Watts Wd-10-thd 20 Lb. Grease Trap With Threaded Connections

US $190.87

Bloomsburg, Pennsylvania, United States
Aug 6th

Open on mobile:
QR code

Watts WD-10-THD Details The Watts WD-10-THD 20 lb. grease trap with threaded connections prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment. Grease traps like the Watts WD-10-THD are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap. The Watts WD-10-THD Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor). The Watts WD-10 grease trap has a grease capacity of 20 lb., and a flow rate of 10 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity. WATTS WD-10-THD SPECS Length 21 3/4 Inches Width 14 Inches Height 12 Inches Capacity 20 lb. Features Threaded Connections Flow Rate 10 GPM Inlet and Outlet Size 2 Inches Material Steel Type Grease Traps PA1034 ** This item does NOT include any warranty. Please feel free to contact us if you have any questions. **

“Item is new out of the original packaging. This item has damage to the top and the corners are bent inwards.”

Model

WD-10-THD

Country/Region of Manufacture

China

Capacity

20 lb.

Flow Rate

10 GPM

MPN

Does Not Apply

Material