Welcome to Country Artifacts, estate asset liquidators. We operate a store, liquidation center and warehouse in Springfield, Vermont. Please feel free to ask any questions you might have by phone at 802-885-6464. We are always looking for ways to improve. If you find a problem with your purchase, please let us know ASAP so we can find the proper solution. We want you to be a happy long-term customer. Vintage General Electric GE 87G71 High Voltage Test Set, 110VAC x 0-3000V Ohmite Product Details: Vintage General Electric GE 87G71 High Voltage Test Set Primary: 110 VAC 50/60 cycles 0-3000 VAC variable output by Ohmite Potentiometer Instructions text on unit: PLACE SWITCH IN "OFF" POSITION WHEN NOT IN USE. RED PILOT LIGHTS SHOW WHEN SWITCH IS ON. ADJUST POTENTIOMETER UNTIL DESIRED VOLTAGE IS INDICATED ON METER BEFORE APPLYING SAFETY CONTACTORS TO APPARATUS UNDER TEST. FAILURE IS INDICATED WHEN METER DROPS TO ZERO. RECOMMENDED FOR USE ON APPARTUS HAVING CAPACITY TO GROUND OF 0.003 MU-F OR LESS. CAUTION: BEFORE OPERATING READ INSTRUCTIONS GEJ-719. My impression is that this set can be used to apply a particular voltage to a piece of equipment by use of the grounding clamp and the probe. I don't know what the amperage would be because I lack the meter to test amperage with. My multimeter let me know that this unit does output voltage though, so I was very limited in my testing in case it puts out lethal amperage. I can say that when the switch goes on, the right hand pilot light comes on (color is clear, not red). The left light didn't come on during my testing. The pot adjusts the output voltage easily, and I turned it up until the pointer started moving off 0.5 KV and my meter indicated AC voltage of 463 VAC with that test, which I imagine is close enough to operational. My meter is a 600 VAC max one, so I didn't go further in my testing, but I expect this set works fine at higher voltages. The instructions say the meter drops to zero upon failure, but I don't know how that works, so I think this thing does more than just apply voltage, and I can't test for that. It seems to be a durable piece of equipment, so I imagine that function is operational or close to working if some minor part needs replacing. I do think a new lamp is needed for the left hand pilot light unless that has something to do with the untested function I was just discussing. I'm selling this item as basically working, but some minor level of maintenance may be needed to make it fully operational. Note that I checked to make sure this unit didn't output voltage when turned off. This test set was originally used by Bryant Chucking Grinder, a machine tool company that was located here in Springfield, Vermont until it closed more than a decade ago. It has been in use at Vermont Machine Tool (who bought Bryant's remaining business) until recently when they closed too, finishing the history of Bryant Grinder after more than a century (1909-2015). The unit itself is stenciled ELECTRICAL. It also came with a tag that says BRYANT STATION CHECKING STUFF WHEELHEAD BENCH. The color is old industrial lime green, and I think looks circa World War Two vintage (I couldn't find any online reference or research material to verify this or to tell me more about it). The tester is useful if you need it's function for your operation, but it also has a great look and would be great for display in your Dr. Frankenstein laboratory (and Steampunk applications). Physically, it has cosmetic wear consistent with its age and use over the years. The cables are in good condition, although they are getting a little stiff with age. The strain relief on the ground clamp is taped, and cracked and fragmented on the probe. The probe has what looks like a trigger, which is taped down (presumably to the on position). Perhaps that trigger is broken, or that's just what the operators wanted. The clamp is clamped to a shop made magnetic tool for quickly attaching to the apparatus to be tested. The power cord has a newer plug on the end. 17" wide x 6" high x 7" extension excluding the cables if mounted on the wall with the controls projecting outward Super nice item. As asset liquidators, we are not considered experts in this product and we are selling it as found. However, if you are unsatisfied with your purchase, we offer a money back guarantee... Money Back Guarantee: If for any reason you are unsatisfied with your purchase, we offer a money back guarantee. This can be a full or partial refund (depending on the severity of the problem). In many cases you may not even need to return it. For fastest service, simply reply to our thank you email, or call us at 802-885-6464. Our hours are 1-6 PM EST Monday-Friday. If we miss your call, please leave a message. We WILL call you back. Package Details: Unpacked weight & size: 33.2, 17x7x7 Packed weight & size: 40, 21x11x11 Package Notes & Ref: 5I22, C12, 44.29 SB Terms & Conditions: Local Pick-up is free, but we must charge 6% Vermont Sales Tax (email for details). Our Standard Shipping method is our choice of USPS, FedEx or Motor Freight. Unless sold as-is, our liability for product defects is limited to the purchase price plus shipping. If sold as-is, we assume no liability. We are not responsible for the installation, training in the use of, or operation of any item we sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product. We welcome international trade. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsiblity. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight (shipping) company, or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as 'gifts' - US and International government regulations prohibit such behavior. All international buyers are responsible for any additional shipping and handling charges, crating costs, and any other costs arising from cross-border trade with us. Unfortunately, because we have very limited space, we cannot store your purchased items for you. We can hold your item for two weeks from the purchase date, after which we have to charge storage, up to $10 per day, depending on the situation. Once storage fees exceed any moneys paid, we will have to relist the item without refund. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
