Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 0

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 1

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 2

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 3

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 4

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 5

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze 204 Concrete Sealer Stain, US $52.00 – Picture 6

Westcoat Acid Stain Surface Coat 1 Gal Sc-30 Bronze 204 Concrete Sealer Stain

US $52.00

Moreno Valley, California, United States
Jan 31st

Open on mobile:
QR code

Westcoat ACID STAIN surface Coat 1 Gal SC-30 Bronze (204) Protective sealing & stain New, never opened These are left over from a job my husband did. Acid Stain Made from an acid solution, wetting agents, and metallic ions, Westcoat's Acid Stain penetrates and reacts with concrete and Westcoat cement to produce rich, attractive finishes. When placed on concrete, the stain's metallic ions combine with concrete particles; the resulting oxides produce a variety of mottled colors ideal for both interior and exterior projects. Advantages •Fast Drying • Durable • Mottled Finish • Unique Colors • Penetrating • Long Lasting • Chemical Resistant • UV Resistant Uses SC-30 is designed to penetrate and react with concrete, and Westcoat cement, producing a variety of mottled colors. It can be used on both interior and exterior projects including showrooms, restaurants, cafes, breweries, garage, pool decks, patios and driveways. APPLICATION Thinning SC-30 can be thinned with up to 5 parts of water for staining concrete, and up to 20 parts of water when applying over Westcoat cements. Always do a sample before beginning the job.Thinning will effect the depth of color. Coverage The coverage will vary depending on the surface. Apply as thin as possible at 200-400 square feet per gallon on most surfaces, depending on strength. Applying Product Using a plastic garden sprayer, spray the SC-30 Acid Stain onto the surface evenly. Immediately after spraying brush or broom the material into the concrete in a circular fashion. Whether brushing or brooming, do so consistently, as it will effect how the acid reacts.As you brush the acid, it will foam and react with the concrete. Varying degrees of foaming will occur in different areas and color may not show rightaway. This is a chemical reaction and some colors react slower than others.You must continue to apply fresh acid ahead of the brush. Once the foaming has stopped, the acid reaction is complete. Make sure to apply fresh material to each new area.The foamed material should not be applied to the untreated area, as it will not chemically stain the surface properly. Additional applications may be done to darken the surface further after the first application has dried. (You may also wish to work 2 to 3 colors into the surface to achieve a unique look). Once the surface has reacted and dried (usually 2-6 hours) you must scrub and rinse off all residue completely. This could be considered the most difficult part of the application.You can take advantage of this time to confirm the color, as the water will simulate the “wet look” of solvent-based sealers. Additional stain may be applied at this point, but you need to rinse again. Make sure to scrub, mop, completely rinse the surface and allow to dry. Be sure to safely and properly dispose of the residue.Failure to completely remove all residues prior to sealing the surface will cause appearance defects, adhesion loss or peeling, reduced durability, and possible bonding failure and delaminating of the sealer. .

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	SC-30
Country/Region of Manufacture	United States
Brand	Westcoat
MPN	Bronze (204)