+ Post new Ad
Widia / Hanita 3552573 1" x 1" X 1 3/4" X 4 1/2", R.03 Carbide End Mill 5 flute, US $190 – Picture 0
Widia / Hanita 3552573 1" x 1" X 1 3/4" X 4 1/2", R.03 Carbide End Mill 5 flute, US $190 – Picture 0

Widia / Hanita 3552573 1" X 1" X 1 3/4" X 4 1/2", R.03 Carbide End Mill 5 Flute

US $190

  • Houma, Louisiana, United States
  • Jun 17th
Open on mobile:
QR code
Widia / Hanita 3552573 1" x 1" X 1 3/4" X 4 1/2", R.03  Carbide End Mill 5 flute Coating:AlTiNCorner Radius:0.762mmCut Diameter (decimal):1.0000Cut Diameter (in):1"Cut Diameter (mm):25.400Cut Type:Non-CenterHelix Angle:38°Length of Cut (decimal):1.7500Length of Cut (in):1-3/4"Length of Cut (mm):44.450Material:CarbideNumber of Flutes:5Overall Length (decimal):4.5000Overall Length (in):4-1/2"Overall Length (mm):114.300Series:5V0SShank Diameter (decimal):1.0000Shank Diameter (in):1"Shank Diameter (mm):25.400Shank Style:Weldon FlatSystem of Measurement:InchType:Finishing & Roughing Corner Radius End MillProduct Weight:0.691 lbs.Applications:Use in steel <40 Rc, stainless steel, cast iron, ductile iron, and high temp alloysNotes:Unequal flute spacing for chatter free machining resulting in a better surface finish Excellent performance in both slotting and profiling operations Provides smooth, silent machining, maximizes productivity Effective in extreme conditions and at high surface speeds Available in various corner styles for increased corner protection AlTiN coated for extended tool life

Directions

Similar products from End Mills Router & Drill Bits

NOS QUALCUT UK 1&#034; x 60 Degree INVERTED DOVETAIL CUTTER 12mm Shank WRNA.2.5

NOS QUALCUT UK 1" x 60 Degree INVERTED DOVETAIL CUTTER 12mm Shank WRNA.2.5

  • Perth, Ontario, Canada
  • Jun 17th
NOS QUALCUT UK 1/2&#034; x 45 Deg DOVETAIL CUTTER 12mm Screwed Shank End Mill WRNA2.7

NOS QUALCUT UK 1/2" x 45 Deg DOVETAIL CUTTER 12mm Screwed Shank End Mill WRNA2.7

  • Perth, Ontario, Canada
  • Jun 17th
(Machinist Lot of 7) Assorted 5/16&#034; Garr Carbide TiALN 4FL End Mill *NR* B 276

(Machinist Lot of 7) Assorted 5/16" Garr Carbide TiALN 4FL End Mill *NR* B 276

  • Dallas, Texas, United States
  • Jun 17th
1-11/16&#034; DRILL BIT Taper Shank 14&#034; LONG

1-11/16" DRILL BIT Taper Shank 14" LONG

  • Highland Park, Michigan, United States
  • Jun 17th
Import 5/8 2 flute H/S double end mills-4-/12 OAL, 1-1/2LOC per side

Import 5/8 2 flute H/S double end mills-4-/12 OAL, 1-1/2LOC per side

  • Hampstead, Maryland, United States
  • Jun 17th
Solid Carbide End Mill 630 RA 1 x 6 x 3 Carbide .250C/R Garr Tool

Solid Carbide End Mill 630 RA 1 x 6 x 3 Carbide .250C/R Garr Tool

  • Hampstead, Maryland, United States
  • Jun 17th
SNMG 1906 12RP/SNMG643RP Roughing Positive Insert KCP25 Kennametal

SNMG 1906 12RP/SNMG643RP Roughing Positive Insert KCP25 Kennametal

  • Hampstead, Maryland, United States
  • Jun 17th
Widia / Hanita 3640372 1&#034; x 1&#034; X 1 1/2&#034; X 4&#034;, R.03 Solid Carbide End Mill

Widia / Hanita 3640372 1" x 1" X 1 1/2" X 4", R.03 Solid Carbide End Mill

  • Houma, Louisiana, United States
  • Jun 17th
End Mills 0.007

End Mills 0.007

  • New Brighton, Pennsylvania, United States
  • Jun 17th
END MILLS 0.015

END MILLS 0.015

  • New Brighton, Pennsylvania, United States
  • Jun 17th
Widia / Hanita ball nose 2837707 3/4&#034; x 3/4&#034; X 1 1/2&#034; X 4&#034;, Carbide

Widia / Hanita ball nose 2837707 3/4" x 3/4" X 1 1/2" X 4", Carbide

  • Houma, Louisiana, United States
  • Jun 17th
Micro 100 .250 x .500&#034; Depth Carbide Grooving Boring Bar Tool (Q 586)

Micro 100 .250 x .500" Depth Carbide Grooving Boring Bar Tool (Q 586)

  • Dallas, Texas, United States
  • Jun 17th
END MILL HIGH SPEED (.1875&#034;) 3/16&#034; DIAM 2FLUTE DOUBLE END STUB HANITA NEW $3.50

END MILL HIGH SPEED (.1875") 3/16" DIAM 2FLUTE DOUBLE END STUB HANITA NEW $3.50

  • North Tonawanda, New York, United States
  • Jun 17th
Champion Cutting Tool Corp Champion Cutting Tool XLVC-1/4 High Performance Tiain

Champion Cutting Tool Corp Champion Cutting Tool XLVC-1/4 High Performance Tiain

  • USA, United States
  • Jun 17th
(Lot of 5) 1/2&#034; Hanita Varimill Carbide TialN 4 Flute .020 CR End Mill (B 274)

(Lot of 5) 1/2" Hanita Varimill Carbide TialN 4 Flute .020 CR End Mill (B 274)

  • Dallas, Texas, United States
  • Jun 17th
(Machinist Lot of 5) 1/2&#034; Kennametal Carbide TiN 4 Flute End Mill *NR* (B 273)

(Machinist Lot of 5) 1/2" Kennametal Carbide TiN 4 Flute End Mill *NR* (B 273)

  • Dallas, Texas, United States
  • Jun 17th
RSF-187-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

RSF-187-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

  • Glendale, Arizona, United States
  • Jun 17th
RSF-312-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

RSF-312-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

  • Glendale, Arizona, United States
  • Jun 17th
RSF-500-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

RSF-500-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

  • Glendale, Arizona, United States
  • Jun 17th
RSF-250-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

RSF-250-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

  • Glendale, Arizona, United States
  • Jun 17th

People who viewed this item also vieved

3/8C import broach new (929-183A)

3/8C import broach new (929-183A)

  • Oxford, Pennsylvania, United States
  • Jan 30th
HOUGEN ROTABROACH CUTTER 2 7/8&#034; DIA. BY 3&#034; DEEP x 1 1/4&#034; SHANK

HOUGEN ROTABROACH CUTTER 2 7/8" DIA. BY 3" DEEP x 1 1/4" SHANK

  • Roseville, California, United States
  • Jan 30th
BDE323R001 Grade IN1530 Ingersol Carbide Inserts 1 pc lot

BDE323R001 Grade IN1530 Ingersol Carbide Inserts 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
TS321P Carbaloy Triangle Insert Seat 1 pc lot

TS321P Carbaloy Triangle Insert Seat 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
10 New SANDVIK RNG 45T0320, RNGN 120700T01020 Grade 670 Whisker Ceramic Inserts!

10 New SANDVIK RNG 45T0320, RNGN 120700T01020 Grade 670 Whisker Ceramic Inserts!

  • VADODARA, GUJARAT, India
  • Jan 30th
10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &amp;

10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &

  • VADODARA, GUJARAT, India
  • Jan 30th
CARBIDE BURR SD-2 BALL SHAPE 5/16&#034; HD,1/8 INCH SHANK DIAM. FITS PENCIL GRINDER!

CARBIDE BURR SD-2 BALL SHAPE 5/16" HD,1/8 INCH SHANK DIAM. FITS PENCIL GRINDER!

  • Bayville, New York, United States
  • Jan 30th
CARBIDE BURR SA-53 Brazed, 1/8&#034; SHANK DIAMETER, 1/2&#034; LOC, 4&#034; LOS BRAND NEW!!

CARBIDE BURR SA-53 Brazed, 1/8" SHANK DIAMETER, 1/2" LOC, 4" LOS BRAND NEW!!

  • Bayville, New York, United States
  • Jan 30th
Best Company Steel Stamping Set 1/8&#034; Number Set 0 - 9 VGC

Best Company Steel Stamping Set 1/8" Number Set 0 - 9 VGC

  • Lisbon, Ohio, United States
  • Jan 30th
Roper Whitney Co. No 5 Jr Hand Punch - Complete Set Metal Punch Aluminum Punch

Roper Whitney Co. No 5 Jr Hand Punch - Complete Set Metal Punch Aluminum Punch

  • Hollywood, Florida, United States
  • Jan 30th
Reiff &amp; Nester Spiral Flute Reamers (8)

Reiff & Nester Spiral Flute Reamers (8)

  • Moulton, Iowa, United States
  • Jan 30th
NEW M.A. FORD CARBIDE REAMER 3/8&#034; #27237500LT TIN COATED

NEW M.A. FORD CARBIDE REAMER 3/8" #27237500LT TIN COATED

  • Wadley, Alabama, United States
  • Jan 30th
Dado set f s tools 53dl08

Dado set f s tools 53dl08

  • Thaxton, Virginia, United States
  • Jan 30th
Jewelry Malco HSS 1 1/4 x 0.012 x 3/8 Slitting Slotting Saw Blades

Jewelry Malco HSS 1 1/4 x 0.012 x 3/8 Slitting Slotting Saw Blades

  • Macks Creek, Missouri, United States
  • Jan 30th
6 USED SOLID CARBIDE BORING BARS. 3/16&#034; SHANK. MICRO 100 STYLE. B-120500 (F182}

6 USED SOLID CARBIDE BORING BARS. 3/16" SHANK. MICRO 100 STYLE. B-120500 (F182}

  • Mentor, Ohio, United States
  • Jan 30th
6 USED SOLID CARBIDE BORING BARS. 3/16&#034; SHANK. MICRO 100 STYLE. B-140400 (F195}

6 USED SOLID CARBIDE BORING BARS. 3/16" SHANK. MICRO 100 STYLE. B-140400 (F195}

  • Mentor, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies