Wholesale, Retail Lots

The average price for current category was $875.80 last month.

There are 430 ads in this category.

LOT 280 NEW  Nickel 1/4" L-Shaped Cabinet Shelf Supports

Lot 280 new nickel 1/4" l-shaped cabinet shelf supports

  • Hialeah, Florida, United States
  • Oct 22nd
READ BEFORE YOU BID LOT 280 NEW Nickel 1/4" L-Shaped Cabinet Shelf Supports
All Current Products PC125RA Right Angle Conduit Clamp 1-1/4'' Pack Of 25!

All current products pc125ra right angle conduit clamp 1-1/4'' pack of 25!

  • Idaho City, Idaho, United States
  • Oct 21st
All Current Products PC125RA Right Angle Conduit Clamp 1-1/4'' Pack Of 25! Box is sealed but rough.
Thomas & Betts 270 Angle Squeeze Connector 90 Degree 3/4'' Cable Lot of 50!

Thomas & betts 270 angle squeeze connector 90 degree 3/4'' cable lot of 50!

  • Idaho City, Idaho, United States
  • Oct 21st
Thomas & Betts 270 Angle Squeeze Connector 90 Degree 3/4'' Cable Lot of 50! Boxes are rough.
Thomas & Betts 270 Angle Squeeze Connector 90 Degree 3/4'' Cable Lot of 40!

Thomas & betts 270 angle squeeze connector 90 degree 3/4'' cable lot of 40!

  • Saint-Laurent, Quebec, Canada
  • Oct 21st
Thomas & Betts 270 Angle Squeeze Connector 90 Degree 3/4'' Cable Lot of 40!
Occunomix Quilted Hard Hat Winter Liner - XX301 12 EACH

Occunomix quilted hard hat winter liner - xx301 12 each

  • Alden, New York, United States
  • Oct 21st
Early buy sale Value winter hard hat liner. 2 packs of 6 = 12 each. 100% Quilted Nylon Shell Foam center layer ( 4mm) Fleece lining No warming pockets, elastic on forehead, insulated ear barrier, or reflective strip Navy 3 layers
3/4" outside ridge cap foam closures 9"on center ribs bug stop /SOLD PER 50 PCS

3/4" outside ridge cap foam closures 9"on center ribs bug stop /sold per 50 pcs

  • Clare, Michigan, United States
  • Oct 21st
Foam closures for ridge cap weather /bug seal ,fits 3/4" high +9"on center rib design (most manufacturers use this design )we will ship any quantity you need comes in 4 pack but to save you money we will decide packs !these are good quality ridge cap closures comes with adhesive on to keep them on while installing !(SOLD PER 50 PCS)
Varian Mixer HPLC Part

Varian mixer hplc part

  • Temecula, California, United States
  • Oct 21st
Varian Mixer HPLC PART Varian Mixer taken from HPLC unit 50/60hz 9V .5A Condition- USED- HAS NOT BEEN TESTED- 14-DAY MONEY BACK GUARANTEE. Some cosmetic wear from use and storage as pictured. Surplus inventory came from a large company.
1000-Ft Roll 12-2 NM-B AWG Gauge Indoor Electrical-Wire Yellow Romex 20-Amp -NEW

1000-ft roll 12-2 nm-b awg gauge indoor electrical-wire yellow romex 20-amp -new

  • Vineland, New Jersey, United States
  • Oct 20th
NEW -1000' ROLL -12/2 ROMEX 20AMP WIRE
Rent-A-Fence Chain Link Fence Panels, Construction Fence, Temp Fence

Rent-a-fence chain link fence panels, construction fence, temp fence

  • Russell Springs, Kentucky, United States
  • Oct 20th
Brand New 12' x 6' Chain Link Fence Panels! Each panel comes with two connectors so you can connect them to each other in a line or enclose an area for security. These are generally used on construction sites or at events for crowd control, but they can be use anywhere a fence is needed...and it's portable!
Stands/Feet for Temp Fence or Construction Rent-A-Fence, Super Heavy Duty Steel

Stands/feet for temp fence or construction rent-a-fence, super heavy duty steel

  • Russell Springs, Kentucky, United States
  • Oct 20th
Brand New Galvanized Steel Temp Fence Stands or "Feet" as they are sometimes called. These super heavy duty stands are constructed of 1-3/8" 16ga steel framework with SOLID Steel upright pegs. If you use temp fence then you know the uprights are the first thing to wear out.
hm knock down frames

Hm knock down frames

  • Montclair, California, United States
  • Oct 20th
Knock down frames never used
Galvanzied threaded rod

Galvanzied threaded rod

  • Columbiana, Alabama, United States
  • Oct 20th
New galvanized threaded bolt 18 1/2 inches by 3/4 inches. 1.65lbs. Comes with nuts.
Express Periwinkle PURPLE V-Neck SWEATER Large ~ L/S Shirt Top SOFT RAYON KNIT

Express periwinkle purple v-neck sweater large ~ l/s shirt top soft rayon knit

  • West Bloomfield, Michigan, United States
  • Oct 20th
Women's sweater by Express, size Large. In excellent condition-very minor signs of wear/use near underarms (see pic #10). Beautiful periwinkle, light purple color.
Underbridge Inspection Truck, Snooper, Aspen Aerials, Reach All

Underbridge inspection truck, snooper, aspen aerials, reach all

  • Raynham, Massachusetts, United States
  • Oct 20th
DFM underbridge inspection truck, snooper, runs great, call 774-259-1303
Razor Wire Set

Razor wire set

  • Raleigh, NC, United States
  • Oct 19th
Aspen Aerials, Snooper, Paxton Mitchell, Underbridge Inspection Truck,reach All

Aspen aerials, snooper, paxton mitchell, underbridge inspection truck,reach all

  • Raynham, Massachusetts, United States
  • Oct 19th
Aspen Aerials A62 under bridge  inspection truck, snooper, runs great, call 774-259-1303
Diamond POLY ROPE 3/4' X 50'

Diamond poly rope 3/4' x 50'

  • South West City, Missouri, United States
  • Oct 19th
Excellent knot retention makes this rope ideal for many applications . Doesn't tangle, unravel, or shed like twisted natural fiber ropes. Safe work load: 660 lbs, Break strength : 2640 lbs.
10 BLADE CASE -10" WET CUT DIAMOND BLADE CONCRETE BRICK ASPHALT CUTTING 7000 RPM

10 blade case -10" wet cut diamond blade concrete brick asphalt cutting 7000 rpm

  • South West City, Missouri, United States
  • Oct 19th
10 BLADE CASE -10" WET CUT DIAMOND BLADE CONCRETE BRICK ASPHALT CUTTING 7000 RPM MAX - 10 BLADE CASE 10" WET CUT DIAMOND BLADE CONCRETE BRICK ASPHALT GRANITE 7000 MAX RPM BRAND NEW Powered by SixBit's eCommerce Solution
10 " Carbide tipped Saw blade  120 teeth Framing and Ripping  10 blade case

10 " carbide tipped saw blade 120 teeth framing and ripping 10 blade case

  • South West City, Missouri, United States
  • Oct 19th
10 " Carbide tipped Saw blade 120 teeth Framing and Ripping 10 blade case 10 diameter 1 arbor with 5/8 adapter (most miter saws and table saws are 5/8 arbor) 120 C3 Carbide teeth for ultra fine cut Blade can be resharpened 2 MM kerf thickness Up to 6000 RPM (most saws are 3450 RPM) Powered by SixBit's eCommerce Solu

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies