+ Post new Ad
V Blocks - Various Lot Set, US $150 – Picture 0
V Blocks - Various Lot Set, US $150 – Picture 0

V Blocks - Various Lot Set

US $150

  • New Point, Indiana, United States
  • Nov 8th
Open on mobile:
QR code
Various collection lot of - V Blocks AS IS The rust on here should clean up pretty good-if you take the time. It is not ate into steel as much as picture shows. But as is...

Directions

Similar products from Supporting Blocks & Sets

MACHINIST TOOLS LATHE MILL Machinist 2 Nice V Blocks and Clamps for Set Up

MACHINIST TOOLS LATHE MILL Machinist 2 Nice V Blocks and Clamps for Set Up

  • Morris Plains, New Jersey, United States
  • Nov 10th
Grizzly T23889 V-Block Set With Clamp-Double Slot

Grizzly T23889 V-Block Set With Clamp-Double Slot

  • USA
  • Nov 10th
Machinist " V " Block Clamp only - No Block included 2-3/4" wide by 1-3/4" Tall

Machinist " V " Block Clamp only - No Block included 2-3/4" wide by 1-3/4" Tall

  • SoCal, United States
  • Nov 10th
Anytime Tools 8 Pc V-BLOCK and CLAMP DOUBLE SIDED 90° MACHINIST TOOL

Anytime Tools 8 Pc V-BLOCK and CLAMP DOUBLE SIDED 90° MACHINIST TOOL

  • USA
  • Nov 10th
Grizzly H5608 V-Block Pair With Clamps 1-5/8-Inch

Grizzly H5608 V-Block Pair With Clamps 1-5/8-Inch

  • USA
  • Nov 10th
Machinist Work Holding Set Up V Block 6 7/8 x 1 3/4 x 1 3/4

Machinist Work Holding Set Up V Block 6 7/8 x 1 3/4 x 1 3/4

  • Canton, Massachusetts, United States
  • Nov 10th
One Pair of Matched V Blocks 3" x 2 3/4"

One Pair of Matched V Blocks 3" x 2 3/4"

  • Waynesville, Ohio, United States
  • Nov 10th
++ BROWN AND SHARPE V BLOCK MODEL 750- B / 750B LOT OF TWO (B)

++ BROWN AND SHARPE V BLOCK MODEL 750- B / 750B LOT OF TWO (B)

  • Bosque Farms, New Mexico, United States
  • Nov 10th
++ BROWN AND SHARPE V BLOCK MODEL 750- B / 750B LOT OF TWO (A)

++ BROWN AND SHARPE V BLOCK MODEL 750- B / 750B LOT OF TWO (A)

  • Bosque Farms, New Mexico, United States
  • Nov 10th
Starrett 271C V-Blocks and Clamp Set

Starrett 271C V-Blocks and Clamp Set

  • Colorado Springs, Colorado, United States
  • Nov 8th
MACHINIST TOOLS LATHE MILL Machinist Lot of 2 Nice Ground Parallel Block s

MACHINIST TOOLS LATHE MILL Machinist Lot of 2 Nice Ground Parallel Block s

  • Morris Plains, New Jersey, United States
  • Nov 8th
MACHINIST TOOLS LATHE MILL Machinist Lot of Mandrels Mandrells

MACHINIST TOOLS LATHE MILL Machinist Lot of Mandrels Mandrells

  • Morris Plains, New Jersey, United States
  • Nov 8th
MACHINIST TOOL LATHE MILL Toolmakers Adjustable Set Up Block

MACHINIST TOOL LATHE MILL Toolmakers Adjustable Set Up Block

  • Batavia, Illinois, United States
  • Nov 8th
Anton Magnetic Transfer Blocks 45 lb Bulk Lot

Anton Magnetic Transfer Blocks 45 lb Bulk Lot

  • Lynbrook, New York, United States
  • Nov 8th
Starrett V Block & Clamps

Starrett V Block & Clamps

  • Paris, Ohio, United States
  • Nov 8th
BENCH MICROMETER PRECISION GAGE FIXTURE 20" X 2" MITUTOYO INDICATORS V BLOCKS

BENCH MICROMETER PRECISION GAGE FIXTURE 20" X 2" MITUTOYO INDICATORS V BLOCKS

  • Naperville, Illinois, United States
  • Nov 7th
BENCH MICROMETER PRECISION GAGE FIXTURE 8" X 2" BRYANT INDICATORS V BLOCKS

BENCH MICROMETER PRECISION GAGE FIXTURE 8" X 2" BRYANT INDICATORS V BLOCKS

  • Naperville, Illinois, United States
  • Nov 7th
BENCH MICROMETER PRECISION GAGE FIXTURE 8" X 2" FEDERAL INDICATORS V BLOCKS

BENCH MICROMETER PRECISION GAGE FIXTURE 8" X 2" FEDERAL INDICATORS V BLOCKS

  • Naperville, Illinois, United States
  • Nov 7th
BENCH MICROMETER PRECISION GAGE FIXTURE 20" X 2" FEDERAL INDICATORS V BLOCKS

BENCH MICROMETER PRECISION GAGE FIXTURE 20" X 2" FEDERAL INDICATORS V BLOCKS

  • Naperville, Illinois, United States
  • Nov 7th
BENCH MICROMETER PRECISION GAGE FIXTURE 12" X 3" MITUTOYO INDICATORS V BLOCKS

BENCH MICROMETER PRECISION GAGE FIXTURE 12" X 3" MITUTOYO INDICATORS V BLOCKS

  • Naperville, Illinois, United States
  • Nov 7th

People who viewed this item also vieved

Riten Interchangeable Live Point centers New Live Center MT# 5 USA 49505

Riten Interchangeable Live Point centers New Live Center MT# 5 USA 49505

  • Carrollton, Ohio, United States
  • Jan 30th
Riten Live Tracer Point centers New Live Center MT #5 USA 44905

Riten Live Tracer Point centers New Live Center MT #5 USA 44905

  • Carrollton, Ohio, United States
  • Jan 30th
USED CARBIDE TIPPED #14 JARNO LATHE DEAD CENTER (1.751" Point Diameter)

USED CARBIDE TIPPED #14 JARNO LATHE DEAD CENTER (1.751" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
TONGUE AND GROOVE T&G CHUCK JAWS , 3 SETS

TONGUE AND GROOVE T&G CHUCK JAWS , 3 SETS

  • Unionville, Connecticut, United States
  • Jan 30th
12" INTEGRAL HYDRAULIC CHUCK LOGANSPORT S59478-GG

12" INTEGRAL HYDRAULIC CHUCK LOGANSPORT S59478-GG

  • Roanoke, Virginia, United States
  • Jan 30th
JACOBS LATHE SPINDLE NOSE COLLET CHUCK D1-6 MOUNT WITH COLLETS

JACOBS LATHE SPINDLE NOSE COLLET CHUCK D1-6 MOUNT WITH COLLETS

  • Wadley, Alabama, United States
  • Jan 30th
M6 X 45MM TOGGLE CLAMP SPINDLE ASSEMBLY (3900-0351)

M6 X 45MM TOGGLE CLAMP SPINDLE ASSEMBLY (3900-0351)

  • Chino, California, United States
  • Jan 30th
STYLE # 101-E VERTICAL U-BAR TOGGLE CLAMP WITH FLANGED BASE (3900-0335)

STYLE # 101-E VERTICAL U-BAR TOGGLE CLAMP WITH FLANGED BASE (3900-0335)

  • Chino, California, United States
  • Jan 30th
VERTICAL FLANGED BASE U-BAR TOGGLE CLAMP 220 LBS HOLDING PRESSURE (3900-0336)

VERTICAL FLANGED BASE U-BAR TOGGLE CLAMP 220 LBS HOLDING PRESSURE (3900-0336)

  • Chino, California, United States
  • Jan 30th
Tapping Collet / Chuck 3/4 ” OD x 0272” ID

Tapping Collet / Chuck 3/4 ” OD x 0272” ID

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Tapping Collet 2 pcs .510” OD x .232” ID

Tapping Collet 2 pcs .510” OD x .232” ID

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Tapping Collet 6 pcs.

Tapping Collet 6 pcs.

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
(5) 5C COLLETS - SIZE RANGES - 17/32" TO 59/64"

(5) 5C COLLETS - SIZE RANGES - 17/32" TO 59/64"

  • Chino, California, United States
  • Jan 30th
(5) 5C COLLETS - SIZE RANGES - 3/32" TO 1/4"

(5) 5C COLLETS - SIZE RANGES - 3/32" TO 1/4"

  • Chino, California, United States
  • Jan 30th
Hardinge 1''Gridley Fd FGR Hex Sm 5/8 8369

Hardinge 1''Gridley Fd FGR Hex Sm 5/8 8369

  • Mission Viejo, California, United States
  • Jan 30th
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW!,USA!

Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW!,USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Angle 1/2” x1/2” x 24 in,1/16 in thick, .5 IN, Angles, New, USA!

Aluminum Angle 1/2” x1/2” x 24 in,1/16 in thick, .5 IN, Angles, New, USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
H/V 5C ANGLE COLLET FIXTURE (4-1/4 INCH H)

H/V 5C ANGLE COLLET FIXTURE (4-1/4 INCH H)

  • Chino, California, United States
  • Jan 30th
TAFT-PEIRCE MAGNETIC TOOLMAKER'S KNEE 6.5" X 4.25" ANGLE PLATE CHUCK PICTURES

TAFT-PEIRCE MAGNETIC TOOLMAKER'S KNEE 6.5" X 4.25" ANGLE PLATE CHUCK PICTURES

  • Las Vegas, Nevada, United States
  • Jan 30th
TAFT-PEIRCE MAGNETIC TOOLMAKER'S KNEE 6.5" X 4.25" ANGLE PLATE CHUCK

TAFT-PEIRCE MAGNETIC TOOLMAKER'S KNEE 6.5" X 4.25" ANGLE PLATE CHUCK

  • Las Vegas, Nevada, United States
  • Jan 30th
TE-CO 50 Piece Deluxe Clamping Set Style:Standard STUD SIZE:1/2"-13 T-Slot:5/8"

TE-CO 50 Piece Deluxe Clamping Set Style:Standard STUD SIZE:1/2"-13 T-Slot:5/8"

  • Flushing, New York, United States
  • Jan 30th
SMW Rotary Table Worm Shaft. P/N: 51320006 / For Model RT375VN New

SMW Rotary Table Worm Shaft. P/N: 51320006 / For Model RT375VN New

  • Keller, Texas, United States
  • Jan 30th
72" x 156" Cross Sliding Rotary Table

72" x 156" Cross Sliding Rotary Table

  • Helena, Alabama, United States
  • Jan 30th
33" KITCHEN & WALKER SQUARE ROTARY UNIVERSAL TILTING TABLE

33" KITCHEN & WALKER SQUARE ROTARY UNIVERSAL TILTING TABLE

  • Helena, Alabama, United States
  • Jan 30th
KURT 6" VISE D60 ANGLOCK D-SERIES "Made in U.S.A."

KURT 6" VISE D60 ANGLOCK D-SERIES "Made in U.S.A."

  • Edison, New Jersey, United States
  • Jan 30th
Kurt Minilock MT4 1/4-20

Kurt Minilock MT4 1/4-20

  • North Kingstown, Rhode Island, United States
  • Jan 30th
Chas Parker 974B Bench Vise (Inv.32013)

Chas Parker 974B Bench Vise (Inv.32013)

  • Portland, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies