+ Post new Ad
Uryu/AIMCO Angled Pulse Tool, Alpha T70C, US $1,000.00 – Picture 0
Uryu/AIMCO Angled Pulse Tool, Alpha T70C, US $1,000.00 – Picture 0

Uryu/aimco Angled Pulse Tool, Alpha T70c

US $1,000.00

  • New Berlin, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
Some light marks on the housing, but has seen limited use.  Still in very good condition. SAFETY FEATURES _ Torque reaction is virtually eliminated to reduce wrist injury to operator and create ergonomic working environment. _ Optimum torque accuracy and repeatability. _ Uniform fastening torque with narrow mean-shift torque for hard and soft joints thanks to a unique torque control shut-off device (no timer). _ External one-touch adjustment for automatic shut-off. _ Uryu quality and design. SETTING OF TIGHTENING TORQUE AIR SUPPLY LINE SIZE: 3/8” to 1/2” drive should use 3/8” ID line and 3/4” to 1” drive should use 1/2” ID line. AIR PRESSURE: Use air pressure 5.0 - 6.0 Kgf/cm2 (70-85 PSI) for optimum performance. Caution: Never use higher air pressure to increase the output of the tool. Overloading will drastically shorten the life of all internal parts. DRY AND CLEAN AIR: Drain daily, and install filter at or near the take-off point to prevent trouble from foreign matter. AIR HOSE AND JOINTS: Use air hose (the shorter, the better), joints, and other fittings of good condition and of proper size to avoid pressure drop. LUBRICATION MAINTENANCE REGULAR OVERHAUL: It is recommended that after every 150,000 pulsing seconds or 180 days the fluid in the tool’s pulse unit be changed. It is also recommended at such time to grease the bearings in the air motor. If the presence of water is noted, it is recommended that a small amount of oil be run through the air motor to wash out any rust residue in the air motor. It is recommended that after every 300,000 pulsing seconds or 365 days that a pulse unit repair kit be installed in the pulse unit. This also allows the inspection of hard parts in the pulse unit. Please Read! All Pictures are of the exact item that will be sent to you. No Returns Will Only Ship to Continental U.S
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand AIMCO
Model Alpha T70C

Directions

Similar products from Wrenches

Bosch Pneumatic Nutrunner 0-607-461-600 40Nm 260/min

Bosch Pneumatic Nutrunner 0-607-461-600 40Nm 260/min

  • Elkhart, Indiana, United States
  • Jan 30th
Bosch Pneumatic Screwdriver 0-607-453-204 6 BAR 1250/m

Bosch Pneumatic Screwdriver 0-607-453-204 6 BAR 1250/m

  • Elkhart, Indiana, United States
  • Jan 30th
Bosch Pneumatic Screwdriver 0-607-454-210 6 BAR 1100/m

Bosch Pneumatic Screwdriver 0-607-454-210 6 BAR 1100/m

  • Elkhart, Indiana, United States
  • Jan 30th
Bosch Pneumatic Screwdriver 0-607-454-225 1600/m 6.3BAR

Bosch Pneumatic Screwdriver 0-607-454-225 1600/m 6.3BAR

  • Elkhart, Indiana, United States
  • Jan 30th
Bosch Pneumatic Screwdriver 0-607-453-222 950/m 6.3 BAR

Bosch Pneumatic Screwdriver 0-607-453-222 950/m 6.3 BAR

  • Elkhart, Indiana, United States
  • Jan 30th
Scintilla 0-507-417-411 Pneumatic Screwdriver 224/min

Scintilla 0-507-417-411 Pneumatic Screwdriver 224/min

  • Elkhart, Indiana, United States
  • Jan 30th
Bosch Pneumatic Screwdriver 0-607-451-220 770/m 6 BAR

Bosch Pneumatic Screwdriver 0-607-451-220 770/m 6 BAR

  • Elkhart, Indiana, United States
  • Jan 30th
Chicago Pneumatic CA 127051 Model 958 Impact Wrench Plate

Chicago Pneumatic CA 127051 Model 958 Impact Wrench Plate

  • Peoria, Illinois, United States
  • Jan 30th
Chicago Pneumatics CA127025 Impact Wrench CP6031T Dog Clutch

Chicago Pneumatics CA127025 Impact Wrench CP6031T Dog Clutch

  • Peoria, Illinois, United States
  • Jan 30th
Desoutter Angle Head, Shut off Nutrunner , H489-N-750

Desoutter Angle Head, Shut off Nutrunner , H489-N-750

  • New Berlin, Wisconsin, United States
  • Jan 30th
NEW STANLEY F4150 TRANSDUCER

NEW STANLEY F4150 TRANSDUCER

  • United States
  • Jan 30th
CP IMPACT UNIVERSAL JOINT #5 SPLINE EXCELLENT

CP IMPACT UNIVERSAL JOINT #5 SPLINE EXCELLENT

  • Seekonk, Massachusetts, United States
  • Jan 30th
CHICAGO PNEUMATIC CP7735 HEAVY DUTY LIGHTWEIGHT IMPACT WRENCH 3/8" CPT7735 7735

CHICAGO PNEUMATIC CP7735 HEAVY DUTY LIGHTWEIGHT IMPACT WRENCH 3/8" CPT7735 7735

  • Granby, Quebec, Canada
  • Jan 30th
Cleco,Right Angle Nutrunner, Clecomatic clutch, 5-9 FT-LB. 24RAA12AM3

Cleco,Right Angle Nutrunner, Clecomatic clutch, 5-9 FT-LB. 24RAA12AM3

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco,Right Angle Nutrunner, Clecomatic clutch, 14-27 FT-LB. 34RAA37AX3

Cleco,Right Angle Nutrunner, Clecomatic clutch, 14-27 FT-LB. 34RAA37AX3

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco Nutsetter,35RNAL-10M-3

Cleco Nutsetter,35RNAL-10M-3

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco Pistol Grip Screwdriver, 15-95 IN-LB 88RSAPT-7CQ

Cleco Pistol Grip Screwdriver, 15-95 IN-LB 88RSAPT-7CQ

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco Pneumatic Nutrunner Air Ratchet 5BRNAL-1043H-3

Cleco Pneumatic Nutrunner Air Ratchet 5BRNAL-1043H-3

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco Pneumatic Nutrunner,.8-8.1 FT-LB. 5RNAL174H-3

Cleco Pneumatic Nutrunner,.8-8.1 FT-LB. 5RNAL174H-3

  • Glassboro, New Jersey, United States
  • Jan 30th
Cleco, Stall Bar Nutrunner 10-16 FT-LB. 45RNAB-6-3

Cleco, Stall Bar Nutrunner 10-16 FT-LB. 45RNAB-6-3

  • Glassboro, New Jersey, United States
  • Jan 30th

People who viewed this item also vieved

Deluxe Hand Stapler, 20-Sheet Capacity, Black

Deluxe Hand Stapler, 20-Sheet Capacity, Black

  • Port Richey, Florida, United States
  • Mar 4th
EZ Squeeze Desktop Stapler, 50-Sheet Capacity, Black

EZ Squeeze Desktop Stapler, 50-Sheet Capacity, Black

  • Port Richey, Florida, United States
  • Mar 4th
Desktop EcoStapler, 20-Sheet Capacity, Sand

Desktop EcoStapler, 20-Sheet Capacity, Sand

  • Port Richey, Florida, United States
  • Mar 4th
NEW! Sioux Pistol Grip Screwdriver Model SSD10P20PS

NEW! Sioux Pistol Grip Screwdriver Model SSD10P20PS

  • Glendale, Arizona, United States
  • Mar 10th
Brand New Cleco Pulse Shut-off Nutsetter

Brand New Cleco Pulse Shut-off Nutsetter

  • Compton, California, United States
  • Mar 10th
Cleco Pneumatic Motor (125GL230)

Cleco Pneumatic Motor (125GL230)

  • Fort Worth, Texas, United States
  • Mar 10th
Glasfloss Industries ABP16253M132PK Z-Line Series 300 AB MERV 13 Air Cleaner Rep

Glasfloss Industries ABP16253M132PK Z-Line Series 300 AB MERV 13 Air Cleaner Rep

  • United States
  • Mar 29th
Freeman BN18-2 2-Inch by 18 Gauge Brad Nail 1000 Per Box

Freeman BN18-2 2-Inch by 18 Gauge Brad Nail 1000 Per Box

  • United States
  • Mar 29th
Dixon SV20 Steel Air Hose Fitting In-Line Swivel 1/2" NPT Male x 1/2" NPT Fema

Dixon SV20 Steel Air Hose Fitting In-Line Swivel 1/2" NPT Male x 1/2" NPT Fema

  • United States
  • Mar 29th
RIDGID 2-1/8 in. Brad Nailer, Powerful Motor, Hex Grip, Dry-Fire Lockout,R213BNE

RIDGID 2-1/8 in. Brad Nailer, Powerful Motor, Hex Grip, Dry-Fire Lockout,R213BNE

  • Tallahassee, Florida, United States
  • May 25th
Bostitch BT1855 Brad Nailer 18Ga 5/8" - 2-1/8" Fastener Range Used

Bostitch BT1855 Brad Nailer 18Ga 5/8" - 2-1/8" Fastener Range Used

  • Burnaby, BC, Canada
  • May 25th
Central Pneumatic Air Nailer With Case

Central Pneumatic Air Nailer With Case

  • Grandville, Michigan, United States
  • May 25th
Air Capital Tools 90 Degree Drill 3000 RPM Aircraft Aviation Tool USA

Air Capital Tools 90 Degree Drill 3000 RPM Aircraft Aviation Tool USA

  • Mannford, Oklahoma, United States
  • May 25th
Chicago Pneumatic 2310-P-46 1/4" Industrial Pistol Grip Air Drill

Chicago Pneumatic 2310-P-46 1/4" Industrial Pistol Grip Air Drill

  • Long Beach, California, United States
  • May 25th
D9 Dotco 5/16-20 Right Angle Drill 15LN281-52 0.9HP Heavy Duty Head 3500 RPM

D9 Dotco 5/16-20 Right Angle Drill 15LN281-52 0.9HP Heavy Duty Head 3500 RPM

  • Crystal River, Florida, United States
  • May 25th
Ernst Manufacturing 6015M-Black 40-Tool Space Saver Wrench Rail Kit with

Ernst Manufacturing 6015M-Black 40-Tool Space Saver Wrench Rail Kit with

  • USA, United States
  • May 25th
Aircat 3/8" Drive Air Impact Wrench

Aircat 3/8" Drive Air Impact Wrench

  • Boaz, Alabama, United States
  • May 26th
Ingersoll Rand Model 294 Pneumatic 1-inch Impact Wrench

Ingersoll Rand Model 294 Pneumatic 1-inch Impact Wrench

  • Hesperia, California, United States
  • May 26th
3 Pc Set Collar Removel Socket

3 Pc Set Collar Removel Socket

  • Siler City, North Carolina, United States
  • May 28th
Bucking bars 16 various of sizes

Bucking bars 16 various of sizes

  • Wichita, Kansas, United States
  • May 28th
Sioux Rivet Gun 4x

Sioux Rivet Gun 4x

  • Mobile, Alabama, United States
  • May 28th
INGERSOLL RAND Td250 CYCLONE AIR DIE GRINDER 25,000 RPM

INGERSOLL RAND Td250 CYCLONE AIR DIE GRINDER 25,000 RPM

  • Apple Grove, West Virginia, United States
  • May 29th
Henry tools 65vbw air saw

Henry tools 65vbw air saw

  • Oakboro, North Carolina, United States
  • May 29th
Grinder-TC Service/Henry Tool Pencil Grinder

Grinder-TC Service/Henry Tool Pencil Grinder

  • Oakboro, North Carolina, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies