US $13.10
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
UPC | 37103166463 |
Directions
Similar products from Soldering Tips
Hakko T18-D08 T18 Series Chiseled Soldering Tip, 0.80mm for FX-8801 Iron
Hakko T15-1003 T15 Series Tunnel Soldering Tip 9.50mm x 18.30mm for FM-2027
Hakko T16-1006 T16 Series SOP Soldering Tip 8.00mm for FM-2022 Parallel Remover
Metcal STTC-101P Cartridge, Conical P, 1.0mm x 6.5mm (.04".25")
Hakko T18-SB T18 Series Round Soldering Tip, 0.20mm for FX-8801 Iron
Hakko T18-CF3 T18 Series Face Tinned Beveled Soldering Tip, 45 deg 3.00mm
Hakko A1390 Tweezer Tip 4.0mm SOP for SMD 950 Tweezers, 2 PK
Hakko T18-CF4 T18 Series Face Tinned Beveled Soldering Tip, 45 deg 4.00mm
Weller PL100 .05" x .45" Thread-on Precision Tip for Standard & DI Line Heaters
Weller EPH112 .015" x .625" Reach Long Micropoint Tip for EC1302, EC1301
Hakko T16-1007 T16 Series SOP Soldering Tip 10.00mm for FM-2022 Parallel Remove
Weller MT607 .020" x 0.53" MT Series Bevel Tip for MT1501 Soldering Pencil
Weller 0054460499 RT4 Chisel Tip Cartridge for WMRP Pencil
Weller ST2 .093" x 0.750" ST Series Screwdriver Tip for WP25, WP30, WP35, WLC10
Weller EPH101 0.015" x 0.437" Reach Micropoint Tip for EC1302, EC1301 Irons
Weller 0054460999 RT9 Chisel Tip Cartridge for WMRP Pencil
Weller EPH110 .016" x .437" Reach EPH Conical Tip for EC1302, EC1301
Hakko B2875 Cleaning Pin For 2.0 to 2.3mm Diameter Nozzle for FM-2024
Metcal STTC-145P Cartridge, Conical, 0.4mm (0.016 In)
Weller MT602 .100" x 0.39" MT Series Screwdriver Tip for MT1501 Soldering Pencil
People who viewed this item also vieved
40 Watt Trisonic Soldering Iron TS-F239
Weller 60 watt high performance soldering iron wps18mp
AMERICAN BEAUTY 44D, Soldering Tip, Diamond, 0.625 In
Weller WES51 Analog Soldering Station 110/120 Volt / 50 Watt Iron See Details
Soldering Station Clamp Alligator Third Hand Circuit Board Electronics Holder
Scotle IR-PRO-SC Infrared Soldering Station 220V
ACHI IR-PRO-SC Infrared Soldering Station 220V
4 lb. Roll KESTER “Resin Five” 60/40 Solder Wire .032” Dia.
20 Feet Solar Cell BUS WIRE. 5mm x .02mm. Pre soldered
1 oz Silver bearing Solder Paste syringe -
Kester 0.8mm (0.31") 63/37 #50/245 Noclean Core Solder 1 Ounce
Silvabrite 100 lead free solid core Solder[ 2] 1 lb. rolls NR!
Hakko 633-01 Iron Holder products
Brand New Panavise 324 Electronics Work Center
(1) Used Steinel HG 3002 LCD Electronic Air Thermo Control Heat Gun
Hakko FX780-01 N2 Nitrogen Generator
(1) Used Milwaukee 8977 Heat Gun
(1) Used Varitemp VT-750C Heat Gun
ACHI BGA Rework Stencils Set (150 pcs): 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.76 mm
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies