Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 0

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 1

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 2

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 3

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 4

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 5

Waterproof 3.1 Amp Dual USB Charger + LED Rocker Switch + Wires Panel Marine 12V, US $57 – Picture 6

Waterproof 3.1 Amp Dual Usb Charger + Led Rocker Switch + Wires Panel Marine 12v

US $57

Carmel, California, United States
Jan 29th

Open on mobile:
QR code

Dual USB charger 3.1 amps with illuminated on-off switch panel, pre-wired and ready to install. Comes with 30 inch fused harness that attaches to your battery. #cu/swb2/tplt/4sq/bhrn30 Ships from the USA. Charges iPhones, iPads, iPods, GPS and cellphones. This listing is for a pre wired dual USB charger and switch combination that connects to 12 volts with a supplied 30 inch fused harness. The rocker type switch turns on and off the USB charger so it does not draw power when not in use. The switch is illuminated blue when in the on position. The USB charger has a power on blue LED as well. Both the switch and charger are splash proof; the switch has a protective front seal and the USB charger has a front sealing cap. The charger can charge USB accessories at 3.1 amps with the 5 volt output. Connections to the wired panel are with 1/4" quick disconnect crimps. The panel has male connectors that mate with the female connectors of the harness. The harness has 1/4" ring terminals that connect to your battery posts. The switch and charger mount in 1-1/8" holes and are secured by the mounting plate and four screws. A drill pattern is supplied with this listing. Can be mounted in a panel of unlimited thickness. - Repairable replaceable switch. Can be removed from the housing front. Options: -Add a rubber occlusive sealing socket washer. Makes an extra waterproof seal when mounting the socket against a panel. The washer goes between the socket flange or nut, and the panel to seal the assembly. See listing 301066433426 . -Add wires with a fused 30 or 60 inch (5 ft.) wire harness to your socket assembly. The harness comes with of a fuse holder and fuse, and red and black wire connectors to attach to your socket and battery. See listing 121264213736. -Add a mounting hole bore. Allows you to drill or enlarge a hole in your panel or dash to mount this product. See 121486220109.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	12vtechnology
Country/Region of Manufacture	United States
Model	CU/swb2/tplt/4sq/bhrn30