US $40.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Used item. In good condition.” |
Directions
Similar products from Supporting Blocks & Sets
INSPECTION GROUND TOOLMAKER TAPED 4x4x4x.75 BLOCK PRECISION
2 PIECE 2" CAPACITY MACHINISTS V BLOCKS 4" x 1-11/16" x 2-5/8" TALL
PAIR OF 1-3/4" CAPACITY PRECISION V BLOCK SET 3" x 1-1/4" x 2-3/8" TALL
IMPORT 9 Pairs 1/4" x 3/4" - 1-3/4" 55-62 Rc Hardened Precision Parallel Set 1Aa
IMPORT 9 Pairs 1/4" x 3/4" - 1-3/4" 55-62 Rc Hardened Precision Parallel Set 7K
IMPORT 9 Pairs 1/4" x 3/4" - 1-3/4" 55-62 Rc Hardened Precision Parallel Set 8K
IMPORT 9 Pairs 1/4" x 3/4" - 1-3/4" 55-62 Rc Hardened Precision Parallel Set 4K
IMPORT 9 Pairs 1/4" x 3/4" - 1-3/4" 55-62 Rc Hardened Precision Parallel Set 5K
PARTIAL SET OF STEP BLOCKS / FIXTURE CLAMPS
TAFT PEIRGE “V” Block Hardened & Ground with Holddown Bar See USA Pic’s & Desc.
SUBURBAN TOOL 2-1/4" CAPACITY MACHINISTS V BLOCK 4" x 3" x 3"
4.5" x 3" x 3.5" x 11/16" THICK DRILL PRESS MACHINISTS ANGLE PLATE 1/2" SLOTS
3" x 2" x 2-1/2" x 7/16" THICK MACHINIST DRILL PRESS ANGLE SET UP PLATE
3-3/4" x 3-3/4" x 3-3/4" DRILLED & TAPPED DRILL PRESS MACHINIST ANGLE PLATE
4.5" CAPACITY HEAVY DUTY MACHINIST V-BLOCK 8" x 4" x 5.5" TALL
MAGNETIC 1-7/16" CAPACITY MACHINISTS V BLOCK 5-1/4" x 2-3/8" x 2-7/8" TALL
STARRETT 52590 NO.568A V-BLOCK W/O CLAMP
Machinist Right Angle Set Up Block TOOL MAKER MILLING LATHE
STARRETT 52588 NO.567 V-BLOCK W/ CLAMP
98MM (L) X 76MM (W) LARGER V-BLOCK W/ CLAMP (G.P.P. 1941)
People who viewed this item also vieved
ER11 collets 7pcs from 1mm to 7mm for CNC Chuck Milling Lathe
23 Universal Acura flex collet set 1/2 & 3/4 C & C milling machine lathe tools
ER20 collets 13pcs from 1mm to 13mm for CNC milling lathe tool Engraving machine
V-ANGLE STEP PLATE TOOLMAKER PRECISION GROUND INSPECTION 4.25X4.04.0
10-3/4" FACE PLATE FACEPLATE 1-1/2"-10 THREAD MOUNT FOR LATHE SOUTHBEND , LOGAN
VTG. MACHINIST ANGLE BLOCK,SETUP BLOCK , 3"W x 3"H X 4"D
Fixturing Clamp Sets Type: Step Block & Clamp Set Stud Thread Sizes: 1/2-13
JACOBS 11N BALL BEARING SUPER CHUCK 0 - 3/8 Cap. w/2MT NICE! *
JACOBS 14N BALL BEARING SUPER CHUCK 0 - 1/2 Cap. w/2MT NICE! *
JACOBS 18N BALL BEARING SUPER CHUCK 1/8 - 3/4 Cap. w/2MT NICE! *
Carr Lane Air-Powered Clamps 600PPC Brand New in Bag
Sine Bar Vise NICE! machinist diemakers toolmakers tools id.16
ROHM GERMANY! PRESICION BALL BEARING LIVE CENTER W/ 4MT SHANK 108H MK4
NEW UNUSED MT2 WORK ARBOR TOOL HOLDER SOUTH BEND LOGAN ATLAS CRAFTSMAN LATHE
Morse #2 taper centers for South Bend lathe
8" Aluminum Soft Jaws 1.5mm x 60° Serrated for B-208 Type Lathe Chucks (3" HT)
10" Aluminum Soft Jaws 1.5mm x 60° Serrated for B-208 Type Lathe Chucks (3" HT)
Alpha Workholding Solutions EL 600 Magnet Eagle Lift Construction Hand Control
MACHINIST TOOL LATHE MILL Machinist Palmgren ? 3 Axis 8" Rotary Table
Haas Servo Control Brush 17 Pin *Tested Warranty* HA5C HRT 210 310 160
TE-CO TOMBSTONE FIXTURE 16" X 6" X 6"
Royal Products P/N 43366, Cnc Heavy Duty Bar Puller
"Whipper Snapper Cling Stamp 4""X6""-A Kiss For Prince"
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies