End Mill

QUINCO HSS 5/32" x 3/16" 4 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 10th
QUINCO HSS 9/64" x 3/16" 2 Flute D/E End Mill

QUINCO HSS 9/64" x 3/16" 2 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 10th
Table Milling Machine Power Feed Y-Axis Torque 135 LBS

Table Milling Machine Power Feed Y-Axis Torque 135 LBS

  • Fountain Inn, South Carolina, United States
  • Mar 10th
6" Milling Machine Vise, 9" Jaw Opening

6" Milling Machine Vise, 9" Jaw Opening

  • San Leandro, California, United States
  • Mar 10th
Vintage Small Clamp-Base Bench Vice Made in Japan

Vintage Small Clamp-Base Bench Vice Made in Japan

  • Hartwell, Georgia, United States
  • Mar 10th

People who viewed this item also vieved

LATHE BELL CENTER, 4" DIA., #3 MORSE,

LATHE BELL CENTER, 4" DIA., #3 MORSE,

  • Overland Park, Kansas, United States
  • Jan 30th
MACHINIST LATHE TURET HOLDER

MACHINIST LATHE TURET HOLDER

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
MACHINIST LATHE TOOL SKINNER CHUCK COMPANY THREE JAW No. A5406-51 Trade Mark USA

MACHINIST LATHE TOOL SKINNER CHUCK COMPANY THREE JAW No. A5406-51 Trade Mark USA

  • Kingman, Arizona, United States
  • Jan 30th
Lathe chuck jaws 3 Pcs looks to be for a 10-12" chuck soft

Lathe chuck jaws 3 Pcs looks to be for a 10-12" chuck soft

  • Montebello, California, United States
  • Jan 30th
vintage Grand Tank No. 6 c clamp

vintage Grand Tank No. 6 c clamp

  • Urbana, Ohio, United States
  • Jan 30th
Starrett No. 93A T-handle tap Wrench 1/16" to 5/32"

Starrett No. 93A T-handle tap Wrench 1/16" to 5/32"

  • Broadview Heights, Ohio, United States
  • Jan 30th
LOT 19 NEW HILTI MSA-F 3/8IN 257416 SIZE 3/8IN IRON CLAMP B347848

LOT 19 NEW HILTI MSA-F 3/8IN 257416 SIZE 3/8IN IRON CLAMP B347848

  • Buffalo, New York, United States
  • Jan 30th
LOT OF 6 2" 5C STEP COLLETS HARDINGE

LOT OF 6 2" 5C STEP COLLETS HARDINGE

  • Ellington, New York, United States
  • Jan 30th
LOT OF 4 2" DEEP 5C STEP COLLETS HARDINGE

LOT OF 4 2" DEEP 5C STEP COLLETS HARDINGE

  • Ellington, New York, United States
  • Jan 30th
Hardinge 4c Collet 5/8

Hardinge 4c Collet 5/8

  • Rensselaer, New York, United States
  • Jan 30th
HEAVY DUTY 8" LATHE CHUCK MOUNTING PLATE W/ 2-3/16" - 3

HEAVY DUTY 8" LATHE CHUCK MOUNTING PLATE W/ 2-3/16" - 3

  • Chino, California, United States
  • Jan 30th
5" Sine Bar - Machinist Tools

5" Sine Bar - Machinist Tools

  • Thousand Oaks, California, United States
  • Jan 30th
VINTAGE L S STARRETT NO. 271 V-BLOCKS PAIR WITH 1 CLAMP

VINTAGE L S STARRETT NO. 271 V-BLOCKS PAIR WITH 1 CLAMP

  • Alexander City, Alabama, United States
  • Jan 30th
Cleaveland #1 high speed Dead center

Cleaveland #1 high speed Dead center

  • New Lenox, Illinois, United States
  • Feb 13th
No. 2 Morst taper dead center

No. 2 Morst taper dead center

  • New Lenox, Illinois, United States
  • Feb 13th
Alcoa Fastening Systems EBRT100-10

Alcoa Fastening Systems EBRT100-10

  • Dallas, Georgia, United States
  • Feb 14th
ITW Workholding 7082D25 Push Rod

ITW Workholding 7082D25 Push Rod

  • Peoria, Illinois, United States
  • Feb 14th
Magnetic Lifter 100KG / 220Lbs Lifting Magnet Max Capacity on 2" Steel Hoist Mag

Magnetic Lifter 100KG / 220Lbs Lifting Magnet Max Capacity on 2" Steel Hoist Mag

  • Maryville, Tennessee, United States
  • Feb 14th
Starrett matched set of V-blocks No. 568 with clamps

Starrett matched set of V-blocks No. 568 with clamps

  • Schwenksville, Pennsylvania, United States
  • Mar 25th
TTC VEE- BLOCK SET ITEM 57-071-117 SET IS 2 VEE BLOCKS AND CLAMPS

TTC VEE- BLOCK SET ITEM 57-071-117 SET IS 2 VEE BLOCKS AND CLAMPS

  • Simpsonville, South Carolina, United States
  • Mar 25th
LS Starrett Co Hold Downs No 54C 6 inch 1 Pair sap

LS Starrett Co Hold Downs No 54C 6 inch 1 Pair sap

  • Grand Junction, Colorado, United States
  • Mar 25th
BRAND NEW 4" (100 mm) Tilting Rotary Table for Milling Machines-By ASSORTS

BRAND NEW 4" (100 mm) Tilting Rotary Table for Milling Machines-By ASSORTS

  • DELHI, DELHI, India
  • May 3rd
news rotary table 8 Inch made in japan

news rotary table 8 Inch made in japan

  • South Coffeyville, Oklahoma, United States
  • May 4th
70 mm 4 Jaws INDEPENDENT Chuck with Backplate & T-nut for 3 & 4" Rotary Table

70 mm 4 Jaws INDEPENDENT Chuck with Backplate & T-nut for 3 & 4" Rotary Table

  • DELHI, DELHI, India
  • May 4th
CARBOLOY ERICKSON TOOL 1/8" 100TG SINGLE ANGLE COLLET TG-100

CARBOLOY ERICKSON TOOL 1/8" 100TG SINGLE ANGLE COLLET TG-100

  • Citrus Heights, California, United States
  • May 22nd
SYIC BT40XER40-100 G:2.5 RPM:20000 ER40 CLAMPING NUT UM/RD Collet Chuck

SYIC BT40XER40-100 G:2.5 RPM:20000 ER40 CLAMPING NUT UM/RD Collet Chuck

  • Ashdod, Israel
  • May 23rd
REGO-FIX FLOWDRILL ER25 COLLET CHUCK CYL20X100ER25 STK 4283

REGO-FIX FLOWDRILL ER25 COLLET CHUCK CYL20X100ER25 STK 4283

  • Wadley, Alabama, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies