US $30.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Well used. Some surface rust pitting on holder. A chip on the flange and many nicks and dings on shank. Knob on shank was cut off / removed. See picture for details.” |
Directions
Similar products from Adapters & Arbor Tool Holders
NMTB #30 Taper To Jacob JT3 Arbor
Morse Taper Adapter 6 MT Shank to 5 MT Socket 9" OAL
Robb-Jack AB-1250 Precision Stub Arbor
Morse Taper Adapter 5 MT Shank to 4 MT Socket 6-1/2" OAL
Lathe Dead Center Carbide Tipped 4 MT 5-1/2" OAL
MILLING MACHINE ARBOR ADAPTER BENDIX SCULLY-JONES 18128 2 M.T. #9875
Kennametal / Erickson HSK100A Shell Mill Arbors - HSK100ASMC40160M
Sunnen PG-250 Gage Extension Fingers Large Extension Set 2.25" to 3.00"
Ball Driver / Drive Adapter, 5/8" x .390, Peterson Seat and Guide, Kwik Way
Straight Shank Drive Adapter, 9/16" x .375, Serdi Seat and Guide Machine
U.S.A.! KEARNEY & TRECKER 50 TAPER SHANK #5 B&S ADAPTER SLEEVE TOOL HOLDER
U.S.A.! KEARNEY & TRECKER 50 TAPER SHANK #4 MORSE ADAPTER SLEEVE TOOL HOLDER
U.S.A.! KEARNEY & TRECKER 50 TAPER SHANK #3 MORSE ADAPTER SLEEVE TOOL HOLDER
Shell / Mill Arbor Screw / Bolt 3/4"-16 Thread
5/16 INCH R8 END MILL HOLDER-PRO SERIES (3901-0103)
Morse Taper MT3 End Mill Holder 3/8”
NMTB 40 Taper (#40) End Mill Holder/Adapter 5/16 "-New
MT3 to J3 German Made Drill Chuck Arbor
People who viewed this item also vieved
BENDIX X Press Change Collet Holder 95073 w/1/8" Collet Loc: M 4
PARLEC (?) CAT40 1/2" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12390
Kaiser Boring head 310.401 Ewn41xck4b
SANDVIK Coroturn 107 A10R-SVUBR 2-EB1 8" X 5/8" Boring Bar Loc: J 2-3
6 Indexable Inserts Carbide VC-3
4 Fine Indexable Inserts Carbide TNMA 323C Grade C2
New J Style Tool Holder Bushing 1 1/2" O.D. ,7/8" I.D. ***GREAT PRICE***
SOUTH BEND 9" 10K METAL LATHE IDLER CHANGE GEAR BOLT BUSHING ASSY
Lot of Four NIkken BT40 Tool Holders 3/8 Inch (Inv.35588)
Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)
300 Pc Indexable Carbide Hardware Wedges Screws Kennametal Carboloy Valenite
New VARI-SET EBN-2A Carbide inserts Indexable Valenite Boring HEAD Bar Bit 12T4
No.2 Modern Magic Quick Chuck for 1 1/4" OD Collets 4MT MORSE TAPER Shank
MACHINIST TOOL LATHE MILL Machinist Aloris CXA Quick Change Tool Holder for Post
GERMANY ROHM KEYLESS DRILL CHUCK 0-1/4
Drill Chucks Lathe Jacobs, Snap-On, Almond
Sunnen Complete Mandrel AK20-931 : S931 Sleeve, AK20-A Adapter, UC-B Shoe, Stone
Sunnen Complete Mandrel AK20-806 : S806 Sleeve, AK20-A Adapter, UB-B Shoe, Stone
Nema 34 2phase 8.5N.m 1204ozf.in stepperMotor 86mm frame 12.7mm 86J18118-842
Nema 34 2phase 6.0N.m 850ozf.in stepperMotor 86mm frame12.7mm shaft 86J18101-450
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies