+ Post new Ad
VEKTEK 14-6113-01-R SWING CLAMP TUFFCAM TF, US $73 – Picture 0
VEKTEK 14-6113-01-R SWING CLAMP TUFFCAM TF, US $73 – Picture 0

Vektek 14-6113-01-r Swing Clamp Tuffcam Tf

US $73

  • Story City, Iowa, United States
  • Jun 3rd
Open on mobile:
QR code
For sale is a Vektek 14-6113-01-R swing clamp. Fully function, sold as shown. Everything in the pictures is included upon purchase. The button head cap screw is screwed very snug. Please contact us through eBay messaging if you have any questions about the listed items, thanks!

Directions

Similar products from Clips & Jaws

Sumner Ultra Fit 2"-6" Internal Fit Up CLAMP

Sumner Ultra Fit 2"-6" Internal Fit Up CLAMP

  • Anaheim, California, United States
  • Jun 4th
13 pc Lot Mill Milling Hold Down Clamps Edge Clamp & Step Blocks for 5/8" Studs

13 pc Lot Mill Milling Hold Down Clamps Edge Clamp & Step Blocks for 5/8" Studs

  • Lorain, Ohio, United States
  • Jun 4th
Northwestern Tools 20pc. Aluminum Step Blocks #517

Northwestern Tools 20pc. Aluminum Step Blocks #517

  • Roanoke, Virginia, United States
  • Jun 4th
Vintage L.S.Starrett 2 1/4" Toolmakers Parallel Clamp No.161-C

Vintage L.S.Starrett 2 1/4" Toolmakers Parallel Clamp No.161-C

  • Little Falls, New Jersey, United States
  • Jun 4th
Lot of Assorted Brown & Sharpe & Starrett Parallel clamps Parts NO RESERVE!

Lot of Assorted Brown & Sharpe & Starrett Parallel clamps Parts NO RESERVE!

  • Edison, New Jersey, United States
  • Jun 3rd
Workshop/Garage Equipment Vertical Hold-Down Action Clamp With Neoprene Handle

Workshop/Garage Equipment Vertical Hold-Down Action Clamp With Neoprene Handle

  • US, United States
  • Jun 3rd
Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

  • Venice, Florida, United States
  • Jun 3rd
Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Teco T-nut & Stud kit 3/8-16 stud , 9/16 table t- slot size

Teco T-nut & Stud kit 3/8-16 stud , 9/16 table t- slot size

  • National City, California, United States
  • Jun 3rd
Lot of 3 VEKTEK 14-6113-01-R SWING CLAMP TUFFCAM TF

Lot of 3 VEKTEK 14-6113-01-R SWING CLAMP TUFFCAM TF

  • Story City, Iowa, United States
  • Jun 3rd
VEKTEK 14-6113-01-L SWING CLAMP TUFFCAM TF

VEKTEK 14-6113-01-L SWING CLAMP TUFFCAM TF

  • Story City, Iowa, United States
  • Jun 3rd
Hytec Swing Clamp 750LB S/A S Low Flange 110058 NEW

Hytec Swing Clamp 750LB S/A S Low Flange 110058 NEW

  • Story City, Iowa, United States
  • Jun 3rd
NEW 110058 Hytec Swing Clamp 750LB S/A S Low Flange comes with No. 9614 manifold

NEW 110058 Hytec Swing Clamp 750LB S/A S Low Flange comes with No. 9614 manifold

  • Story City, Iowa, United States
  • Jun 3rd
DESTACO POWER CLAMP MOD.802

DESTACO POWER CLAMP MOD.802

  • Hudson, Ohio, United States
  • Jun 3rd
Veritas Hold-Down hold-fast

Veritas Hold-Down hold-fast

  • Lodi, California, United States
  • Jun 3rd
MINERALLAC 600M BEAM CLAMP FLANGES 1/4"-20 TAPPED HOLES (BOX OF 50)

MINERALLAC 600M BEAM CLAMP FLANGES 1/4"-20 TAPPED HOLES (BOX OF 50)

  • Redlands, California, United States
  • Jun 3rd
pair of vintage L.S.Starrett parallel clamps 161-B

pair of vintage L.S.Starrett parallel clamps 161-B

  • Warren, Pennsylvania, United States
  • Jun 3rd
# 68205 Teco T-nut & Stud kit 12 mm stud size , 16 mm" table t- slot size

# 68205 Teco T-nut & Stud kit 12 mm stud size , 16 mm" table t- slot size

  • National City, California, United States
  • Jun 3rd
(25-pcs for 65.00) #47010 T-Nuts 5/8 Stud / 13/16 T-Slot size Northwestern

(25-pcs for 65.00) #47010 T-Nuts 5/8 Stud / 13/16 T-Slot size Northwestern

  • National City, California, United States
  • Jun 3rd

People who viewed this item also vieved

LATHE CENTER DEAD STYLE #5MORSE TAPER HIGH SPEED STEEL OAL=9-1/4" NEW USA 48.00

LATHE CENTER DEAD STYLE #5MORSE TAPER HIGH SPEED STEEL OAL=9-1/4" NEW USA 48.00

  • North Tonawanda, New York, United States
  • Jan 30th
USED J&S TOOL CO. #14 JARNO LIVE LATHE CENTER MODEL# CP-20 (1.00"Point Diameter)

USED J&S TOOL CO. #14 JARNO LIVE LATHE CENTER MODEL# CP-20 (1.00"Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
MT 2 (Morse Taper 2) Bull Nose Live Center-New

MT 2 (Morse Taper 2) Bull Nose Live Center-New

  • Chino, California, United States
  • Jan 30th
R8 Round Collet - SIZE: 19.0mm

R8 Round Collet - SIZE: 19.0mm

  • United States
  • Jan 30th
1X2 INCH ER-32 Straight Shank Collet Chcuk-NEW

1X2 INCH ER-32 Straight Shank Collet Chcuk-NEW

  • Chino, California, United States
  • Jan 30th
SET OF (3) 7-3/4" ALUMINUM PIE JAWS FOR LATHE CHUCK #RKT-8300A

SET OF (3) 7-3/4" ALUMINUM PIE JAWS FOR LATHE CHUCK #RKT-8300A

  • Chino, California, United States
  • Jan 30th
Schaublin W20 Collet 13.3mm W-20 102 Lathe

Schaublin W20 Collet 13.3mm W-20 102 Lathe

  • Millstone Township, New Jersey, United States
  • Jan 30th
Schaublin W20 Square Collet 1/8" W-20 102 Lathe

Schaublin W20 Square Collet 1/8" W-20 102 Lathe

  • Millstone Township, New Jersey, United States
  • Jan 30th
Schaublin W20 Collet 9.5 MM W-20 102 Lathe

Schaublin W20 Collet 9.5 MM W-20 102 Lathe

  • Millstone Township, New Jersey, United States
  • Jan 30th
Used Toolmex 8" Back Plate Adapter For 8" Chuck

Used Toolmex 8" Back Plate Adapter For 8" Chuck

  • Albertville, Minnesota, United States
  • Jan 30th
Old Stock Toolmex/Bison 7-873-085 Backplate Adapter 8212-8.1/4"-5C

Old Stock Toolmex/Bison 7-873-085 Backplate Adapter 8212-8.1/4"-5C

  • Albertville, Minnesota, United States
  • Jan 30th
GEWISS GW44627 BACK-MOUNTING PLATE FOR BOXES 300X220MM

GEWISS GW44627 BACK-MOUNTING PLATE FOR BOXES 300X220MM

  • Fremont, California, United States
  • Jan 30th
Peterson Tool Co. 5050 1632 CHG A Anvil

Peterson Tool Co. 5050 1632 CHG A Anvil

  • Peoria, Illinois, United States
  • Jan 30th
Peterson Tool Co. 5050-1142 CHG A PTC Anvil

Peterson Tool Co. 5050-1142 CHG A PTC Anvil

  • Peoria, Illinois, United States
  • Jan 30th
National Acme NAMCO 1-1/4" 7811 Grid Machine Pusher

National Acme NAMCO 1-1/4" 7811 Grid Machine Pusher

  • Peoria, Illinois, United States
  • Jan 30th
TROYKE ROTARY TABLE 15"

TROYKE ROTARY TABLE 15"

  • Burnsville, North Carolina, United States
  • Jan 30th
HAAS 4th AXIS 5C 7 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C

HAAS 4th AXIS 5C 7 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C

  • Santa Clarita, California, United States
  • Jan 30th
HEAVY DUTY SWIVEL BASE FOR MILLING MACHINE VICE KURT TYPE

HEAVY DUTY SWIVEL BASE FOR MILLING MACHINE VICE KURT TYPE

  • Ellington, New York, United States
  • Jan 30th
Reed Utility Vise NO. 24 Machinist Bench Vise & Anvil With 4" Jaw Opening

Reed Utility Vise NO. 24 Machinist Bench Vise & Anvil With 4" Jaw Opening

  • Mishawaka, Indiana, United States
  • Jan 30th
Bridgeport Vise Handle 0.75 Inches MILLING VISE CRANK LATHE HANDLE

Bridgeport Vise Handle 0.75 Inches MILLING VISE CRANK LATHE HANDLE

  • Harwinton, Connecticut, United States
  • Jan 30th
MACHINIST 5C COLLET BLOCK SET- SQUARE, HEX, RINGS & COLLET CLOSER HOLDER

MACHINIST 5C COLLET BLOCK SET- SQUARE, HEX, RINGS & COLLET CLOSER HOLDER

  • Wausau, Wisconsin, United States
  • Feb 13th
Parlec b40-32 er 412 collet chuck

Parlec b40-32 er 412 collet chuck

  • Chandler, Arizona, United States
  • Feb 13th
BISON 12" DIRECT MOUNT / CAMLOCK 3 JAW CHUCK D1-11

BISON 12" DIRECT MOUNT / CAMLOCK 3 JAW CHUCK D1-11

  • Roanoke, Virginia, United States
  • Feb 13th
Vintage Sears Craftsman 8" Cross Slide Rotary Table

Vintage Sears Craftsman 8" Cross Slide Rotary Table

  • Simi Valley, California, United States
  • Feb 13th
Matched Pair of Small Commercially Made in U.S.A. "V" Blocks with Clamps

Matched Pair of Small Commercially Made in U.S.A. "V" Blocks with Clamps

  • Cape Coral, Florida, United States
  • Feb 14th
NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

  • Ellington, New York, United States
  • Feb 15th
SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

  • Ellington, New York, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies