+ Post new Ad
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 0
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 1
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 2
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 0
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 1
Unused set of Bison bolt on hard top jaws for 6 1/4" three jaw manual chuck., US $95.00 – Picture 2

Unused Set Of Bison Bolt On Hard Top Jaws For 6 1/4" Three Jaw Manual Chuck.

US $95.00

  • Brookfield, Connecticut, United States
  • Jan 30th
Open on mobile:
QR code
 I have multiple sets of unused bolt on hard top jaws for modern 6-1/4" (6") diameter,  3 jaw Bison Chucks.  Listing is for a matched set of three jaws. Real Bison Original Equipment Manufactured  "American Standard Tongue and Groove Jaws" 5/16" (.313") Groove 1/2" (.500") Tongue 2-5/8" Long 1-5/8 Height Bolt holes are 7/16" diameter and 1-1/2" spacing. ID or OD clamping Hardened Mounting Screws not included Bison Part# 7-883-306 Free shipping!  USA buyers only.  Thanks! Will S.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Removed from original packaging after chuck was re-purposed. Zero wear of any kind.”

Directions

Similar products from Other Workholding Tools

2-1/4 TO 3-3/8 " Little Giant Style Jack Screw Set

2-1/4 TO 3-3/8 " Little Giant Style Jack Screw Set

  • Chino, California, United States
  • Jan 30th
SMW 12" Pneumatic Indexer PT315 with Control Box 120V Spare Circuit Board O-Ring

SMW 12" Pneumatic Indexer PT315 with Control Box 120V Spare Circuit Board O-Ring

  • Montville, Ohio, United States
  • Jan 30th
10pc Welding Arrow Magnets Mini 3" 4" 5" Magnetic Holding Holder Arc MIG TIG

10pc Welding Arrow Magnets Mini 3" 4" 5" Magnetic Holding Holder Arc MIG TIG

  • Aurora, Nebraska, United States
  • Jan 30th
Steady Rest How-To build PLANS fits small Metal Lathes

Steady Rest How-To build PLANS fits small Metal Lathes

  • Diamond Point, New York, United States
  • Jan 30th
NEW TB WOODS MNW HYDRAULIC CLUTCH D560-0118 D5600118 1-3/4" BORE -

NEW TB WOODS MNW HYDRAULIC CLUTCH D560-0118 D5600118 1-3/4" BORE -

  • Clover, South Carolina, United States
  • Jan 30th
Destaco Pivot Unit Series 3 PM3 *new*

Destaco Pivot Unit Series 3 PM3 *new*

  • Cumberland, Rhode Island, United States
  • Jan 30th
Feeler Thickness Gage Set .0015-.200 Tempered Steel 1/2" W 14-151-5 QTY 2 |HR2|

Feeler Thickness Gage Set .0015-.200 Tempered Steel 1/2" W 14-151-5 QTY 2 |HR2|

  • Saint Louis, Missouri, United States
  • Jan 30th
6.42-5.2 LNS "SUPER HYDROBAR" 6-SPINDLE BAR FEED - #24851

6.42-5.2 LNS "SUPER HYDROBAR" 6-SPINDLE BAR FEED - #24851

  • Cincinnati, Ohio, United States
  • Jan 30th
MINI-SPRINT S2/32 LNS "HYDROBAR" AUTOMATIC MAGAZINE BAR-FEED - #27223

MINI-SPRINT S2/32 LNS "HYDROBAR" AUTOMATIC MAGAZINE BAR-FEED - #27223

  • Cincinnati, Ohio, United States
  • Jan 30th
SOUTH BEND LATHE CO 2" COLLECTIBLE BRASS COIN - KEEPSAKE #SB1467 NEW

SOUTH BEND LATHE CO 2" COLLECTIBLE BRASS COIN - KEEPSAKE #SB1467 NEW

  • Jacksonville, Florida, United States
  • Jan 30th
HALOGEN BULB FOR 24 INCH FLEX SHAFT LIGHT

HALOGEN BULB FOR 24 INCH FLEX SHAFT LIGHT

  • Chino, California, United States
  • Jan 30th
WILTON Copper Jaw Caps - Model .: 404-4 Chuck Size: 4"

WILTON Copper Jaw Caps - Model .: 404-4 Chuck Size: 4"

  • Flushing, New York, United States
  • Jan 30th
HARDINGE 5PC ADVERTISEMENT LOT #RR296 lathes Milling collets chucks et

HARDINGE 5PC ADVERTISEMENT LOT #RR296 lathes Milling collets chucks et

  • Perth, Ontario, Canada
  • Jan 30th
PHASE II 240-003 TAILSTOCK FOR USE W/ COLLET INDEX FIXTURES / 5C COMPATIBILITY

PHASE II 240-003 TAILSTOCK FOR USE W/ COLLET INDEX FIXTURES / 5C COMPATIBILITY

  • Roanoke, Virginia, United States
  • Jan 30th
Rawldrill Driver w/ Draft Key / JL 207

Rawldrill Driver w/ Draft Key / JL 207

  • Seffner, Florida, United States
  • Jan 30th
Montalvo CD-100B93 Compact Dual Disc Brake 0.93IN Bore w/ Heat Sink

Montalvo CD-100B93 Compact Dual Disc Brake 0.93IN Bore w/ Heat Sink

  • Bay City, Michigan, United States
  • Jan 30th
STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 4-1/2" LONG DOUBLE END NEW 2 PCS $1.50

STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 4-1/2" LONG DOUBLE END NEW 2 PCS $1.50

  • North Tonawanda, New York, United States
  • Jan 30th
STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 6" LONG DOUBLE END NEW 2 PCS $1.65

STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 6" LONG DOUBLE END NEW 2 PCS $1.65

  • North Tonawanda, New York, United States
  • Jan 30th
STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 7" LONG DOUBLE END NEW 2 PCS $1.70

STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 7" LONG DOUBLE END NEW 2 PCS $1.70

  • North Tonawanda, New York, United States
  • Jan 30th
STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 8" LONG DOUBLE END NEW 2 PCS $1.75

STUDS FOR T-SLOT WORK 1/2-13 DIAMETER x 8" LONG DOUBLE END NEW 2 PCS $1.75

  • North Tonawanda, New York, United States
  • Jan 30th

People who viewed this item also vieved

Hardinge 25C Round Smooth Extra Depth Emergency Step Chuck, 8" Size

Hardinge 25C Round Smooth Extra Depth Emergency Step Chuck, 8" Size

  • Spring Hill, Tennessee, United States
  • May 26th
HARDINGE 1K 1/8" DIA COLLET LOC2302

HARDINGE 1K 1/8" DIA COLLET LOC2302

  • Sidney, Ohio, United States
  • May 26th
10 SETS #5-1a COLLET PADS HARDINGE 471 WARNER & SWASEY TURRET LATHE

10 SETS #5-1a COLLET PADS HARDINGE 471 WARNER & SWASEY TURRET LATHE

  • Highland, New York, United States
  • May 26th
SINE BAR 6" MACHINIST

SINE BAR 6" MACHINIST

  • Livingston, New Jersey, United States
  • May 26th
6 X 8 X 5 " ANGLE PLATE

6 X 8 X 5 " ANGLE PLATE

  • California, United States
  • May 26th
Suburban PAW 060606-G 6x6x6 Right Angle Plate Ground

Suburban PAW 060606-G 6x6x6 Right Angle Plate Ground

  • Garden City, Idaho, United States
  • May 26th
DE-STA-CO 2002-U207 Vertical Handle Hold Down Toggle Clamp With 207 Mounting Pat

DE-STA-CO 2002-U207 Vertical Handle Hold Down Toggle Clamp With 207 Mounting Pat

  • Miami, FL, United States
  • May 28th
C-CLAMP 6" CHICAGO. #1486.

C-CLAMP 6" CHICAGO. #1486.

  • Sedona, Arizona, United States
  • May 28th
Clamp Rite Clamp-Rite 13240CR Push-Pull Toggle Clamp, Through Hole Mount, 700 lb

Clamp Rite Clamp-Rite 13240CR Push-Pull Toggle Clamp, Through Hole Mount, 700 lb

  • USA, United States
  • May 28th
Chuck with holder

Chuck with holder

  • Augusta, Kansas, United States
  • May 28th
Tmx 20" 4-Jaw (Hard Solid Jaw) Semi-Steel Body Independent Lathe Chuck

Tmx 20" 4-Jaw (Hard Solid Jaw) Semi-Steel Body Independent Lathe Chuck

  • Hamden, Connecticut, United States
  • May 28th
Tmx 6" 3-Jaws (2 Sets of Hard Solid Jaw) Universal Self-Centering Lathe Chuck

Tmx 6" 3-Jaws (2 Sets of Hard Solid Jaw) Universal Self-Centering Lathe Chuck

  • Hamden, Connecticut, United States
  • May 28th
MT4 Lathe Dead Center Hardened & Ground Steel 60 Degree Point #4 Morse Taper .

MT4 Lathe Dead Center Hardened & Ground Steel 60 Degree Point #4 Morse Taper .

  • New Oxford, Pennsylvania, United States
  • May 29th
NEW 4MTCNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER 4

NEW 4MTCNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER 4

  • Diamond Bar, California, United States
  • May 29th
NEW 3MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER 3

NEW 3MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER 3

  • Diamond Bar, California, United States
  • May 29th
Vise 5177 4" Swivel Vise 2643-277

Vise 5177 4" Swivel Vise 2643-277

  • Hillsdale, New Jersey, United States
  • May 29th
MEADE FOOT AIR CONTROL PEDAL AIR CONTROLLER PEDAL PNEUMATIC FOR FIXTURE & VISES.

MEADE FOOT AIR CONTROL PEDAL AIR CONTROLLER PEDAL PNEUMATIC FOR FIXTURE & VISES.

  • Duncansville, Pennsylvania, United States
  • May 29th
Vintage PALMGREN Drill Press Vise - 1.5" Wide, 1.5" Jaw Opening - Old USA Tools

Vintage PALMGREN Drill Press Vise - 1.5" Wide, 1.5" Jaw Opening - Old USA Tools

  • Malden, Massachusetts, United States
  • May 29th
STEP BLOCKS,6 inch,machinist block,clamping block,tooling,milling,work holding

STEP BLOCKS,6 inch,machinist block,clamping block,tooling,milling,work holding

  • Reno, Nevada, United States
  • Jun 9th
Magnetic V - Blocks

Magnetic V - Blocks

  • National Park, New Jersey, United States
  • Jun 9th
Set of 2 large Toolmaker's V Blocks, HARDENED STEEL!

Set of 2 large Toolmaker's V Blocks, HARDENED STEEL!

  • Rancho Cucamonga, California, United States
  • Jun 9th
HAAS HRT9 / HRT210 PRECISION CNC ROTARY TABLE

HAAS HRT9 / HRT210 PRECISION CNC ROTARY TABLE

  • Valencia, California, United States
  • Jun 9th
Hardinge GD5C2 5c 4th axis indexer cnc ha5c haas kitagawa yuasa nikken tsudakoma

Hardinge GD5C2 5c 4th axis indexer cnc ha5c haas kitagawa yuasa nikken tsudakoma

  • Rolla, Missouri, United States
  • Jun 9th
MACHINIST MILL LATHE Machinist 6" Micro Rotary Table for Set Up Milling

MACHINIST MILL LATHE Machinist 6" Micro Rotary Table for Set Up Milling

  • Morris Plains, New Jersey, United States
  • Jun 9th
royal ER11 collet 1/8

royal ER11 collet 1/8

  • Hadley, Pennsylvania, United States
  • Jun 13th
lot of ER11 collets 6.5, 4.5-5, 3.5

lot of ER11 collets 6.5, 4.5-5, 3.5

  • Hadley, Pennsylvania, United States
  • Jun 13th
"Quick Yo-Yo Maker-Jumbo Round 3-1/2"""

"Quick Yo-Yo Maker-Jumbo Round 3-1/2"""

  • Hickory Hills, Illinois, United States
  • Jun 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies