US $10000
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Vertex |
Model | HV-14 |
Directions
Similar products from Rotating Tables
SAGEM KEARFOTT 16" ANGULAR ROTARY TABLE # 77
MECATECNICA DIVIDING HEAD ROTARY TABLE PHVD250
NEW CAMCO FERGUSON FD300F-16-F150-90 ROLLER GEAR INDEX DRIVE
RADIAL DRILL BOX TABLE 18" x 24" x 18"
(2) 42" SUNDSTRAND PALLETS/TABLES - 26016
49.2" FIBROTAKT HYDRAULIC DRIVEN ROTARY TABLE W/POWER X-TRAVEL - #26296
CAMCO 500RPP2H32-3Y32 CAMBOT PARTS HANDLER INDEXING MOTION
CAMCO 300LPP 1.25X10 CAMBOT PARTS HANDLER
12" Tilting Rotary Table Precision Tables NEW
Adj Tailstock For 6-8 " Rotary Tables
Adjustable Tailstock For 12 Inch Rotary Tables
12" Wide x 49.5" High x 18" Deep Matched Pair of Steel Fabricated Angle Plates
Yuasa 5 1/4" diameter spacer, indexer, rotary table
DIVIDING PLATE FOR 8 INCH ROTRAY TABLES
20" precision horizontal rotary table
11" MOORE "Ultra Precise" Horizontal/Vertical Rotary Table
Universal Vice and Tool Company Rotary Table Inv.28854
Adjustable tailstock for 6" rotary tables
People who viewed this item also vieved
5C Square Collets, R8 collets & extras
Machine tool pallet 600mm x 400mm t-slotted
Vimtage D.C. Morrison Tilting Table **Hard To Find!**
18" x 42" 3"Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig
2 NEW 1000LB CARR LANE 650-HTC HORIZONTAL WORK HOLDER MACHINE TOGGLE HAND CLAMPS
Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New
2 LOT USED KANT TWIST 2" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VGC
New Surplus Ajax 6 1/2" ASM 181 Manual Lathe Chuck Jaw Tool Soft Jaws Machining
NEW SET OF 3 RAM PRODUCTS COATED STEEL CHUCK JAWS 454-40 4 3/4" X 1 3/4" X 3 3/4
15" 3 Jaw Scroll Chuck, Made In Sweden, Steel 361994
ATLAS 618 CRAFTSMAN 6" LATHE READY MT1 LIVE CENTER (TANG SHAVED)
ATLAS 10" CRAFTSMAN 12" LATHE 60 DEGREE MT2 DEAD CENTER IN ORIGINAL BOX
ATLAS 618 CRAFTSMAN 6" LATHE IDEAL MT1 LIVE CENTER
VINTAGE CRAFTSMAN TILTING DRILL PRESS VISE, 2-1/2", NO RESERVE!
DRILL PRESS VISE 2-1/4 Inch Jaw Opening Capacity
Massive vintage #74 Armstrong pipe vise
CRANE 2-1/2 CAP *NEW OUT OF BOX*
19-1/2" x 47" Cast Iron Welding / Layout Table, Off Matsuura MC-1000V VMC, (2)
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991 (3)
Machinists Tools: V-Block,1-2-3 Blocks, Machinist Jack and More Mill Lathe
STARRETT V BLOCK & CLAMP No. 278
Starrett No. 568 V Block with 3 bench tools Tapped Holes are 3/8-16. MACHINIST
Spellbinders Shapeabilities Die D-Lites-Time Flies
Cubics Interchangeable Needles-Size 11/8mm
"Teresa Collins Mounted Stamp 3""X3""-London "
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies