VT7430-2DRDT IFS 4 CH DIGITAL VIDEO TX / 2 CH DATA TCVR, SM LASER, 1 FIBER, US $1,500.00 – Picture 0

VT7430-2DRDT IFS 4 CH DIGITAL VIDEO TX / 2 CH DATA TCVR, SM LASER, 1 FIBER, US $1,500.00 – Picture 1

Vt7430-2drdt Ifs 4 Ch Digital Video Tx / 2 Ch Data Tcvr, Sm Laser, 1 Fiber

US $1,500.00

Dayton, Ohio, United States
Jan 30th

Open on mobile:
QR code

• 8-Bit Digitally Encoded Video Transmission Transmits 4 Real-Time Color Video Signals and 2 Bi-Directional Data Signals on One Single Mode Optical Fiber• Supports RS-232, RS-422, and 2 or 4-wire RS-485 with Tri-State Data Interfaces• LED Status Indicators Provide Rapid Indication of Critical Operating Parameters• Exceeds All Requirements for RS-250C Medium-Haul Transmission: Extremely High Video Performance• Exceptionally Low Video Distortion with Zero Performance Variation vs. Optical Path Loss• Ideally Suited to Networks Requiring Multiple Physical Layers where Video Degradation May be a Problem• Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems• Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.• Robust Design Ensures Extremely High Reliability In Unconditioned Out-of-Plant Environments Specifications: Video Video Input: 1 volt pk-pk (75 ohms) Input/Ouput Channels: 4 Bandwidth: 10 Hz - 6.5 MHz per channel Differential Gain: <2% Differential Phase: <0.7° Tilt: <1% Signal-to-Noise Ratio (SNR): 60 dB @ Max. Optical Loss Budget Data Data Channel: 2 Data Format: RS-232, RS-422, 2-w or 4-w RS-485 with Tri-State, Manchester, Bi-phase Wavelength 1310/1550 nm, Multimode or Single Mode Optical emitter Laser Diode Number of fibers 1 Connectors Optical: ST, SC or FC (see ordering information) Power: Terminal Block with Screw Clamps Video: BNC (Gold Plated Center-Pin) Electrical & Mechanical Power: 12 VDC @ 500 mA (stand-alone) Number of Rack Slots: 3 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount (Transmitter): 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm Surface Mount (Receiver): 7.0 x 4.9 x 3.0 in., 17.8 x 12.5 x 7.5 cm Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.5 cm

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	GE
Type	CONTROLLER
Model	VT7430-2DRDT
Country/Region of Manufacture	United States