+ Post new Ad
Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Ro, US $5700 – Picture 0
Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Ro, US $5700 – Picture 0

Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type Zsk 25 P8.2 E-pula. Co-ro

US $5700

  • Bensenville, Illinois, United States
  • Jun 14th
Open on mobile:
QR code
Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Ro Click To Enlarge Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Rotating intermeshing side by side screw design. 3 Barrel sections, (1) feed section with hopper, electrically heated, water cooled (no system). Approximate 44" center line height. Driven by a 6kw (8 hp), 440 volt, 2210 rpm DC motor, thru a type gearbox. Includes an approximate 1-1/2" wide slotted die, control panel with a AEG Minisemi drive. MFG 1990. ref #: 43489001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Mixaco Maschinenbau High Intensity Mixer, Type SM 300, 304 Stainless Steel

Used- Mixaco Maschinenbau High Intensity Mixer, Type SM 300, 304 Stainless Steel

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Allied Die 32 Wide Flex Lip Sheet Die. 1" Back center feed. 1/460 Volt.

Used- Allied Die 32 Wide Flex Lip Sheet Die. 1" Back center feed. 1/460 Volt.

  • Bensenville, Illinois, United States
  • Jun 14th
Used- U.S. Extrusion 30mm Twin Screw Side Feeder. (2) 30mm diameter x 14" long c

Used- U.S. Extrusion 30mm Twin Screw Side Feeder. (2) 30mm diameter x 14" long c

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Whitlock Vacuum Loading System Consisting Of: (1) Whilock horizontal rotar

Used- Whitlock Vacuum Loading System Consisting Of: (1) Whilock horizontal rotar

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Berstorff 140mm Single Screw Extruder. Approximate 18 to 1 L/D ratio. Oil

Used- Berstorff 140mm Single Screw Extruder. Approximate 18 to 1 L/D ratio. Oil

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Battenfeld Gloucester Nip Roll Stand. (2) 10" Diameter x 108" long pneumat

Used- Battenfeld Gloucester Nip Roll Stand. (2) 10" Diameter x 108" long pneumat

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1200 B2. Ap

Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1200 B2. Ap

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Agitated Hopper/Feeder, Carbon Steel. Approximate 58" diameter x 17" strai

Used- Agitated Hopper/Feeder, Carbon Steel. Approximate 58" diameter x 17" strai

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Cumberland Granulator, Model 10X12, Carbon Steel. Approximate 10" x 12" fe

Used- Cumberland Granulator, Model 10X12, Carbon Steel. Approximate 10" x 12" fe

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Shick Push Pull Railcar Unloding System. Includes a 40hp blower, and Premi

Used- Shick Push Pull Railcar Unloding System. Includes a 40hp blower, and Premi

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Brown Horizontal Mechanical Trim Press. Dual fly wheel drive, 43” x 12.5”

Used- Brown Horizontal Mechanical Trim Press. Dual fly wheel drive, 43” x 12.5”

  • Bensenville, Illinois, United States
  • Jun 14th
Z-PCABS Ivory 3D Printing Filament – 800g Spool

Z-PCABS Ivory 3D Printing Filament – 800g Spool

  • San Clemente, California, United States
  • Jun 14th
Cumberland 14" Pelletizer 24 Knife Rotor

Cumberland 14" Pelletizer 24 Knife Rotor

  • Gardner, Massachusetts, United States
  • Jun 14th
SIBE AUTOMATION VACUUM FORMING MACHINE 60"x84" TWO STATION DUAL HEAT DUAL PLATEN

SIBE AUTOMATION VACUUM FORMING MACHINE 60"x84" TWO STATION DUAL HEAT DUAL PLATEN

  • Ocala, Florida, United States
  • Jun 14th
SIBE AUTOMATION VACUUM FORMING MACHINE 48"X48" THERMOFORMING DUAL HEAT 2 PLATEN

SIBE AUTOMATION VACUUM FORMING MACHINE 48"X48" THERMOFORMING DUAL HEAT 2 PLATEN

  • Ocala, Florida, United States
  • Jun 14th
Bunting Magnetics FF4400-PLS Drawer Magnet Injection Molding

Bunting Magnetics FF4400-PLS Drawer Magnet Injection Molding

  • Valley View, Pennsylvania, United States
  • Jun 14th
Used- Killion 1.5" Single Screw Extruder, Model KN-150. Approximate 24 to 1 L/D

Used- Killion 1.5" Single Screw Extruder, Model KN-150. Approximate 24 to 1 L/D

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Nelmor Granulator, Model G1620 M1. Approximately 16" x 20" feed throat, 3

Used- Nelmor Granulator, Model G1620 M1. Approximately 16" x 20" feed throat, 3

  • Bensenville, Illinois, United States
  • Jun 14th
Used- LR Systems Filtered Receiver, Model PRCF104-3, 301 Stainless Steel. Housin

Used- LR Systems Filtered Receiver, Model PRCF104-3, 301 Stainless Steel. Housin

  • Bensenville, Illinois, United States
  • Jun 14th
Used- EDI 44" Wide Ultraflex H75 Flex Lip Sheet Die. Back center feed, fixed bot

Used- EDI 44" Wide Ultraflex H75 Flex Lip Sheet Die. Back center feed, fixed bot

  • Bensenville, Illinois, United States
  • Jun 14th

People who viewed this item also vieved

Drawer Magnet Inlet: 2 1/2", Outlet: 2" #58218

Drawer Magnet Inlet: 2 1/2", Outlet: 2" #58218

  • Holly, Michigan, United States
  • Jan 30th
Netstal Sycap Graphtrack Frontpanel 110.240.9366 DiskJet Injection Molder

Netstal Sycap Graphtrack Frontpanel 110.240.9366 DiskJet Injection Molder

  • Ventura, California, United States
  • Jan 30th
GEFRAN CAVI TR1B-S-3-8G-100-M1-1C-4-G3 Thermocouple

GEFRAN CAVI TR1B-S-3-8G-100-M1-1C-4-G3 Thermocouple

  • Wilmington, Ohio, United States
  • Jan 30th
GEFRAN SENSORI TC0000000046003 Thermometer 4" Rod NEW

GEFRAN SENSORI TC0000000046003 Thermometer 4" Rod NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Big Chief BC32840C Band Heater 300W 240V 1-1/2" ID 1-1/2" Long NEW

Big Chief BC32840C Band Heater 300W 240V 1-1/2" ID 1-1/2" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies