+ Post new Ad
Walton 10083 #8, 3 Flute Tap Extractor With Square Shank New, US $180 – Picture 0
Walton 10083 #8, 3 Flute Tap Extractor With Square Shank New, US $180 – Picture 0

Walton 10083 #8, 3 Flute Tap Extractor With Square Shank New

US $180

  • Sherman, Texas, United States
  • Jun 1st
Open on mobile:
QR code
Applications 3 Simple Steps1. Thoroughly remove all chips of the broken tap. Insert the extractor fingers into the flute of the broken tap, pushing them gently but firmly into position.2. Push the holder down until it touches the broken tap. Slide the sleeve down until it touches the work. (Both are important.)3. Apply a tap wrench to the square end of the holder. Twist forward and backward a few times to loosen, then back out the broken tap. Product Specifications Brand WALTON Size #8 No. of Flutes 3 Flute Model # 10083 Series G20 Weight 0.0313 lbs. Country of Origin UNITED STATES OF AMERICA

Directions

Similar products from Dies & Accessories

1/4"x 425' Duct Rodder Fish Tape BLUEROCK Tools Wire Cable Rod Fishtape Puller

1/4"x 425' Duct Rodder Fish Tape BLUEROCK Tools Wire Cable Rod Fishtape Puller

  • Seattle, Washington, United States
  • Jun 2nd
Die nut threading die set of 8. US made 4-40 through 1/2-13. Coarse thread.

Die nut threading die set of 8. US made 4-40 through 1/2-13. Coarse thread.

  • Fort Lauderdale, Florida, United States
  • Jun 2nd
CPS OIL AND DYE INJECTOR INJECTION ASSEMBLY

CPS OIL AND DYE INJECTOR INJECTION ASSEMBLY

  • Folsom, California, United States
  • Jun 2nd
Set of threading dies. 1/4-28 to 1/2-20. GTD made in USA.

Set of threading dies. 1/4-28 to 1/2-20. GTD made in USA.

  • Fort Lauderdale, Florida, United States
  • Jun 2nd
Ridgid 161 Pipe Threader 4" to 6" New Oiler Dies Drive Shaft Cutter Reamer 36630

Ridgid 161 Pipe Threader 4" to 6" New Oiler Dies Drive Shaft Cutter Reamer 36630

  • Midvale, Utah, United States
  • Jun 2nd
Bosch B46024 5/8-11 Hex Die Black Oxide

Bosch B46024 5/8-11 Hex Die Black Oxide

  • USA, United States
  • Jun 1st
Bosch B46026 3/4-10 Hex Die Black Oxide

Bosch B46026 3/4-10 Hex Die Black Oxide

  • USA, United States
  • Jun 1st
Fisch FSF-321279 1/4-Inch High Speed Steel Double Flute Brad Point Drill Bit

Fisch FSF-321279 1/4-Inch High Speed Steel Double Flute Brad Point Drill Bit

  • USA, United States
  • Jun 1st
RIDGID 37880 1" NPT 12-R STAINLESS STEEL PIPE THREADING DIES RH HS 11-R 00-R

RIDGID 37880 1" NPT 12-R STAINLESS STEEL PIPE THREADING DIES RH HS 11-R 00-R

  • Wyandotte, Michigan, United States
  • Jun 1st
1489 Lot(2) Ridgid No. 85 and No. 8 Pipe Extractor Great Cond FREE Ship Cont USA

1489 Lot(2) Ridgid No. 85 and No. 8 Pipe Extractor Great Cond FREE Ship Cont USA

  • Dublin, Texas, United States
  • Jun 1st
PT 44010 Armature fits RIDGID ® 300 535 Pipe Threading Machines 115v Motor

PT 44010 Armature fits RIDGID ® 300 535 Pipe Threading Machines 115v Motor

  • Fort Smith, Arkansas, United States
  • Jun 1st
Pipe Threader Toledo 00 Ratchet Handle & 2 Dies (1/2", 3/4")

Pipe Threader Toledo 00 Ratchet Handle & 2 Dies (1/2", 3/4")

  • Modesto, California, United States
  • Jun 1st
8mm x 850' Duct Rodder Fish Tape Fiberglass Wire Cable Rod Fishtape Puller

8mm x 850' Duct Rodder Fish Tape Fiberglass Wire Cable Rod Fishtape Puller

  • Seattle, Washington, United States
  • Jun 1st
Toledo Beaver 2” Pipe Dies No 12 NOS

Toledo Beaver 2” Pipe Dies No 12 NOS

  • Costa Mesa, California, United States
  • Jun 1st
GTD HS MAINT1" NPT PIPE TAP USA L1408 1-11 1/2 NPT MADE IN USA FREE SHIPPING

GTD HS MAINT1" NPT PIPE TAP USA L1408 1-11 1/2 NPT MADE IN USA FREE SHIPPING

  • San Antonio, Texas, United States
  • Jun 1st
Reed Tool RCR3/4 Round It Straightener/Rerounder, 3/4-Inch

Reed Tool RCR3/4 Round It Straightener/Rerounder, 3/4-Inch

  • USA, United States
  • Jun 1st
RIDGID PIPE THREADER BUCKET AND HAND OILER

RIDGID PIPE THREADER BUCKET AND HAND OILER

  • Plainfield, Indiana, United States
  • Jun 1st
REED #1S PIPE VISE STAND

REED #1S PIPE VISE STAND

  • Plainfield, Indiana, United States
  • Jun 1st
SDT 811A Die Head Diehead fits RIDGID® 300 535 97065 Pipe Threading Threader

SDT 811A Die Head Diehead fits RIDGID® 300 535 97065 Pipe Threading Threader

  • Toledo, Ohio, United States
  • Jun 1st
Gyros 94-01718 T-Handle Ratchet Tap Wrench Number-7-14 Capacity

Gyros 94-01718 T-Handle Ratchet Tap Wrench Number-7-14 Capacity

  • USA, United States
  • Jun 1st

People who viewed this item also vieved

Ridgid 161 Pipe Threader 4-6" Pipe P20 (1555)

Ridgid 161 Pipe Threader 4-6" Pipe P20 (1555)

  • Elkins, New Hampshire, United States
  • Jan 31st
VINTAGE "THE TOLEDO PIPE THREADING MACHINE COMPANY" THREADER 1/8"

VINTAGE "THE TOLEDO PIPE THREADING MACHINE COMPANY" THREADER 1/8"

  • Birdsboro, Pennsylvania, United States
  • Jan 31st
RIDGID 11R 1/4" PIPE THREADER DIE ***XLNT***

RIDGID 11R 1/4" PIPE THREADER DIE ***XLNT***

  • Reidsville, North Carolina, United States
  • Jan 31st
RIDGID 12-R 3/8" PIPE THREADER DIE ***XLNT***

RIDGID 12-R 3/8" PIPE THREADER DIE ***XLNT***

  • Reidsville, North Carolina, United States
  • Jan 31st
RIDGID 6B 1-1/4" THREADER DIE HEAD ***XLNT***

RIDGID 6B 1-1/4" THREADER DIE HEAD ***XLNT***

  • Reidsville, North Carolina, United States
  • Jan 31st
Toledo No. 2 Geared Heavy Duty Pipe Threader

Toledo No. 2 Geared Heavy Duty Pipe Threader

  • Williamsburg, Ohio, United States
  • Jan 31st
Mueller Pipe Reamer # 50076

Mueller Pipe Reamer # 50076

  • Sun City, Florida, United States
  • Jan 31st
RIDGID 00-R Die Head Ratchet

RIDGID 00-R Die Head Ratchet

  • Sun City, Florida, United States
  • Jan 31st
RIDGID 3/8" Pipe Threader Die Head Nice! Fits 00-R Ratchet

RIDGID 3/8" Pipe Threader Die Head Nice! Fits 00-R Ratchet

  • Sun City, Florida, United States
  • Jan 31st
RIDGID 1/2" Pipe Threader Die Head Nice! Fits 00-R Ratchet

RIDGID 1/2" Pipe Threader Die Head Nice! Fits 00-R Ratchet

  • Sun City, Florida, United States
  • Jan 31st
RIDGID 65-RA 1" - 2" PIPE THREADER

RIDGID 65-RA 1" - 2" PIPE THREADER

  • Rock Tavern, New York, United States
  • Jan 31st
Toledo 00 Pipe Die Set Head Handle 1/4", 3/8", 1/2", and 3/4"

Toledo 00 Pipe Die Set Head Handle 1/4", 3/8", 1/2", and 3/4"

  • Archbold, Ohio, United States
  • Jan 31st
Ridgid 12R and 11R Ratchet Head on Handel with Dies

Ridgid 12R and 11R Ratchet Head on Handel with Dies

  • Archbold, Ohio, United States
  • Jan 31st
ARMSTRONG 90R PIPE THREADER W/ DIES 1/2" 5/8" 3/4"

ARMSTRONG 90R PIPE THREADER W/ DIES 1/2" 5/8" 3/4"

  • Rock Tavern, New York, United States
  • Jan 31st
Reed Square Die Adjustable Guide Threader Set 1/8"-3/4" (T2)

Reed Square Die Adjustable Guide Threader Set 1/8"-3/4" (T2)

  • South Shore, Kentucky, United States
  • Jan 31st
Ridgid 700 -- FULLY REBUILT W/ Full Die Set 1/2"-2" rigid pony 300

Ridgid 700 -- FULLY REBUILT W/ Full Die Set 1/2"-2" rigid pony 300

  • Basking Ridge, New Jersey, United States
  • Jan 31st
Ridgid 31A Tri Head Pipe Threader With 2 Piece Handles 1/2" 3/4" & 1" Dies

Ridgid 31A Tri Head Pipe Threader With 2 Piece Handles 1/2" 3/4" & 1" Dies

  • Lawrenceville, Georgia, United States
  • Jan 31st
U.S.A.! RIDGID 00-R MANUAL RATCHET PIPE THREADER W/ 3/4" DIE HEAD

U.S.A.! RIDGID 00-R MANUAL RATCHET PIPE THREADER W/ 3/4" DIE HEAD

  • Tallapoosa, Georgia, United States
  • Jan 31st
1 1/2" die handle and taps

1 1/2" die handle and taps

  • Beaver, Washington, United States
  • Jan 31st
RIDGID Pipe Threader Die Head 1-1/4"

RIDGID Pipe Threader Die Head 1-1/4"

  • Gresham, Oregon, United States
  • Jan 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies